checkAd

    Arcam AB - 3D-Druckanbieter - 500 Beiträge pro Seite (Seite 3)

    eröffnet am 17.12.12 17:54:59 von
    neuester Beitrag 15.09.19 16:54:40 von
    Beiträge: 1.201
    ID: 1.178.361
    Aufrufe heute: 0
    Gesamt: 99.135
    Aktive User: 0

    ISIN: SE0005676160 · WKN: A1XCDW
    34,00
     
    USD
    +9,68 %
    +3,00 USD
    Letzter Kurs 26.03.19 Nasdaq OTC

    Werte aus der Branche Pharmaindustrie

    WertpapierKursPerf. %
    0,7500+50,00
    0,7630+26,53
    5,0800+25,43
    1,4900+24,17
    1,2500+22,55
    WertpapierKursPerf. %
    3,8500-16,12
    7,5000-16,67
    1,8195-22,24
    1,4600-27,00
    3,6400-38,62

     Durchsuchen
    • 1
    • 3

    Begriffe und/oder Benutzer

     

    Top-Postings

     Ja Nein
      Avatar
      schrieb am 30.12.15 19:33:50
      Beitrag Nr. 1.001 ()
      Der 3d Korb wurde komplett umgeschichtet(UBS)

      Wenn ich micht recht erinnere war dort Arcam im Sommer noch auf Platz 7 oder 8

      http://www.solactive.com/wp-content/uploads/solactiveip/en/F…
      2 Antworten
      Avatar
      schrieb am 30.12.15 19:46:15
      Beitrag Nr. 1.002 ()
      Sehr interessant! Der Index sieht ja verheerend aus, da ist noch ne Menge Luft nach oben....
      Avatar
      schrieb am 30.12.15 20:35:26
      Beitrag Nr. 1.003 ()
      Antwort auf Beitrag Nr.: 51.389.136 von Heavytrade am 30.12.15 19:33:50Interessant
      Avatar
      schrieb am 01.01.16 13:55:19
      Beitrag Nr. 1.004 ()
      Antwort auf Beitrag Nr.: 51.389.136 von Heavytrade am 30.12.15 19:33:50Die Gewichtungsänderung liegt auch teilweise oder vollständig an der besseren oder schlechteren
      Wertentwicklung der einzelnen Titel.
      Avatar
      schrieb am 01.01.16 14:01:33
      Beitrag Nr. 1.005 ()
      Antwort auf Beitrag Nr.: 51.382.860 von WMaahn am 29.12.15 21:12:55
      Zitat von WMaahn: der galuschka war früher beim aktionär. die kennen sich


      d.h. was?????

      meiner Erfahrungen nach ist Godemode bzw. Börse Go aber um einiges seriöser als das
      Mr. Dausend Blatt der Aktionär:laugh:

      für mich ist das kein Gepushe , sondern einfach Chartechnische Beurteilung
      nach Elliotwaves,… ,… oder was auch immer..

      Gruss S.

      Trading Spotlight

      Anzeige
      Rallye II. – Neuer Anstoß, News und was die Börsencommunity jetzt nicht verpassen will…mehr zur Aktie »
      Avatar
      schrieb am 01.01.16 15:20:55
      Beitrag Nr. 1.006 ()
      Wenn das jetzt mit dem Auftrag im Hintergrund die Initialzündung war, kann man 2016 für den Kurs einiges erwarten, es sei denn, die Börsen gehen im allgemeinen auf Tauchstation.
      Avatar
      schrieb am 04.01.16 19:10:18
      Beitrag Nr. 1.007 ()
      Avatar
      schrieb am 08.01.16 22:23:52
      Beitrag Nr. 1.008 ()
      Naja, hält sich im Salami-Crash noch einigermaßen tapfer, der beste Chart im 3-D-Sektor ist aber der von slm....
      Ich denke, der Gesamtmarkt geht jetzt in eine ausgewachsene Baisse über.
      Der Dax steht jetzt tiefer als Ende 2013 und wir haben den schlechtesten Jahresstart aller Zeiten!!!
      Am 9. März ist Investor Day in Boston, mal sehen...
      Avatar
      schrieb am 11.01.16 17:39:50
      Beitrag Nr. 1.009 ()
      So, jetzt sieht der Chart auch wieder sch...aus!
      Was für eine blöde Börsenphase, jetzt kommen alle hochbewerteten Aktien stark zurück, ARCAM gehört wohl dazu, da spielt der jüngste Auftrag keine Rolle mehr....:-(
      Avatar
      schrieb am 14.01.16 14:34:52
      Beitrag Nr. 1.010 ()
      http://www.vafinans.se/aktier/nyheter/Arcam-fortfarande-sven…

      Habe mir erlaubt, daß mal mit Google zu übersetzen..Denke man kann folgen:)

      In diesem Jahr die Planung sowohl Airbus und GE scharfe Produktion von 3D-gedruckte Metallteilen für Flugzeugtriebwerke. Schwedisch Arcam spielt eine zentrale Rolle bei diesen Bemühungen, aber der CEO des Unternehmens Magnus René will nicht, um es als Durchbruch zu beschreiben.

      Denn es ist bereits geschehen, sagt er in einem Interview mit Finwire:

      - Es ist seit langem bekannt, dass sie über die 3D-Druckflugzeugteilen aus Metall zu beginnen waren. Wir haben eine lange Zeit mit Airbus und verschiedenen Lieferanten für sie, es zu tun gearbeitet, so ist es wirklich.

      Wie weit ist diese Arbeit, Airbus begann, als Sie denken, es ist scharf?

      - Der Airbus sagte, ist, dass sie in diesem Jahr in Produktion gehen. So ist es weit fortgeschritten. Es ist ein langer Prozess, um die Herstellungsverfahren für die Luftfahrtindustrie zu validieren. Wir verkauften die erste Maschine, die Airbus im Jahr 2006, so dass es vor langer Zeit.

      Wie wird dieser Schritt werden sie in diesem Jahr stattfinden wird Ihre Planung, Positionierung und Chancen aus?

      - Im Fall von diesem Schritt ist es nicht so, dass wir durch die Pressemitteilungen von Airbus zu finden. Wir haben mit Airbus und Rolls-Royce und GE kontinuierliche und langfristige gearbeitet, so ist es nicht, dass wir plötzlich entdecken, dass "oops, wird Airbus Zeug zu haben?" Aber es ist etwas, was wir schon lange bekannt sind. Also, was wir tun und wurden in letzter Zeit mit der Expansion in Göteborg und Montreal zu tun ist, weil wir kommen sehen.

      Was denken Sie, bedeutet es für Ihre Möglichkeiten, um Aufträge mit ein wenig mehr Volumen zu bekommen?

      - Mit Blick auf die vergangenen zwölf Monate haben wir drei Aufträge, die etwas größer sind erhalten. Man kann sicherlich erwarten, dass es weitere Aufträge dieser Art zu sein. Was ist oben auf unserer Agenda ist es, uns in die Produktion in der Luft- und Raumfahrt und dem Implantat-Industrie zu erhalten. Und da sind wir in der Praxis dieser. Wir haben Kunden, die bereits produziert der Verwendung unserer Produkte. Und es ist nicht nur Airbus zu. GE wird auch damit beginnen, in diesem Jahr. Und es ist noch schwieriger, weil es sich um bewegliche Teile für Flugzeugtriebwerke, wirklich fortschrittlichen Funktionen.

      Es ist dies, dass der Durchbruch?

      · Der Durchbruch hat schon vor langer Zeit zu kommen. Nämlich GE - - Sie können eine bessere Qualität als Marke der weltweit größten Luftfahrtunternehmen nicht zu sagen, dass sie beabsichtigen, unsere Ausrüstung für die Produktion der wichtigsten Teile in seine Motoren und dass es sehr wichtig für sie zu verwenden. Besser als es nicht. Jetzt ist die Zeit, um das Unternehmen aufzubauen und auch weiterhin so schnell wie wir können wachsen.

      Früher, sagte Sie, dass Ihre Kapazitäten für einen Zeitraum nicht in der Lage, um die Nachfrage zu erfüllen, und dass es schwierig war, Installateure, Elektriker und Servicetechniker zu finden. Was wissen Sie über sie?

      - In Bezug auf Kapazität beobachtete die ganze Bodenfläche und Geschäftsräume und so weiter. Aber es ist nicht ein Stahlwerk oder eine Zellstofffabrik, haben wir nicht nur eine lokale, wo das Wichtigste ist, die Menschen, die zu montieren, testen, Schiff, und Installation und Wartung der Maschinen. Also die Fähigkeit, viel mehr ist als Zimmer in unserem Fall. Da haben wir eine bedeutende Erweiterung von Anlagen zur Pflege gemacht, so dass wir das Unternehmen weiter zu bauen. Wir in der Zahl der Menschen, deutlich gewachsen im letzten Jahr und weiterhin auf EBM Seite wachsen, sondern auch auf der Pulverseite, wo wir von zwei auf fast fünf Pulver Reaktoren erweitert.

      Der CEO des Tochter DiSanto vor kurzem verlassen. Da verkaufte er alle seine Aktien ist nicht unvernünftig anzunehmen, dass er gezwungen war, zu gehen, wahrscheinlich aufgrund der Probleme beim Betrieb. Was war der Hintergrund?

      - Wir haben noch nicht bekannt gegeben, aber wir denken, wir haben viel mehr Möglichkeiten, um dieses Geschäft zu wachsen, schneller als wir jetzt tun. Wir haben einen größeren Ehrgeiz für das Wachstum als bisherige Management hatte.

      Sie bewegt Ihr Betriebs Basis Molndal nach Montreal, was ist die Idee dahinter?

      - Wir bauen diese Unternehmen zu einem internationalen Geschäft, wo wir haben Niederlassungen in verschiedenen hält in der Welt und in denen es wichtig ist, so nah an den Kunden möglich sein. Es ist sehr wichtig.

      Arcam wird ein Unternehmen in Schweden drei Jahre bestimmt?

      - Ja, ich denke schon, aber die Basis war in dieser Art von Unternehmen sind Sie immer an ist. Obwohl drei Jahren wurden die meisten EBM Abschnitt in Schweden. Wir sind eine schwedische Firma in dieser Gruppe wird in Schweden aufgenommen. Wir sind an der Stockholmer Börse notiert. Auf der anderen Seite, nur 30 Prozent unseres Besitzer sind Schweden, ist 40 Prozent des Eigentums in den Vereinigten Staaten. Praktisch keiner unserer Verkäufe sind in Schweden. So ist es klar, dass ein Unternehmen wie unseres muss sehr international sein. Aber es gibt nichts merkwürdig darüber. Es gibt viele schwedische Unternehmen mit schwedischen Basis aber sehr groß ist international. Und in Bezug auf die Nähe zum Markt, den Kunden.
      Avatar
      schrieb am 14.01.16 18:39:07
      Beitrag Nr. 1.011 ()
      Habe herzlich gelacht: "Wie weit ist diese Arbeit, Airbus begann, als Sie denken, es ist scharf?"
      1 Antwort
      Avatar
      schrieb am 14.01.16 22:42:55
      Beitrag Nr. 1.012 ()
      Antwort auf Beitrag Nr.: 51.493.911 von Harpagornis am 14.01.16 18:39:07Hätte besser hier nicht mehr reingeschaut

      Werde nichts mehr posten

      Arbeit um sonst.
      Avatar
      schrieb am 15.01.16 10:49:02
      Beitrag Nr. 1.013 ()
      Das war doch nicht böse gemeint, ein wenig Humor in dieser fatalen Börsenlage tut doch ganz gut.... (die Google-Übersetzer taugen bis heute nichts).
      2 Antworten
      Avatar
      schrieb am 15.01.16 18:10:50
      Beitrag Nr. 1.014 ()
      Avatar
      schrieb am 19.01.16 22:23:57
      Beitrag Nr. 1.015 ()
      Antwort auf Beitrag Nr.: 51.498.603 von Harpagornis am 15.01.16 10:49:02http://www.wiwo.de/technologie/forschung/im-lasergewitter-3d…

      3D-Drucker sollen Zulieferer ersetzen

      http://www.handelsblatt.com/unternehmen/industrie/airbus-ste…
      1 Antwort
      Avatar
      schrieb am 20.01.16 10:47:45
      Beitrag Nr. 1.016 ()
      Antwort auf Beitrag Nr.: 51.532.284 von Heavytrade am 19.01.16 22:23:57Zitat: "Dazu gibt es auch Gespräche mit dem Hersteller eines extrem leistungsstarken Prototypen in Südafrika, der 2,10 Meter große Stücke produzieren kann."

      mmhhhh, das ist nicht Arcam.....
      Avatar
      schrieb am 28.01.16 22:16:50
      Beitrag Nr. 1.017 ()
      Einen tag 5% hoch, den nächsten 5% runter...kann sich das teil man entscheiden, wo es hin will....
      1 Antwort
      Avatar
      schrieb am 29.01.16 12:05:00
      Beitrag Nr. 1.018 ()
      Antwort auf Beitrag Nr.: 51.605.719 von Harpagornis am 28.01.16 22:16:50Ist aber aktuell nicht nur bei Arcam so. Trifft auch andere Unternehmen und Branchen, Biotech 5% rauf, dann wieder 5% runter. Also ganz ruhig bleiben.
      Avatar
      schrieb am 30.01.16 21:26:10
      Beitrag Nr. 1.019 ()
      Ich habe hier einen sehr interessanten Bericht über das US amerkikanische Unternehmen Stryker gefunden, die verstärkt auf orthopädiche Implantate, speziell aus 3D Druck setzen möchten.
      Welche Rolle dabei Arcam spielt scheint unklar zu sein, ist jedoch meiner Meinung nach das einzige Unternehmen, welches Sinn macht.
      hier noch ein Link:

      http://www.vafinans.se/aktier/nyheter/Stryker-ska-bygga-anla…

      Schönes Wochenende allerseits
      2 Antworten
      Avatar
      schrieb am 31.01.16 00:24:24
      Beitrag Nr. 1.020 ()
      Antwort auf Beitrag Nr.: 51.619.045 von sadokan am 30.01.16 21:26:10Danke für die Info!

      Herzlich willkommen..

      Die US Boys, die wirklich sehr fleisig sind, haben diese Firma noch nicht ausfindig gemacht.

      Link HP:
      http://www.stryker.de/
      Avatar
      schrieb am 31.01.16 13:49:53
      Beitrag Nr. 1.021 ()
      BioArchitects erhält FDA-Zulassung für Titan-Implantate....
      natürlich auch erstellt mit Arcams 3D Druckern....

      http://www.makepartsfast.com/2016/01/9074/3d-printed-titaniu…

      Wenn man dieser Analyse Glauben darf wächst der Markt für 3D-Healthcare Produkte bis 2022 um ca. 22% p.a auf ca. 4 Mrd USD.

      http://news.sys-con.com/node/3640256

      Ich bin mir vor wenigen Tagen ein paar Arcam ins Depot gelegt. Normalerweise lasse ich von Firmen mit diesen Bewertungsmultiples die Finger. Aber die 3D-Printer Technologie wird sich m.E. weiter durchsetzen und der Markt stark überproportional wachsen.
      Und Arcam wird da ganz vorne mit dabei sein.....
      Avatar
      schrieb am 01.02.16 17:05:00
      Beitrag Nr. 1.022 ()
      Antwort auf Beitrag Nr.: 51.619.045 von sadokan am 30.01.16 21:26:10
      Stryker is Committing to 3D Printing with Upcoming Multimillion-Dollar 3D Printing Manufacturing Facility


      http://3dprint.com/117456/stryker-3d-printing-facility/
      Avatar
      schrieb am 03.02.16 15:54:48
      Beitrag Nr. 1.023 ()
      Arcam wird in den USA gerade bei Motley Fool vorgestellt. Könnte es auch nicht besser formulieren:

      http://www.fool.com/investing/general/2016/02/02/ignore-stra…
      1 Antwort
      Avatar
      schrieb am 03.02.16 20:06:35
      Beitrag Nr. 1.024 ()
      Cool! Zu den Risiken (wohl eher für Ami-Käufer), könnte sich Arcam nicht auch direkt an der Nasdaq listen lassen?
      Avatar
      schrieb am 03.02.16 20:13:10
      Beitrag Nr. 1.025 ()
      Dann wird es auch mal Zeit für einen neuen Kursschub, charttechnisch brisant.....
      Avatar
      schrieb am 04.02.16 19:36:49
      Beitrag Nr. 1.026 ()
      Antwort auf Beitrag Nr.: 51.648.355 von linkshaender am 03.02.16 15:54:48
      Siemens investiert € 21,4 Millionen in Metall-3D-Druck-Fabrik in Schweden aus 3D Druck.com - Feb 4, 2016
      Der deutsche Technologiekonzern Siemens, der bereits seit längerem auch auf 3D-Druck setzt, eröffnet in Schweden eine Produktionsstätte ausgerichtet auf die additive Fertigung von Metallteilen.

      Das Unternehmen soll um die € 21,4 Millionen in die neue Fabrik am Standort Finspång, an dem derzeit 20 Mitarbeiter im technischen und operativen Bereich angestellt sind, investiert haben. Dort werden nun Komponenten für Gasturbinen – sowohl fertige Bauteile als auch Prototypen – im additiven Fertigungsverfahren hergestellt.

      Laut Thorbjorn Fors, Globaler Business Director Distributed Generation bei Siemens, sollen durch die Investition neue und verbesserte Komponenten hergestellt werden, aber auch Teile für Reparaturen. So werden für die industrielle Gasturbine SGT-800 beispielsweise Brennspitzen bzw. Teile für deren Reparatur auf Geräten des Herstellers EOS gefertigt. Dadurch können Reparaturzeiten von Monaten auf Wochen gesenkt werden.
      ************************
      Arcam hat sicher seine Berechtigung in bestimmten Bereichen.
      Aber wie in dem Artikel beschrieben eben auch das Risiko:
      Leider sehe hier gegenüber früher immer mehr ein Abdriften zugunsten Laser statt EBM!!!
      Ich hoffe auf Optimierungen/Entwicklungen bei EBM die Verbesserungen bringen um die Konkurrenz nicht davon ziehen lassen.

      Gruss S.
      Avatar
      schrieb am 05.02.16 00:02:06
      Beitrag Nr. 1.027 ()
      Avatar
      schrieb am 05.02.16 10:02:20
      Beitrag Nr. 1.028 ()
      Am Montag gibt es die Q4 Zahlen, spannend!
      Avatar
      schrieb am 08.02.16 09:27:17
      Beitrag Nr. 1.029 ()
      Year- End Report 2015
      Strong growth and significant investments

      Net sales increased by 70% to 576.1 (339,0) MSEK
      Operating income increased by 50.2 (21.7) MSEK
      (including non-recurring costs of approximately 0 (9.3) MSEK)
      Net income amounted to 24.3 (57.7) MSEK
      (including tax effects for 2014 of 15.8 MSEK
      Earnings per share increased to 1.18 (3.10) SEK
      50 (35) EBM systems were delivered during the period
      Order intake amounted to 58 (42) EBM systems
      For the fourth quarter:

      Sales increased by 28% to 176.0 (137.1) MSEK
      Operating income amounted to 14.0 (15.3) MSEK
      Net income increased to 2.7 (15.8) MSEK
      Order intake increased by 29 (21) systems
      16 (15) EBM systems were delivered in the fourth quarter
      Strong growth and significant investments



      2015 was another very active and strong year for Arcam. We have worked hard and focused. Our primary focus has been to continue executing and developing our long-term strategy to put the EBM technology in industrial production. To do that, we have developed all three parts of the Group, EBM systems, metal powders and contract manufacturing. We have grown rapidly and we have made substantial investments in increased capacity to continue to meet our customers demand.

      After a strong fourth quarter, we reached net sales of 576.1 MSEK and an operating profit of 50.2 MSEK for the full year. Sales increased by 70% and operating profit increased by 131%. During the year we booked 58 new EBM orders, an increase of 38% compared with the previous year. We enter 2016 with an order book of 27 systems.

      Business status

      Avio Aero in Turin, Italy, is a subsidiary of GE Aviation. Avio Aero has successfully used and evaluated Arcam´s EBM systems for many years and is now moving into series production of state of the art turbine blades. In connection with this they ordered, by the end of the year, 10 new EBM system and with that order they doubled their installation base.

      Another important reference business is the order from GKN of two Arcam Q20. Together with GKN we are bringing our EBM-technology to series production of aerospace components.

      The deals confirm the great potential of the Arcam EBM technology as a volume production tool for the aerospace industry. We can now see that our aerospace customers are expanding their EBM production facilities.

      In September, our customer Beijing AK Medical Chinese announced that the Chinese authorities approved their EBM manufactured orthopedic implants for sale in China. These are the first additive manufactured implants to be formally approved in China. In connection with this decision Beijing AK Medical decided to go into production with these implants and they ordered another five Arcam Q10 systems.

      During the year our Italian customer Lima has received the five systems they ordered in the end of 2014. Lima has thereby increased its EBM capacity significantly and Lima is the world's largest manufacturer of additively manufactured implants.

      Meanwhile, customers in Japan, Korea, Europe and in the US have introduced new EBM-manufactured products on the market within orthopedics for hips, knees and spine surgery. The EBM technology is therefore now established as a manufacturing method for orthopedic implants.

      Our metal powder manufacturer AP&C in Montreal is growing rapidly with several new customers within Additive Manufacturing. To meet the demand, we took in the beginning of the year a third powder reactor in use and in the autumn we decided to expand AP&C with another two powder reactors. With these investments, AP&C will have five complete production lines, of which four are intended for titanium powder and one is intended for Inconel and other alloys.

      Management changes and infrastructure

      During the year we strengthened our sales and support organization in the US, UK and in China through the recruitment of sales and support engineers. In the UK a new office was inaugurated in Warwick and in the US a new office was opened in Woburn, MA. With the new local offices we move management, customer support and logistics closer to our customers.

      During the third quarter a major expansion of our production facilities in Mölndal, Sweden, was finalized. With the expansion we have doubled our production area and we have also opened a new demo and customer training center.

      During the year we strengthened our marketing organization by setting up a new central marketing function for Arcam Group, based in the US. The new marketing organization will manage and coordinate Arcam's global marketing including branding efforts and product marketing, in order to fully utilize our position in the aerospace and medical implant industry.

      In December Alain Dupont was appointed the new CEO of powder manufacturer AP&C. He succeeds Jacques Mallette who has been CEO of AP&C since 2011 and continues to be involved as Chairman for AP&C.

      Financing and ownership structure

      In May Industrifonden sold its entire holding in Arcam, corresponding to 10.4% of capital and votes. The buyer was the US-based Oppenheimer Funds.

      After the deal Industrifonden has no ownership in Arcam. Industrifonden has been involved in the company since 1999, first as a lender and, since 2002, as an owner.

      Oppenheimer has been a shareholder of Arcam since 2014 and, with the new deal, became the largest owner with more than 15% of the outstanding shares.

      On May 27 we completed a share issue of 1.8 million new shares directed to Första AP-fonden, providing the company with approximately MSEK 250 before transaction costs. Första AP-fonden represents an engaged, long term ownership which the board expects will contribute to the development of the company.

      After those transactions we have a new ownership structure and a very strong cash position. At the end of the third quarter we had approximately 452.9 MSEK in cash. The strong balance sheet provides financial stability that is much appreciated by the large clients we work with in long term projects.

      With some of the world's largest companies as customers, a strong cash position and, most important, a team of dedicated and driven employees, we are well positioned to take advantage of our opportunities in the fast growing market for Additive Manufacturing.

      Mölndal, February 8, 2016

      Magnus René, President & CEO
      Avatar
      schrieb am 08.02.16 19:19:06
      Beitrag Nr. 1.030 ()
      Dafür das die Umsätze um 28 % gestiegen sind ist der Kurs mal locker um 17% gesunken.


      Was ist der Grund?
      1 Antwort
      Avatar
      schrieb am 08.02.16 19:58:00
      Beitrag Nr. 1.031 ()
      Antwort auf Beitrag Nr.: 51.689.347 von bluechip56 am 08.02.16 19:19:06Na ja, zunächst herrscht erst mal Crash-Stimmung. Jegliche Investitionen werden hinterfragt und ggf. negativ bewertet. Wie nachhaltig ist das Geschäft noch? Da vergisst man schon mal den guten AE im Q4 zu berücksichtigen.

      Für Zahlenmenschen sind die Erträge nun auch schon 2 Quartale rückläufig. Dieses Risiko führt aktuell zu dramatischen Kursverlusten. .. und Verluste von 10% sind bei Risikowerten derzeit keine Ausnahme.
      Avatar
      schrieb am 08.02.16 21:55:41
      Beitrag Nr. 1.032 ()
      Das was da heute vermeldet wurde, war alles kalter Kaffee!
      Avatar
      schrieb am 08.02.16 22:04:34
      Beitrag Nr. 1.033 ()
      Ohne die heutigen Zahlen wäre der Kurs- auch im Crash- höchstens um die Hälfte abgestürzt, tja dumm gelaufen!
      Avatar
      schrieb am 09.02.16 22:25:37
      Beitrag Nr. 1.034 ()
      Jetzt gehts wieder Richtung 10 Euro...
      Schon komisch, dass hier bisher überhaupt keine Kommentare zu den (eher mauen) Zahlen gepostet wurden, sind wohl wieder alle raus.
      Avatar
      schrieb am 10.02.16 17:59:10
      Beitrag Nr. 1.035 ()
      Hohes Volumen bei fallenden Kursen....gefällt mir gar nicht.
      1 Antwort
      Avatar
      schrieb am 10.02.16 18:05:43
      Beitrag Nr. 1.036 ()
      Antwort auf Beitrag Nr.: 51.711.484 von Harpagornis am 10.02.16 17:59:10Heute allerdings schon fast wieder normal.
      Avatar
      schrieb am 10.02.16 22:05:49
      Beitrag Nr. 1.037 ()
      Im Steigemodus lagen die Umsätze stets weit unter 100 K in Stockholm. So normal ist das bisher noch nicht.
      Avatar
      schrieb am 10.02.16 22:35:20
      Beitrag Nr. 1.038 ()
      Irgendwie sind die Börsianer irre: eine Tesla liefert gerade Zahlen weit unter den Erwartungen ab, der Kurs steigt 6%, ARCAM in line und fällt seit Bekanntgabe fast 20%.
      Was haben die da eigentlich erwartet?
      1 Antwort
      Avatar
      schrieb am 10.02.16 22:39:55
      Beitrag Nr. 1.039 ()
      Antwort auf Beitrag Nr.: 51.714.145 von Harpagornis am 10.02.16 22:35:20Auch gerade gelesen. Andere wären bei den Ergebnissen richtig abgesackt. Verrückte Börsenwelt.
      Avatar
      schrieb am 10.02.16 23:13:43
      Beitrag Nr. 1.040 ()
      Ihr vergesst alle das Arcam Pulverhersteller gekauft hat...
      Das kostet Geld und schlägt sich im EPS nieder!
      Der Kauf ist aber strategich genial !

      Und hier noch was für die Pesimisten:cool:

      http://bikeshop.geaviation.com/advanced-manufacturing/fett/#…

      In the GE article there is a link to this article about Avio.. you will have to use Google to translate but it gives a good over view of who is doing what work on the LPT... We can see the two section that EBM gets to do...

      http://www.magazineabout.com/ge9x_4.html

      Starting from the partner IHI, which was involved in the production of turbine discs stadium from the 1st to the 5th, the same sequence stadiums for the ISS (inter internship seal), the rotor blades of the 1st, 2nd and 3rd stages and components such as Cone and Shaft C-Sump. Snecma, however, has mainly worked to TRF (turbine rear flanges), a central component of a sub-module that contributes to the final LPT module. Coming to Avio Aero, we have a terrific example of the part of each of our plant cooperation, with their excellence and ability which carries the components of the turbine module of its authority to make them arrive at Pomigliano, the nerve center for the final assembly, and thus reaching a single goal. Rivalta is the production center of the discs and the ISS for the 6th stage, as well as for the first 3 stages of the shrouds. Brindisi will handle the enormous casing, the outer casing of the turbine, with a diameter of 2 meters, even higher than that of the GEnx. In Bielsko Biala then produce the stator blades (nozzles) from the 1st to the 6th stage and the nozzles. Cameri, with specialties dell'additive manufacturing, produces the blades of the stages 5 and 6 titanium aluminum representing one of the technological innovations of the program. Finally, Pomigliano is the Avio Aero center that produces the 4th, 5th and 6th stage of the shrouds (the 4th and 5th are hybrids made ??for the first time on an engine) and rotor blades of the 4th stage. But it is also the center where a new area (called CRO & Assembly, previously occupied by service activities whose volumes have been gradually reduced) for the collection of all these parts and final assembly of the turbine module has been completely redesigned and rearranged , in addition to the mounting of Fun Hub Frame as is already the case for the same component on the GEnx. "To realize the new area in Pomigliano we initially invested around 2.7 million Euros, used to the layout of the first assembly line and all the equipment of tools and utensils," said Michele Barbato, CRO & Assembly Operations Leader. "In the future we aspire to increase assembly volumes."
      It's basically the catalyst plant because it is the site that in a sense he conducted the orchestra (to use a musical comparison) remembering deadlines and order processes.

      iHub NewsWire
      Global Equity International Inc. Would Like to Welcome Mr. Kevin Wynn to Its Ever Growing Team(GEQU) Feb 10, 2016 10:47 AM
      Advantis Corp. Establishes Advantis Cannabis, LLC in Washington(ADVT) Feb 10, 2016 10:46 AM
      USMJ: Hot Topic Around Wall Street Water Coolers: Two $30 B Market Opportunities Come Together - Cannabis and Sports Nutrition(USMJ) Feb 10, 2016 10:00 AM
      Various Development Advancements for Targeted Treatment Therapies for Rare Diseases & Disorders Lead to Newest Orphan Drug(AMBS) Feb 10, 2016 9:45 AM
      Beverage Industry Growth Outlook Strengthens as Rapidly Growing Flavored & Sparkling Water Market Dominates a Shift in Consumer(MINE) Feb 10, 2016 9:30 AM" target="_blank" rel="nofollow ugc noopener">
      First GE9X Engine takes to the test stand...

      Here is an interesting article about the first GE9X to test... we have a long ways to go before serial production... it is not scheduled to be certified until late 2018... Hence I guess the reason some of those 10 machines will not be delivered until 2017 per Mr. Rene..such a glacial pace... one has to wonder how we ever got from the Wright Brothers to where we are today at this pace...

      http://bikeshop.geaviation.com/advanced-manufacturing/fett/#…

      In the GE article there is a link to this article about Avio.. you will have to use Google to translate but it gives a good over view of who is doing what work on the LPT... We can see the two section that EBM gets to do...

      http://www.magazineabout.com/ge9x_4.html

      Starting from the partner IHI, which was involved in the production of turbine discs stadium from the 1st to the 5th, the same sequence stadiums for the ISS (inter internship seal), the rotor blades of the 1st, 2nd and 3rd stages and components such as Cone and Shaft C-Sump. Snecma, however, has mainly worked to TRF (turbine rear flanges), a central component of a sub-module that contributes to the final LPT module. Coming to Avio Aero, we have a terrific example of the part of each of our plant cooperation, with their excellence and ability which carries the components of the turbine module of its authority to make them arrive at Pomigliano, the nerve center for the final assembly, and thus reaching a single goal. Rivalta is the production center of the discs and the ISS for the 6th stage, as well as for the first 3 stages of the shrouds. Brindisi will handle the enormous casing, the outer casing of the turbine, with a diameter of 2 meters, even higher than that of the GEnx. In Bielsko Biala then produce the stator blades (nozzles) from the 1st to the 6th stage and the nozzles. Cameri, with specialties dell'additive manufacturing, produces the blades of the stages 5 and 6 titanium aluminum representing one of the technological innovations of the program. Finally, Pomigliano is the Avio Aero center that produces the 4th, 5th and 6th stage of the shrouds (the 4th and 5th are hybrids made ??for the first time on an engine) and rotor blades of the 4th stage. But it is also the center where a new area (called CRO & Assembly, previously occupied by service activities whose volumes have been gradually reduced) for the collection of all these parts and final assembly of the turbine module has been completely redesigned and rearranged , in addition to the mounting of Fun Hub Frame as is already the case for the same component on the GEnx. "To realize the new area in Pomigliano we initially invested around 2.7 million Euros, used to the layout of the first assembly line and all the equipment of tools and utensils," said Michele Barbato, CRO & Assembly Operations Leader. "In the future we aspire to increase assembly volumes."
      It's basically the catalyst plant because it is the site that in a sense he conducted the orchestra (to use a musical comparison) remembering deadlines and order processes.

      iHub NewsWire
      Global Equity International Inc. Would Like to Welcome Mr. Kevin Wynn to Its Ever Growing Team(GEQU) Feb 10, 2016 10:47 AM
      Advantis Corp. Establishes Advantis Cannabis, LLC in Washington(ADVT) Feb 10, 2016 10:46 AM
      USMJ: Hot Topic Around Wall Street Water Coolers: Two $30 B Market Opportunities Come Together - Cannabis and Sports Nutrition(USMJ) Feb 10, 2016 10:00 AM
      Various Development Advancements for Targeted Treatment Therapies for Rare Diseases & Disorders Lead to Newest Orphan Drug(AMBS) Feb 10, 2016 9:45 AM
      Beverage Industry Growth Outlook Strengthens as Rapidly Growing Flavored & Sparkling Water Market Dominates a Shift in Consumer(MINE) Feb 10, 2016 9:30 AM
      Avatar
      schrieb am 13.02.16 14:23:00
      Beitrag Nr. 1.041 ()
      Kein bisschen Erholung, ist wohl mal wieder mega out!
      Avatar
      schrieb am 22.02.16 22:28:29
      Beitrag Nr. 1.042 ()
      http://www.t-online.de/lifestyle/gesundheit/id_77050676/mann…

      US-Werte gehen ab, Arcam noch auf Sparflamme.
      1 Antwort
      Avatar
      schrieb am 22.02.16 22:40:41
      Beitrag Nr. 1.043 ()
      Antwort auf Beitrag Nr.: 51.810.076 von Harpagornis am 22.02.16 22:28:29Immer noch besser als Voxeljet, die in NY 9,4% verloren haben.
      Avatar
      schrieb am 23.02.16 18:14:09
      Beitrag Nr. 1.044 ()
      GKNplc Results Announcement for the year ended 31December2015

      GNK released a 2015 year end report. It appears to fulfill a regulatory requirement. Arcam was recognized once in the report.

      GKN plc Results Announcement for the year ended 31 December 2015 - 23 February 2016

      During the year, new work packages won exceeded $3.5 billion over their contract lives and a number of important milestones were achieved, including:

      · The acquisition of Sheets Manufacturing Inc. on 8 June 2015, a technology leader in the manufacture of aircraft engine inlet lip skins with legacy programme positions on the Boeing 747-8 and KC-46 tanker. This acquisition will support GKN Aerospace on the contract awarded for engine inlet lip skins for the Boeing 737Max and Boeing 777X, and work to assemble the Section 47 floor grid for the Boeing 787;

      · Agreeing a new (US$650 million) risk and revenue sharing partnership (RRSP) with Pratt & Whitney covering the supply of components for the PurePower® PW1400-JM Geared Turbofan™ engine for the Irkut MC-21 mid-range, single aisle aircraft;

      · The Filton facility being awarded 'Accredited Member' status by Airbus, the highest level of recognition by the Airbus supply chain and quality improvement programme (SQIP); and

      · Entering into a strategic partnership with Arcam AB to develop and industrialise one of the most promising new additive manufacturing (AM) processes to meet the needs of the expanding future aerospace market. Production orders were received for AM parts flying on production aircraft.

      http://www.londonstockexchange.com/exchange/news/market-news…
      Avatar
      schrieb am 25.02.16 10:29:18
      Beitrag Nr. 1.045 ()
      Arcams Tochter AP&C verdoppelt annähernd seine Produktionskapazitäten... Das müssen ja mächtig volle Auftragsbücher sein... Bin gespannt auf die nächsten Zahlen...
      ----
      AP&C continues to invest in powder manufacturing capacity, adds 3 more powder reactors for a total of 8

      Arcam AB, listed on NASDAQ Stockholm, and a leading supplier of Additive Manufacturing (“AM”) equipment, announces that its powder manufacturing subsidiary AP&C in Montreal, Canada, continues to add significant capacity by building three new atomizing reactors. The new capacity increase follows on significant growth in 2015 and a surge in demand for AP&Cs high quality titanium powders.

      AP&C continues to build capacity to address the fast growing market for metal powders for additive manufacturing. AP&C’s Plasma technology converts efficiently raw material to powder with excellent key properties such as flowability, density, chemistry and traceability. With the present build-out AP&C will reach a capacity of at least 500 tons per year.

      “The need for high end titanium powder is driven by the fast growth and adoption of Additive Manufacturing. Arcam is determined to serve the industry through cost efficient solutions thus converting traditional manufacturing into Additive Manufacturing.
      A requisite is to offer highest quality powder for production at competitive cost”,
      says Magnus René, CEO of Arcam.

      “With this investment we are committing to supply our present and future customers with superior quality materials to meet the high manufacturing standards of the biomedical and aerospace industries. With the new reactors and atomizing technology advancements, AP&C will triple production capacity in 2016”, says Alain Dupont, President of AP&C.
      Avatar
      schrieb am 26.02.16 17:58:32
      Beitrag Nr. 1.046 ()
      Schönes Volumen heute in Stockholm, kurz vor Schluss wurde wohl eine Einzelorder über 45K im Bid bedient. Sammelt da wer kräftig ein?
      Avatar
      schrieb am 26.02.16 19:08:09
      Beitrag Nr. 1.047 ()
      Boings neues 3DP Patent
      https://youtu.be/xNUQ8EpHC-g
      1 Antwort
      Avatar
      schrieb am 28.02.16 17:23:34
      Beitrag Nr. 1.048 ()
      Antwort auf Beitrag Nr.: 51.848.662 von Schaeffi am 26.02.16 19:08:09die herrschaften, die hier mit der performance von arcam hadern, möchte ich mal ganz dezent auf eine weitere schöne tochter an der schwedischen börse aufmerksam machen.
      sie nennt sich fingerprint cards, ist außerhalb schwedens noch wenig bekannt und war 2015 mit einem plus von 1.400 prozent europas best performende aktie.

      ich hab dazu einen neuen thread eröffnet und ein paar infos reingestellt. der alte aus dem jahre 2007 war schon stillgelegt. ihr findet ihn hier: http://www.wallstreet-online.de/diskussion/1227532-1-10/fing…
      Avatar
      schrieb am 01.03.16 16:18:16
      Beitrag Nr. 1.049 ()
      Der Jahresbericht wurde gerade veröffentlicht (nur auf schwedisch, englisch folgt): http://www.arcamgroup.com/files/arcam_2015_sv_final.pdf

      Starke Zahlen und Aussichten, was ich so mit meinen äußerste limitierten Schwedisch-Kenntnissen rauslesen kann ;)
      Avatar
      schrieb am 01.03.16 21:53:34
      Beitrag Nr. 1.050 ()
      Verliert den Anschluß, US-Werte seit Tagen fett im Plus :-(
      1 Antwort
      Avatar
      schrieb am 01.03.16 22:03:23
      Beitrag Nr. 1.051 ()
      Antwort auf Beitrag Nr.: 51.876.879 von Harpagornis am 01.03.16 21:53:34Da möchte ich erst einmal die Zahlen diese Woche abwarten. DDD ist ja bereits im Verzug damit.
      Avatar
      schrieb am 03.03.16 22:11:50
      Beitrag Nr. 1.052 ()
      Tja, jetzt knallen die Amis durch die Decke! ARCAM wurde mit minus 20% nach den zahlen belohnt, was für eine Idiotie!
      1 Antwort
      Avatar
      schrieb am 03.03.16 22:26:12
      Beitrag Nr. 1.053 ()
      Antwort auf Beitrag Nr.: 51.897.114 von Harpagornis am 03.03.16 22:11:50Ja, ist schon verrückt. Stratasys schreibt ein hohen Verlust ab, mäßiger Ausblick und trotzdem fliegt der Deckel, auch bei 3D Systems. Man scheint heute sowieso jedes Risiko zu ignorieren, wenn ich mir so manchen Driller und Ölproduzenten anschaue. So schnell ändert sich das Sentiment an der Börse. Vor einem Monat war überall die Suche nach dem Haar in der Suppe gefragt, zur Zeit wird wieder das Risiko gesucht.
      Avatar
      schrieb am 10.03.16 12:52:33
      Beitrag Nr. 1.054 ()
      Von Charttechnik habe ich nicht viel Ahnung (und halte auch nicht so viel davon), aber das was ARCAM hier zur Zeit liefert, sieht irgendwie brisant aus:
      http://www.nasdaqomxnordic.com/shares/microsite?Instrument=S…
      1 Antwort
      Avatar
      schrieb am 10.03.16 13:25:35
      Beitrag Nr. 1.055 ()
      Antwort auf Beitrag Nr.: 51.948.948 von Harpagornis am 10.03.16 12:52:33definiere "brisant", was möchtest du uns sagen? Sie knabbern wieder am 52-/Jahres-Hoch....
      Avatar
      schrieb am 11.03.16 20:42:45
      Beitrag Nr. 1.056 ()
      Investor Day Presentation - machine estimation

      http://www.arcamgroup.com/files/arcam-investor-day-march-9-2…
      Avatar
      schrieb am 14.03.16 18:22:29
      Beitrag Nr. 1.057 ()
      3D systems voll irre! Schade, dass ARCAm nicht in den USA notiert und miese Zahlen geliefert hat...
      Avatar
      schrieb am 15.03.16 10:54:39
      Beitrag Nr. 1.058 ()
      Avatar
      schrieb am 15.03.16 14:29:19
      Beitrag Nr. 1.059 ()
      Snecma and Mecachrome developed a special manufacturing process for TiAI blades, and even created a complete production facility. Located at Mecachrome's plant in Sablé-sur-Sarthe, the new production line will require an investment of 60 million euros and create 150 specific jobs. Volume production will kick off in 2015, with a sharp ramp-up already in 2016, on the way to achieving the planned production rate of one blade every three minutes in 2019.

      http://www.safran-group.com/media/20140414_snecma-safran-and…
      Avatar
      schrieb am 26.03.16 14:29:40
      Beitrag Nr. 1.060 ()
      Ami-werte mit schönen Aufwärtstrends, die scheinbar führende Spitzen-3D-Firma ARCAM kommt nicht vom Fleck...
      Avatar
      schrieb am 29.03.16 18:27:55
      Beitrag Nr. 1.061 ()
      Der wert ist Müll.....................SLM scheint da die Nase vor zu haben.
      Avatar
      schrieb am 01.04.16 23:39:36
      Beitrag Nr. 1.062 ()
      Müll.. sind deine Beiträge zu Arcam und dein Anlageverhalten!

      Selbst nichts aber auch gar nichts zu re­cher­chie­ren aber nur sich aufregen über keinen Gewinnn jede Woche von 10 % zeugt von ... ich sag mal so...einfach mal reifer werden und Gelassenheit!

      Solltest dein Erbe besser verprassen!

      Bleibe Arcam treu und ich weis auch warum.
      Avatar
      schrieb am 02.04.16 10:25:10
      Beitrag Nr. 1.063 ()
      The TiAl blades assembled on the turbines for the largest commercial engines go through two Avio Aero centers of excellence.

      Additive manufacturing and titanium aluminum are now a part of everyday language for our Engineering and Supply Chain colleagues—and many more. They identify materials and processes that are highly innovative for the aviation sector, and also bring substantial benefits, primarily in terms of weight (with a 50% reduction, from 580 g to 240 g for GEnx-2b blades, for example), a variable of obvious importance in this industry.

      Cameri is considered—by Avio Aero and all of GE Aviation—as the European center of excellence for additive manufacturing, and the production of TiAl blades in particular. Blades for low-pressure turbines are made using EMB (Electron Beam Melting) processes to create aircraft components (and more), starting from a pile of TiAl dust. Upstream of this process, there is atomization (which we mentioned in last June's issue of about magazine when we presented the new atomizer at Cameri), which “pulverizes” ingots of TiAl. Downstream, a variety of processing finishes the blade, such as thermal and surface treatments, mechanical processing and coating.

      To date, various operations are contracted outside of Avio Aero, but we're gathering more experience to internally manage these processes.

      The rotor blades of the GE9X (5th and 6th stage), for example, were manufactured in Cameri, assembled on the turbine in Pomigliano and delivered on time for the FETT (First Engine to Test) scheduled for the end of March. Cameri will also manufacture those for the SETT (Second Engine to Test) of the 9X.

      And for Cameri, 2016 began with a new important order by the customer: two thousand blades for the 5th rotor stage to manufacture for around 20 GEnx-2b engines, which fly on Boeing 747-8.

      “At this time, Cameri is the only plant qualified to manufacture 5th and 6th stage blades for the LPT GE9X. Indeed, this engine is created for the first time exclusively with TiAl blades made using EBM. For the GEnx, we're the second source: this means that the new TiAl blades made using EBM will replace the TiAl blades made using the spin casting process, and those on engines already in service,” explained Dario Mantegazza, Manufacturing Specialist in Cameri.


      http://www.magazineabout.com/cameri_pomigliano.html
      Avatar
      schrieb am 04.04.16 22:16:05
      Beitrag Nr. 1.064 ()
      1 Antwort
      Avatar
      schrieb am 05.04.16 17:02:21
      Beitrag Nr. 1.065 ()
      Rocket Lab bereitet den Start einer 3D gedruckten Rakete vor

      https://3druck.com/objects/rocket-lab-bereitet-den-start-ein…
      Avatar
      schrieb am 05.04.16 21:36:33
      Beitrag Nr. 1.066 ()
      Dem kurs tun diese ganzen Meldungen überhaupt nicht gut....entwickelt sich zum underperformer im Sektor, warum auch immer.....
      Avatar
      schrieb am 06.04.16 22:15:11
      Beitrag Nr. 1.067 ()
      Die sollten sich an der Nasdaq in NY listen lassen, dann käme hier mal Bewegung rein...
      1 Antwort
      Avatar
      schrieb am 07.04.16 14:00:37
      Beitrag Nr. 1.068 ()
      Antwort auf Beitrag Nr.: 52.133.904 von belliora am 06.04.16 22:15:11Das wird wohl auch nicht helfen
      Avatar
      schrieb am 08.04.16 15:19:16
      Beitrag Nr. 1.069 ()
      Antwort auf Beitrag Nr.: 52.116.239 von Heavytrade am 04.04.16 22:16:05http://aluminiuminsider.com/alcoa-lands-3d-printing-contract…
      Avatar
      schrieb am 08.04.16 16:05:42
      Beitrag Nr. 1.070 ()
      Mit wem wohl SLM kooperiert, dass die so abgeht.....
      Schön wäre, wenn man i.o.g. Artikel mal was zu ARCAM geschrieben hätte...da müssen die Anleger ja sonst um die Ecke denken und das können die leider so gar nicht!
      Avatar
      schrieb am 13.04.16 19:41:58
      Beitrag Nr. 1.071 ()
      Märkte gehen durch die Decke, 3D-Werte auch, warum ARCAM schwächelt, erschließt sich mir nicht.
      Die wird wohl wie üblich bis zu den nächsten Zahlen herumdümpeln, dann wieder kurz abstürzen und sich darauf langsam wieder bis in den Bereich von 180 vorarbeiten.....und so gehts wohl bis in alle Ewigkeit?!
      Avatar
      schrieb am 14.04.16 10:01:28
      Beitrag Nr. 1.072 ()
      Bericht für Qu. 1 kommt am 21.04. 16 raus.

      https://translate.google.de/translate?hl=de&sl=en&u=http://w…
      Avatar
      schrieb am 14.04.16 14:58:41
      Beitrag Nr. 1.073 ()
      War da nicht zeitgleich ein Sit- in mit Alcoa?
      4 Antworten
      Avatar
      schrieb am 14.04.16 15:40:14
      Beitrag Nr. 1.074 ()
      Antwort auf Beitrag Nr.: 52.189.324 von belliora am 14.04.16 14:58:41Gibt es dazu eine Quelle?
      3 Antworten
      Avatar
      schrieb am 14.04.16 22:37:19
      Beitrag Nr. 1.075 ()
      Antwort auf Beitrag Nr.: 52.189.762 von linkshaender am 14.04.16 15:40:14Hi,
      bitte eine Seite im Thread zurückblättern:)
      2 Antworten
      Avatar
      schrieb am 15.04.16 09:59:37
      Beitrag Nr. 1.076 ()
      Antwort auf Beitrag Nr.: 52.193.080 von Heavytrade am 14.04.16 22:37:19Danke.
      Ist schon eine interessante Zusammenarbeit insbesondere mit Hinblick auf den geplanten split bei Alcoa.
      1 Antwort
      Avatar
      schrieb am 15.04.16 11:10:28
      Beitrag Nr. 1.077 ()
      Avatar
      schrieb am 18.04.16 20:01:11
      Beitrag Nr. 1.078 ()
      Avatar
      schrieb am 19.04.16 11:56:18
      Beitrag Nr. 1.079 ()
      Mal sehen, ob die 200 SEK endlich nach oben durchbrochen werden, da zieren sich die Anleger ja schauderhaft! Am 21.4. wird es sehr spannend: Trendfolge oder mal wieder der 30% Absturz.....
      Avatar
      schrieb am 20.04.16 18:43:25
      Beitrag Nr. 1.080 ()
      Avatar
      schrieb am 20.04.16 18:52:11
      Beitrag Nr. 1.081 ()
      Anleger gehen (schon mal) erst mal ? in Deckung.........
      Avatar
      schrieb am 21.04.16 09:41:12
      Beitrag Nr. 1.082 ()
      wie jedesmal nach den Zahlen 10% runter:cry:
      1 Antwort
      Avatar
      schrieb am 21.04.16 10:30:06
      Beitrag Nr. 1.083 ()
      Antwort auf Beitrag Nr.: 52.241.731 von wim45musik am 21.04.16 09:41:12Bei den Zahlen zurecht. Wachstum sieht anders aus.

      Umsatz: Wachstum von Q3 und Q4 gebrochen.
      Operating Income: nur ggü. Q1/15 besser, sonst starker Rückgang.
      AE: Sehr schlechter Wert im Vergleich zu den 2015er Quartalen.
      Avatar
      schrieb am 21.04.16 11:08:39
      Beitrag Nr. 1.084 ()
      Doch nur ein Schrottladen................
      Avatar
      schrieb am 21.04.16 11:10:59
      Beitrag Nr. 1.085 ()
      Guckt eiuch mal die herrlichen Aufwärtstrends der Ami-Werte an, die steigen sogar nach miesen Zahlen....
      ARCAM ist und war wohl massivst überbewertet.
      3 Antworten
      Avatar
      schrieb am 21.04.16 13:39:53
      Beitrag Nr. 1.086 ()
      Antwort auf Beitrag Nr.: 52.242.970 von belliora am 21.04.16 11:10:59OK, die Zahlen sind jetzt nicht sooo berauschend.

      Ihr dürft aber nicht vergessen - Arcam ist in einem Projektgeschäft. Es kann also von einem zum anderen Quartal wieder ganz anders ausschauen - etwa wenn die ein oder andere volume-order reinkommt....
      2 Antworten
      Avatar
      schrieb am 21.04.16 18:35:04
      Beitrag Nr. 1.087 ()
      Antwort auf Beitrag Nr.: 52.244.620 von derbiologe am 21.04.16 13:39:53welche wirkung so ein posting doch entfalten kann. :laugh::laugh:

      der kurs hat sich wieder deutlich erholt...
      Avatar
      schrieb am 21.04.16 19:38:50
      Beitrag Nr. 1.088 ()
      Weiß jemand, wo man den CC einsehen kann, der heute um 14 Uhr statt fand?
      Avatar
      schrieb am 21.04.16 23:08:53
      Beitrag Nr. 1.089 ()
      Antwort auf Beitrag Nr.: 52.244.620 von derbiologe am 21.04.16 13:39:53Guten Abend,

      ein Schippchen mehr hätte es sein dürfren. Bin aber sehr zufrieden!

      Beim nächstem Großauftrag gleicht sich das wieder aus.

      Wir sind immer noch in der Anfangsphase..:)



      Q1 Report 2016

      Arcam AB will publish the report for the period January 1 – March 31, 2016 on April 21 at 08.30 a.m. (CET).

      Following this report Arcam will arrange a conference call for media and analysts.
      CEO Magnus René and CFO Johan Brandt will present and comment on the report.
      After the presentation there will be time for questions.

      Conference call: April 21, 2016 at 02:00 p.m. (CEST)

      Phone numbers:

      SE: +46 8 566 426 90
      UK: +44 203 008 98 16
      US: +1855 831 59 47
      Link: Arcam Q1 report

      Make sure you are connected to the phone conference by calling in and register a few minutes before the conference begins.

      Welcome!

      For more information, please contact Anna Grahn, *protected email*, phone: +46 709 778 336.
      Avatar
      schrieb am 25.04.16 19:59:03
      Beitrag Nr. 1.090 ()
      Was wurde denn nun aus dem vollmundig angekündigtem Sit-in mit Alcoa?
      Gehts jetzt wieder monatelang seitwärts mit leichter Abwärts-Tendenz?
      Keine neuen Analystenstatements...die Aktie nervt!
      Avatar
      schrieb am 28.04.16 23:37:46
      Beitrag Nr. 1.091 ()
      Avatar
      schrieb am 30.04.16 11:30:09
      Beitrag Nr. 1.092 ()
      http://www.nasdaqomxnordic.com/shares/microsite?Instrument=S…

      Der Kurs eiert seit Monaten hin und her, bei der niedrigen MK müsste doch mal Schwung reinkommen....aber nein...
      Komplett-Tausch in SLM.
      Avatar
      schrieb am 07.05.16 12:44:16
      Beitrag Nr. 1.093 ()
      ARCAM ist wohl doch nicht so der Leader der Branche:
      http://www.focus.de/finanzen/news/wirtschaftsticker/hsbc-emp…

      "viermal schneller als die Konkurrenz"
      Der Kurs mittlerweile auch....
      1 Antwort
      Avatar
      schrieb am 09.05.16 18:11:12
      Beitrag Nr. 1.094 ()
      Published: 2016-05-09 13:30:00 CEST
      Arcam launches Qplus, significantly enhanced generation of the industry standard Q-series

      Arcam AB (publ), listed on the NASDAQ OMX Stockholm, today launches
      Arcam Q10plus and Arcam Q20plus, a significantly enhanced generation of the
      Arcam Q-series EBM systems for Additive Manufacturing. With Qplus Arcam
      introduces Arcam xQam™, an X-ray based function for high precision auto
      -calibration and improved beam control.
      The Arcam Qplus-series introduces important features facilitating efficient
      manufacturing;

      - Arcam xQam™ – an innovative X-ray based detection system for automatic
      calibration and improved beam control.

      - EBM Control 5.0 – an all new software platform adding functionality for
      more efficient and accurate beam control as well as new melt strategies,
      improving build speed and precision.

      - New electronics – bringing more efficient and accurate beam control.

      Arcam Qplus offers up to 25% higher productivity with significantly improved
      surface finish and precision.


      “With the Arcam Q series-plus we sharpen our offering to our main markets, the
      implant industry and the aerospace industry. With the introduction of the
      innovative Arcam xQam™ technology, Arcam reinforces its commitment being at the
      technological forefront within industrial Additive Manufacturing”, says Magnus
      René, CEO of Arcam.
      For further information:

      Magnus René, CEO and President, Arcam
      Cell: 46 702 79 89 99 or 1 781 266 6957
      E-mail: magnus.rene@arcam.com
      Arcam Group provides cost-efficient Additive Manufacturing solutions for
      production of metal components. Arcam’s Electron Beam Melting (EBM®) technology
      offers design freedom combined with excellent material properties and high
      productivity. Arcam is, through its solution orientation and comprehensive
      product offering, an innovative partner for advanced manufacturing, primarily
      for the aerospace and medical industries. Arcam offers EBM systems through Arcam
      AB in Sweden, powder metals through AP&C in Canada and implant contract
      manufacturing through DiSanto in the U.S.The company is listed on Nasdaq
      Stockholm and the Head Office is located in Mölndal, Sweden.

      ________________________________________________________________________________
      _
      _______

      Arcam AB • Krokslätts Fabriker 27A • SE-431 37 Mölndal, Sweden • 46-31-710 32 00
      • www.arcam.com

      Attachments:
      05095326.pdf
      Avatar
      schrieb am 09.05.16 20:49:31
      Beitrag Nr. 1.095 ()
      Antwort auf Beitrag Nr.: 52.360.197 von belliora am 07.05.16 12:44:16
      Zitat von belliora: ARCAM ist wohl doch nicht so der Leader der Branche:
      http://www.focus.de/finanzen/news/wirtschaftsticker/hsbc-emp…

      "viermal schneller als die Konkurrenz"
      Der Kurs mittlerweile auch....



      Nicht der Leader,, worauf bezogen?
      Auf die Produktionszahlen oder auf die Maschinenleistung??????????????

      Les den Artikel nochmal durch, und dann erweitere deine Aussage so, dass sie nicht missverstanden wird - oder nehm Nachhilfeunterricht in Deutschem Sprachverständnis - ja ich weiss, schwer, sehr schwer, aber nötig, um nicht ganz blöd dazustehen, auch in Zukunft.

      Da steht, dass SLM viermal schneller produziert - nicht dass deren Maschinen plötzlich viermal schneller Metallgegenstände produzieren(sintern) als die der Konkurrenz, das wäre mir nämlich neu.
      Ein himmelweiter Unterschied ist das.
      Avatar
      schrieb am 09.05.16 22:06:24
      Beitrag Nr. 1.096 ()
      "Da steht, dass SLM viermal schneller produziert - nicht dass deren Maschinen plötzlich viermal schneller Metallgegenstände produzieren(sintern)"

      Wer würde sich so blöde ausdrücken???
      Das ist doch wohl eindeutig!
      Avatar
      schrieb am 12.05.16 19:31:50
      Beitrag Nr. 1.097 ()
      Avatar
      schrieb am 13.05.16 16:49:29
      Beitrag Nr. 1.098 ()
      Arcam expands in Germany with new sales office
      Fri, May 13, 2016 08:45 CET

      Arcam AB, listed on NASDAQ Stockholm, and leading supplier of Additive Manufacturing technology, is expanding in Germany with a new sales operation led by Peter Jain and based in Stuttgart.

      With long term relationships with significant clients such as Fruth Innovation Technology, Fraunhofer Institute and Implantcast, Germany is an important market for Arcam today with a great potential for the future. The new sales office in Stuttgart will support our activities in Germany, providing initially sales and liaison, and further on local support to the German customer base.

      ”We are happy about this important step in strengthening our presence on the important German market. Peter Jain has a solid background in the machine tool industry, thus bringing important knowledge and contacts to our team”, says Magnus René, CEO of Arcam.

      “I am enthusiastic about joining Arcam, being part of the team bringing state-of-the-art additive manufacturing solutions into production. I look forward to leading our German operations for continued growth”, says Peter Jain, Managing Director of Arcam Cad to Metal GmbH.

      For further information:

      Magnus René, CEO and President, Arcam
      Cell: 46 702 79 89 99 or 1 781 266 6957
      E-mail: magnus.rene@arcam.com

      Arcam Group provides cost-efficient Additive Manufacturing solutions for production of metal components. Arcam’s Electron Beam Melting (EBM® ) technology offers design freedom combined with excellent material properties and high productivity. Arcam is, through its solution orientation and comprehensive product offering, an innovative partner for advanced manufacturing, primarily for the aerospace and medical industries. Arcam offers EBM systems through Arcam AB in Sweden, powder metals through AP&C in Canada and implant contract manufacturing through DiSanto in the U.S. The company is listed on Nasdaq Stockholm and the Head Office is located in Mölndal, Sweden.

      ________________________________________________________________________________________

      Arcam AB • Krokslätts Fabriker 27A • SE-431 37 Mölndal, Sweden • 46-31-710 32 00 • www.arcam.com
      Avatar
      schrieb am 13.05.16 22:06:21
      Beitrag Nr. 1.099 ()
      Alles gute News, die sich nicht im Kurs niederschlagen.....
      1 Antwort
      Avatar
      schrieb am 13.05.16 23:13:36
      Beitrag Nr. 1.100 ()
      Antwort auf Beitrag Nr.: 52.405.992 von belliora am 13.05.16 22:06:21Ganz schnell alles verkaufen!
      Avatar
      schrieb am 16.05.16 11:37:56
      Beitrag Nr. 1.101 ()
      Avatar
      schrieb am 20.05.16 09:28:57
      Beitrag Nr. 1.102 ()
      Avatar
      schrieb am 23.05.16 12:30:05
      Beitrag Nr. 1.103 ()
      2 Antworten
      Avatar
      schrieb am 24.05.16 17:44:41
      Beitrag Nr. 1.104 ()
      Antwort auf Beitrag Nr.: 52.459.896 von belliora am 23.05.16 12:30:05Gutes Volumen, gestern und heute beim Knacken der 200.
      1 Antwort
      Avatar
      schrieb am 24.05.16 21:28:20
      Beitrag Nr. 1.105 ()
      Gaaanz knapp, ob das nachhaltig bleibt?
      Sektor in USA heute mal wieder durch die Decke...
      1 Antwort
      Avatar
      schrieb am 24.05.16 21:40:13
      Beitrag Nr. 1.106 ()
      Antwort auf Beitrag Nr.: 52.469.205 von belliora am 24.05.16 21:28:20Bleibt die Frage. Wird mindestens weiter heftige Schwankungen geben.
      Avatar
      schrieb am 25.05.16 17:20:29
      Beitrag Nr. 1.107 ()
      Antwort auf Beitrag Nr.: 52.467.987 von linkshaender am 24.05.16 17:44:41Auch heute wieder, sieht nach Ausbruch aus.

      Heute berichtete auch ein Schwedischer Börsensender über Arcam.
      Avatar
      schrieb am 25.05.16 19:42:30
      Beitrag Nr. 1.108 ()
      Heimlich still und leise, noch ohne Mastertrader-Pusher-Angriff :-)
      2 Antworten
      Avatar
      schrieb am 25.05.16 19:51:03
      Beitrag Nr. 1.109 ()
      Antwort auf Beitrag Nr.: 52.477.042 von belliora am 25.05.16 19:42:30Der Sektor in USA heute sehr moderat. Könnte also eine Aufholaktion wegen gestern sein.
      1 Antwort
      Avatar
      schrieb am 25.05.16 20:57:46
      Beitrag Nr. 1.110 ()
      Antwort auf Beitrag Nr.: 52.477.129 von linkshaender am 25.05.16 19:51:03rein charttechnisch ist der weg jetzt frei bis ca. 240 SEK:

      Avatar
      schrieb am 30.05.16 18:13:06
      Beitrag Nr. 1.111 ()
      Avatar
      schrieb am 01.06.16 12:45:07
      Beitrag Nr. 1.112 ()
      Ob hier auch die "gelbe Gefahr" droht?
      1 Antwort
      Avatar
      schrieb am 01.06.16 12:57:03
      Beitrag Nr. 1.113 ()
      Antwort auf Beitrag Nr.: 52.517.066 von belliora am 01.06.16 12:45:07Wenn damit die Chinesen gemeint sein sollen, gäbe es da einen sehr interessanten Aspekt. Die aktuellen Übernahmen seitens China (Kuka, Aixtron, SGL?) betreffen eher bereits etablierte (Produktions-)Prozesse und dort direkt umfangreich anwendbar. Ein Interesse an Arcam wäre da schon viel strategischer angelegt als die bisherigen, da 3D sich noch in einer dynamischen Entwicklung befindet. Mit Sicherheit ein spannendes Szenario. Könnte mir da schon eher Alternativangebote vorstellen.
      Avatar
      schrieb am 01.06.16 22:24:07
      Beitrag Nr. 1.114 ()
      Avatar
      schrieb am 18.06.16 11:43:33
      Beitrag Nr. 1.115 ()
      Kursausbruch heftigst misslungen, 20% vom Lokalhoch abgegeben....nicht gut!
      1 Antwort
      Avatar
      schrieb am 18.06.16 23:13:42
      Beitrag Nr. 1.116 ()
      Avatar
      schrieb am 21.06.16 21:08:53
      Beitrag Nr. 1.117 ()
      Antwort auf Beitrag Nr.: 52.644.509 von belliora am 18.06.16 11:43:33Ja, ist wohl leider so. Das Ausbruchslevel bei 200 hätte halten müssen. Jetzt sind wir wieder im alten Seitwärtstrend gefangen. Oder doch ein leichter Aufwärtskanal?
      Avatar
      schrieb am 21.06.16 22:14:45
      Beitrag Nr. 1.118 ()
      Mich ärgert, dass ich dem Ausbruch "getraut" hatte und keinen Stop gesetzt habe, werde mal paar Amiwerte einsammeln, die laufen erheblich besser, oder SLM (überhaupt die beste 3D Aktie)
      Schon seltsam die Schwäche in Schweden.
      2 Antworten
      Avatar
      schrieb am 22.06.16 15:50:16
      Beitrag Nr. 1.119 ()
      Antwort auf Beitrag Nr.: 52.666.313 von belliora am 21.06.16 22:14:45Sieht heute aber schon mächtig nach einer Bärenfalle aus.
      1 Antwort
      Avatar
      schrieb am 22.06.16 17:18:28
      Beitrag Nr. 1.120 ()
      Antwort auf Beitrag Nr.: 52.671.110 von linkshaender am 22.06.16 15:50:16jetzt hat hoffentlich das gejammer hier mal ein ende.
      wer sich nach dem grund des kurssprunges gefragt hat: nordea covert seit neuestem den wert und hat ein kursziel von 271 SEK ausgegeben. es ist also noch luft nach oben :kiss:

      Avatar
      schrieb am 22.06.16 18:29:46
      Beitrag Nr. 1.121 ()
      So ein Covering, was auch Gehör bei den Anlegern findet, hat bisher eindeutig gefehlt, wahrscheinlich mussten erst noch ein paar Große rein...
      Avatar
      schrieb am 04.07.16 22:27:05
      Beitrag Nr. 1.122 ()
      New facility for Selective Electron Beam Melting

      http://3dprintingindustry.com/news/new-facility-selective-el…
      Avatar
      schrieb am 12.07.16 12:47:15
      Beitrag Nr. 1.123 ()
      Arcam subsidiary AP&C secures financing for new powder manufacturing plant


      Arcam AB, listed on NASDAQ Stockholm, and a leading supplier of Additive Manufacturing (“AM”) equipment, announces that its powder manufacturing subsidiary AP&C in Montreal, Canada, has agreed with Investissement Québec (IQ) on a financing arrangement where IQ supports AP&C investment in a new powder plant with interest free loans and grants.

      The investment in a new facility was announced in May 2016. The investment is totally up to 31 MCAD and IQ will supply interest free loans up to 10 MCAD and grants up to 1.5 MCAD. The expansion of AP&C follows on significant growth in 2015 and 2016 and a surge in demand for AP&C’s high quality titanium powders for additive manufacturing.

      “The support from Investissement Québec and Montreal International is important for our ability to expand quickly to address the increased demand for high end titanium powder. Arcam is determined to serve the fast growing Additive Manufacturing industry through cost efficient solutions thus converting traditional manufacturing into Additive Manufacturing. A requisite is to offer highest quality metal powder for production at competitive cost”, says Magnus René, CEO of Arcam.

      “Montréal International, Greater Montréal’s economic development agency, provided strategic support that has been key in making our expansion project possible. With this investment we can provide our existing and future clients with superior quality materials to meet the high manufacturing standards of the aerospace and biomedical industries. The new powder production facility and advances in atomization facility and advances in atomization technology, will significantly increase our production capacity in 2017 and beyond,” says Alain Dupont, President of AP&C.
      Avatar
      schrieb am 15.07.16 19:43:51
      Beitrag Nr. 1.124 ()
      Trotz der ganzen Nachrichten kurstechnisch völlig enttäuschend, ist wohl immer noch maßlos überbewertet?
      Avatar
      schrieb am 21.07.16 08:53:31
      Beitrag Nr. 1.125 ()
      Published: 2016-07-21 08:30:00 CEST
      Interim report January – June 2016

      Significant investments in technology and capacity
      Significant investments in technology and capacity

      · Net sales increased by 17 % to 307.6 (262.0) MSEK
      · Operating income amounted to 4.1 (23.5) MSEK
      · Net income amounted to 9.8 (16.7) MSEK
      · Earnings per share amounted to 0.47 (0.82) SEK
      · 28 (23) systems were delivered in the period
      · Order intake amounted to 15 (17) EBM systems

      For the second quarter:

      · Net sales amounted to 147.7 (150.6) MSEK
      · Operating income amounted to -4.8 (19.7) MSEK
      · Net income amounted to 1.5 (12.4) MSEK
      · 14 (14) EBM systems were delivered in the second quarter
      · Order intake amounted to 9 (7) systems

      Significant investments in technology and capacity

      The Arcam Group continues to grow and during the first six months the increase
      in sales was 17%. Sales for the period increased to 307.6 (262.0) MSEK and
      trailing twelve month sales amounts to 621.7 (490.0) MSEK. Operating income for
      the period was 4.1 (23.5) MSEK and trailing twelve month operating income
      amounts to 30.7 (49.0) MSEK.

      In the first 6 months we increased our delivery pace and we delivered 28 (23)
      EBM systems. The last twelve months we thus delivered 56 systems. Our metal
      powder manufacturer AP&C more than doubled its order intake compared to the same
      period 2015. In May we decided to add significant capacity by building a new
      powder manufacturing plant in Montreal.

      We continue to pursue and develop our long-term strategy to industrialize the
      EBM technology and simultaneously developing the metal powder manufacturing and
      contract manufacturing business. We invest significantly in technology,
      marketing and manufacturing capacity to meet our customers’ demands and growing
      expectations on productivity and reliability.

      Business status

      During the second quarter we delivered 14 EBM systems and the majority went to
      customers in the implant or the aerospace industry. The demand for EBM systems
      is driven by how quickly our customers in the aerospace and implant industry are
      moving towards production, a process that is dependent on both technical and
      commercial factors. In the period we received 9 new orders and the order book by
      the end of the quarter amounts to 14 systems. One of our new clients is the US
      based implant manufacturer Exactech. They produce EBM implants via a contract
      manufacturer since 2010 and they have decided to build its own manufacturing
      operation and placed an order of 2 EBM systems.

      During the quarter Arcam Q10plus and Arcam Q20plus were launched. The new
      systems are a significantly enhanced generation of the Arcam Q-series EBM
      systems for Additive Manufacturing. Arcam Qplus offers up to 25% higher
      productivity with significantly improved surface finish and precision. With
      Qplus Arcam also introduces Arcam xQam™, an X-ray based function for high
      precision auto-calibration and improved beam control.

      To meet the growing demand for AP&C’s high quality titanium powder for Additive
      Manufacturing, we continue to add significant capacity by building a new powder
      manufacturing plant. During the second quarter a new powder reactor was taken
      into account. Thus AP&C now has 6 reactors in operation, and we plan to have 8
      reactors operating in our present plant Montreal by the end of this year. In May
      we also decided to increase further the capacity by building a new powder
      manufacturing plant outside Montreal, Canada. The investment is initially for 23
      MCAD and we have through an agreement with Investissement Quebec received a
      total of 11.5 MCAD in loans and grants, of which 10 MCAD in interest-free loans
      and 1.5 MCAD in grants. The new facility will provide manufacturing redundancy,
      short term capacity increase and long term expansion capability. The new
      capacity increase follows on significant growth in 2015 and 2016 and a surge in
      demand for AP&C’s high quality titanium powders for additive manufacturing. With
      the present build-out AP&C will reach a capacity of at least 750 tons per year.
      The new plant will be built in modules and can in the long run be extended so
      that we reach a combined total capacity of over 1,200 tons per year in both
      production plants.

      Since February our contract manufacturer DiSanto has a new management. The
      business continues to be burdened by weak sales for implants made with
      traditional technology. In the period several new customer projects for EBM
      manufactured implants have been added. Revenues from this part of the business
      is increasing but is still not compensating for the weak sales within
      traditionally manufactured implants. Hence, we have in the period written down
      the parent company holding in DiSanto with 28 MSEK. This has no effect on the
      consolidated numbers for the group.

      Strengthened organization

      During the first half of the year, we strengthened our sales and support
      organization in Germany, Italy and in the USA with new sales people in the field
      and a strengthened sales management.

      A new sales office in Stuttgart will initially drive sales in Germany and in the
      future also serve as a local support office. The operation is led by Peter Jain,
      who has a solid background in the machine tool industry.

      On the important Italian market, we have strengthened the organization with
      local management where our former agent Fausto Asvisio now works full time for
      us. The office in Turin is responsible for sales and service and is working
      close to our important customers in Italy.

      With 14 machines in order, a stable aftermarket and a fast growing market for AM
      metal powders we are well positioned for a positive development in 2016.

      Mölndal, July 21, 2016

      Magnus René, President and CEO

      This report contains information that Arcam AB is obliged to make public
      pursuant to the EU Market Abuse Regulation. The information was submitted for
      publication at 08.30 CEST on July 21, 2016.

      Telephone conference with CEO Magnus René and CFO Johan Brandt

      July 21, 2016 at 2.00 p.m. (CEST)

      Phone number to the conference:

      SE: +46 8 566 426 90
      UK: +44 203 008 98 19
      US: +1 855 753 22 35

      Link to presentation:

      Arcam Q2 conference
      call (http://event.onlineseminarsolutions.com/r.htm?e=1210170&s=1&…
      D
      6FFC37F8577CB44D4D3)
      For further information:

      Magnus René, CEO and President, Arcam
      Cell: 46 702 79 89 99 or 1 781 266 6957
      E-mail: magnus.rene@arcam.com
      Arcam Group provides cost-efficient Additive Manufacturing solutions for
      production of metal components. Arcam’s Electron Beam Melting (EBM®) technology
      offers design freedom combined with excellent material properties and high
      productivity. Arcam is, through its solution orientation and comprehensive
      product offering, an innovative partner for advanced manufacturing, primarily
      for the aerospace and medical industries. Arcam offers EBM systems through Arcam
      AB in Sweden, powder metals through AP&C in Canada and implant contract
      manufacturing through DiSanto in the U.S.The company is listed on Nasdaq
      Stockholm and the Head Office is located in Mölndal, Sweden.

      _______________________________________________________________________________
      _
      ________

      Arcam AB • Krokslätts Fabriker 27A • SE-431 37 Mölndal, Sweden • 46-31-710 32 00
      • www.arcam.com

      Attachments:
      07219966.pdf
      Avatar
      schrieb am 21.07.16 13:51:02
      Beitrag Nr. 1.126 ()
      Jedes mal dasselbe desaster nach den zahlen, lief ja auch die letzten tage ganz schwach, da wussten wieder einige mehr........
      Avatar
      schrieb am 21.07.16 13:57:47
      Beitrag Nr. 1.127 ()
      Wie ich sehe, liegts an Disanto....
      Avatar
      schrieb am 21.07.16 13:58:53
      Beitrag Nr. 1.128 ()
      Avatar
      schrieb am 23.07.16 16:45:50
      Beitrag Nr. 1.129 ()
      Habe den Schrott entsorgt, Wachstumswert? Lachhaft nach DEN Zahlen....da gibt es weitaus Besseres!
      Avatar
      schrieb am 23.07.16 16:47:20
      Beitrag Nr. 1.130 ()
      Der Chart ist jetzt auch vollends im A.......
      1 Antwort
      Avatar
      schrieb am 23.07.16 19:20:54
      Beitrag Nr. 1.131 ()
      Antwort auf Beitrag Nr.: 52.899.541 von belliora am 23.07.16 16:47:20tja Bellilein hättest mir folgen sollen.
      Wie ich sagte, Arcam muss erst in seine Bewertung noch langsam reinwachsen.
      3DP Hype ist lange vorbei, jetzt zählen nur noch harte Fakten.

      LG S.
      Avatar
      schrieb am 01.08.16 11:47:41
      Beitrag Nr. 1.132 ()
      Was bei der Bude alles so an Gerüchten verbreitet wurde, um den Kurs zu pushen (Übernahme durch GE, Alcoa-Deal)...
      Wenn kein Geld verdient wird, nützt die ganze schöne Technologie nichts, zumal nicht mal feststeht, ob die sich letztlich am Markt durchsetzt.
      Kommt mir alles sehr intransparent vor hier.
      Avatar
      schrieb am 03.08.16 18:56:54
      Beitrag Nr. 1.133 ()
      In den USA knallen die Konkurrenten mal wieder alle zusammen hoch, das ist der Unterschied zu der unbekannten Schwedenbude...
      1 Antwort
      Avatar
      schrieb am 04.08.16 12:13:50
      Beitrag Nr. 1.134 ()
      Antwort auf Beitrag Nr.: 52.983.397 von belliora am 03.08.16 18:56:54 Habe den Schrott entsorgt, Wachstumswert? Lachhaft nach DEN Zahlen....da gibt es weitaus Besseres!
      da frage ich mich was du hier noch suchst belästige andere mit dem Geschwafel Belliora
      Avatar
      schrieb am 04.08.16 14:54:56
      Beitrag Nr. 1.135 ()
      Musst du dein Dritt-Profil nutzen? 86 Beiträge in über 10 Jahren......ts ts ...
      Avatar
      schrieb am 08.08.16 19:15:39
      Beitrag Nr. 1.136 ()
      Silicon Nitride Biomaterial Gets 3D Print Treatment for the First Time Ever
      stell das mal hier rein, das könnte Titanium Implantaten ggfs. den Rang ablaufen:

      aus 3D Printing Industry:

      When discussing different applicable materials for biocompatible implants, even in light of emerging 3D printing technologies, doctors and their patients are generally restricted to using PEEK (thermoplastic polymer) or titanium materials. But one company out of Salt Lake City, Utah, called Amedica Corporation, has been focused on developing medical-grade silicon nitride, a biomaterial that is ‘osteopromotive’, anti-infective, and could even result in faster fusion than other material alternatives. Silicon nitride has been proven to be the optimal implant material for spinal and orthopedic-based operations, but up until now, could only be manufactured with traditional methods. Now, it seems that the Amedica’s R&D team has come a long way with their work, as they’ve just announced that, for the first time ever, their silicon nitride biomaterial can now be fabricated with 3D printing technology.
      The Amedica team has used the unique process of robotic deposition (aka robocasting), an ink-based extrusion method, to created 3D structures from the silicon nitride. To confirm the integrity and validity of the material characteristics, the Amedica team examined the final printed products using scanning electron microscopy, which ultimately proved that the 3D printable silicon nitride matched both the theoretical density and microstructure attributes of traditionally manufactured silicon nitride fusion devices.
      “This innovation speaks to the unique art and science related to our manufacturing strength,” said Dr. Sonny Bal, the Chairman and CEO of Amedica Corportation. “3D printing of a complex ceramic material opens future doors, especially in terms of cost advantages, and addressing a variety of OEM partner needs. Custom additive manufacturing is a modern advancement, and we are proud to lead the way in 3D printing of our silicon nitride formulation, with its advantages in bone fusion, antibacterial behavior, and superior strength.”

      Robocasting is the ideal 3D printing process for working with this silicon nitride ceramic biomaterial, as there is no binding involved and production for devices can be completed within 24 hours time. With this newly developed method of manufacturing silicon nitride devices, Amedica can now move towards producing anatomically accurate implants and custom fabrication of bone scaffolds. The next step for Amedica is to commercialize their 3D printable silicon nitride biomaterial, which could someday replace titanium and PEEK material as the optimal choice for patient-specific implants.

      http://3dprintingindustry.com/news/silicon-nitride-biomateri…

      S.
      Avatar
      schrieb am 11.08.16 22:06:14
      Beitrag Nr. 1.137 ()
      Von allen 3D-Werten läuft die Bude hier am schlechtesten, war nicht verkehrt, verkauft zu haben.
      Deren Standart wird sich wohl doch nicht durchsetzen, SLM ist ja sagenhaft unterwegs, Freu dich, Schaeffi!
      4 Antworten
      Avatar
      schrieb am 12.08.16 19:50:13
      Beitrag Nr. 1.138 ()
      Antwort auf Beitrag Nr.: 53.043.586 von belliora am 11.08.16 22:06:14
      Zitat von belliora: Von allen 3D-Werten läuft die Bude hier am schlechtesten, war nicht verkehrt, verkauft zu haben.
      Deren Standart wird sich wohl doch nicht durchsetzen, SLM ist ja sagenhaft unterwegs, Freu dich, Schaeffi!


      ich freu mich nur, dass ich den richtigen Riecher hatte,
      aber nicht für die noch Investierten im Minus Bereich, um das hier mal klar zu stellen.

      Ich hatte Arcam zu letzt ja nur noch zum Traden genutzt, dazu sind sie nach wie vor gut.
      Hatte einfach das Gefühl der 3DP Hype geht zu Ende und die Spreu trennt sich vom Weizen,
      bzw. die müssen erst noch in die teilweise utopischen Bewertung rein wachsen.

      Soll aber nicht heißen, dass die nicht alle die nächsten Jahre wieder langsam steigen, wenn die
      Normalität zurückkehrt

      hatte mal DDD, SSYS, XONE, GGG, ARCAM, alles schon lange verkauft, nur noch eine ist geblieben,
      nämlich ONVO, ist aber auch ne etwas andere (bessere n.m.M.) Kategorie.

      Gruss S.
      Avatar
      schrieb am 24.08.16 19:57:29
      Beitrag Nr. 1.139 ()
      Hier wird die Schäfchenwiese abgegrast: steigende Kurse vortäuschen und gleich abverkaufen...US-Werte werden vorgezogen. Nach wie vor KEIN Kauf!
      Avatar
      schrieb am 25.08.16 19:07:28
      Beitrag Nr. 1.140 ()
      Antwort auf Beitrag Nr.: 53.043.586 von belliora am 11.08.16 22:06:14
      Zitat von belliora: Von allen 3D-Werten läuft die Bude hier am schlechtesten, war nicht verkehrt, verkauft zu haben.
      Deren Standart wird sich wohl doch nicht durchsetzen, SLM ist ja sagenhaft unterwegs, Freu dich, Schaeffi!


      Hast wohl recht. Heute wieder mal nur 5,6% nach oben.
      Avatar
      schrieb am 01.09.16 22:37:44
      Beitrag Nr. 1.141 ()
      hahaha, Eintagsfliege...
      Anlocken und Schäfchenwiese abgrasen nennt man sowas im Börsenjargon.
      Die Aktie wird weiter fallen........
      3 Antworten
      Avatar
      schrieb am 04.09.16 12:14:45
      Beitrag Nr. 1.142 ()
      Antwort auf Beitrag Nr.: 53.188.203 von belliora am 01.09.16 22:37:44mal ein paar aktuelle kursziele:

      25.8.16 Pareto - 249 SEK
      25.8.16 SEB - 190 SEK
      22.7.16 Nordea - 265 SEK
      22.7.16 DNB Markets - 260 SEK
      12.7.16 Carnegie - 215 SEK

      aktueller kurs: 185,5 SEK

      @belliora: du hast hoffentlich verkauft???!!!
      2 Antworten
      Avatar
      schrieb am 04.09.16 12:59:08
      Beitrag Nr. 1.143 ()
      Kursziele kann ich auch raushauen: 600 SEK....
      (gab´s übrigens auch eins...)
      5 Antworten
      Avatar
      schrieb am 04.09.16 22:23:44
      Beitrag Nr. 1.144 ()
      ALso ich habe mehrfach aufgestockt.. wo ist das Problem?
      Avatar
      schrieb am 06.09.16 08:59:49
      Beitrag Nr. 1.145 ()
      Antwort auf Beitrag Nr.: 53.202.615 von derbiologe am 04.09.16 12:14:45
      geworden sind es 285 SEK
      .
      .
      Statement by the Board of Directors of Arcam in relation to the public offer by GE

      The Board of Directors of Arcam unanimously recommends that the shareholders of Arcam accept the offer made by GE

      Background

      This statement is made by the Board of Directors (the “Board”) of Arcam AB (publ) (“Arcam” or the “Company”) pursuant to Section II.19 of Nasdaq Stockholm’s Takeover Rules (the “Takeover Rules”).

      GE Sweden Holdings AB (“GE”), a Swedish company within the GE Aviation operating unit and an indirectly wholly-owned subsidiary of General Electric Company, has today announced a public cash offer to the shareholders of Arcam to tender all ordinary shares (the “Shares”) for a consideration consisting of SEK 285 in cash per Share (the “Offer”), which corresponds to a total Offer value of SEK 5,855,776,725[1].

      The Offer also includes a public offer to tender to GE all American depositary shares (each an “ADS”), each ADS representing the right to receive one Share. The ADS program is unsponsored and was set up without any involvement by Arcam. GE offers SEK 285 per ADS in cash.

      The Offer does not include any rights granted by Arcam to its employees under any incentive program implemented by Arcam. GE has stated that they intend to procure fair treatment in connection with the transaction for participants in such programs. Accordingly, the Offer does not include the preference shares of series C in Arcam held by Arcam as hedge for delivery under Arcam’s incentive program. In line herewith, the Swedish Securities Council has, in a ruling on August 29, 2016 (ruling 2016:23), confirmed that the preference shares of series C in Arcam may be excluded from the Offer.

      The Offer represents a premium of:

      53.23 per cent to the closing price of SEK 186.00 per Share on Nasdaq Stockholm on September 5, 2016, the last trading day prior to the announcement of the Offer,
      67.35 per cent to the volume weighted average price of SEK 170.30 per Share on Nasdaq Stockholm over the 30 trading days up to and including September 5, 2016.
      The acceptance period of the Offer is expected to commence on September 7, 2016 and expire on October 14, 2016. GE has reserved the right to extend the acceptance period and, to the extent necessary and permissible, will do so in order for the acceptance period to cover applicable decision-making procedures at relevant authorities.

      Completion of the Offer is conditional upon, amongst other things, GE becoming the owner of more than 90 percent of the total number of Shares in Arcam and the receipt of all necessary regulatory, governmental or similar clearances, approvals and decisions, including from competition authorities, in each case on terms which, in GE’s opinion, are acceptable. GE has reserved the right to waive these and other conditions for completion of the Offer.

      The Board has, at the written request of GE, permitted GE to carry out a confirmatory due diligence review of Arcam in connection with the preparation of the Offer. In connection with such due diligence, GE has not received any non-public price-sensitive information.

      Arcam has retained Carnegie Investment Bank AB (publ) (“Carnegie”) as financial adviser in relation to the Offer. Carnegie has supported the Board in its analysis, evaluation and assessment of the Offer. Arcam has retained Baker & McKenzie as legal adviser in relation to the Offer.

      The Board’s evaluation of the Offer

      The Board’s opinion of the Offer is based on an assessment of a number of factors that the Board has considered relevant in relation to the evaluation of the Offer. These factors include, but are not limited to, Arcam’s present position, the expected future development of the Company and thereto related possibilities and risks.

      In the Board’s opinion, Arcam has a well-defined and viable strategy going forward with its unique Electron Beam Machines production method and its proprietary Plasma Atomization powder manufacturing. The Company has made significant investments during the last years and has grown considerably, both within the aerospace as well as the orthopedic implant industries. Arcam operates on a global market with strong business and growth potential. Furthermore, the Board believes that the Company has a well-developed and strong intellectual property portfolio which is of crucial importance for a company highly dependent on its patents within the Additive Manufacturing industry.

      In terms of the Company’s long-term prospects, the Board believes that the demand for the Company’s technology for Additive Manufacturing of aerospace and orthopedic implant products and components will increase dramatically, meaning that the market has favorable long-term growth opportunities. As the market develops, more advanced technology is required, which benefits Arcam. Accordingly, the Board believes that the Company is very well positioned for the future.

      However, in assessing the merits of the Offer, the Board has also considered that the Company, on the whole, has limited resources and that the Company operates in a demanding and regulated environment with long lead times. Further, the market for Additive Manufacturing is still rather immature and may become subject to technological leaps that may require substantial investments for Arcam in delivering on its business plan. GE has stated that Arcam’s strategy and offering align to GE’s vision of building its own expertise and capabilities in Additive Manufacturing to serve customers in the global industrial community. Further, GE has adequate resources in implementing and taking advantage of Arcam’s growth and business opportunities and will provide know-how and expertise to further leverage Arcam’s technology and to forcefully go to market with Arcam’s products and services.

      In considering the Offer, the Board has also taken into account that the Offer has a premium in relation to recently traded prices.

      In arriving at its recommendation, the Board has analyzed the Offer using the methods normally used for evaluating bids for listed companies, including Arcam’s valuation in relation to comparable listed companies and comparable acquisitions, the stock market’s expectation of the development of Arcam’s profitability and share price, and the Board’s expectation of Arcam’s long-term value based on expected future cash flows. In doing so, the Board has concluded that the Offer is fair from a financial point of view.

      Under the Takeover Rules the Board is required, on the basis of GE’s statements in the Offer announcement, to provide its opinion of the effects the implementation of the Offer may have on Arcam, specifically employment, and its views on GE’s strategic plans for Arcam and the effects these may be expected to have on employment and the places where Arcam conducts its business. GE has in this respect stated:

      “GE intends to maintain Arcam’s current operations and locations. GE believes the locations of all of Arcam’s operations provide strong business, operating and engineering talent as well as government and community support. GE plans to retain and develop Arcam’s current and valuable management and employees. GE further desires to amplify the speed and energy of Arcam’s entrepreneurial culture with GE’s world-class engineering and operational capabilities. GE does not intend to make any material changes for Arcam’s employees, including their terms of employment and the locations of business.”

      The Board assumes that this description is accurate and has in relevant aspects no reason to take a different view. Consequently, the Board envisages that the Offer will not have any material impact on the employment of Arcam and the places where Arcam conducts its business.

      Based on the above, the Board believes that the Offers recognizes Arcam’s growth prospects, as well as the risks associated with those prospects. Accordingly, the Board unanimously recommends the Arcam shareholders to accept the Offer.

      ________________
      1 Antwort
      Avatar
      schrieb am 06.09.16 09:03:45
      Beitrag Nr. 1.146 ()
      Antwort auf Beitrag Nr.: 53.214.126 von R-BgO am 06.09.16 08:59:49Habe so einen Doppelschlag noch nicht erlebt:

      GE will Arcam und SLM kaufen!
      Avatar
      schrieb am 06.09.16 09:11:48
      Beitrag Nr. 1.147 ()
      Antwort auf Beitrag Nr.: 53.202.780 von belliora am 04.09.16 12:59:08zu spät @belliorchen...:laugh::laugh:
      4 Antworten
      Avatar
      schrieb am 06.09.16 10:17:04
      Beitrag Nr. 1.148 ()
      Antwort auf Beitrag Nr.: 53.214.270 von derbiologe am 06.09.16 09:11:48GUTEN Morgen:laugh:
      Avatar
      schrieb am 06.09.16 10:44:28
      Beitrag Nr. 1.149 ()
      Antwort auf Beitrag Nr.: 53.214.270 von derbiologe am 06.09.16 09:11:48Wäre jetzt eigentlich mal Zeit für einen GW an alle Investierten, oder Belliora?
      2 Antworten
      Avatar
      schrieb am 06.09.16 10:50:58
      Beitrag Nr. 1.150 ()
      Antwort auf Beitrag Nr.: 53.215.278 von linkshaender am 06.09.16 10:44:28Genau,

      bin aber seid genau 30 Min. nicht mehr investiert:D

      Danke an alle, die hier positiv mitgewirkt haben!!
      1 Antwort
      Avatar
      schrieb am 06.09.16 11:25:32
      Beitrag Nr. 1.151 ()
      Na endlich, habt ihr tatsächlich geglaubt, ich hätte verkauft?
      Mein -nach mehreren Nachkäufen-Mischkurs liegt bei 19 Euro, die Achterbahnfahrt der Gefühle hat sich dann doch gelohnt....
      Ich denke, man sollte das Angebot wohl annehmen, Heavytrade hat´s auch getan ;-))
      Avatar
      schrieb am 06.09.16 12:32:32
      Beitrag Nr. 1.152 ()
      Antwort auf Beitrag Nr.: 53.215.332 von Heavytrade am 06.09.16 10:50:58@heavy verkauft immer einen tick zu früh - das war schon bei viz so. ich lass mich lieber "übernehmen" und spar dabei die transaktionsgebühren.

      apropos: wer einen ersatz für arcam sucht, sollte sich mal tobii anschauen, ebenfalls ein vielversprechendes schwedisches startup. sind zwar auch schon recht gut gelaufen, aber gerade dabei, fuss im gaming-bereich zu fassen.

      infos dazu hier:

      http://www.tobii.com/
      Avatar
      schrieb am 06.09.16 12:52:54
      Beitrag Nr. 1.153 ()
      Habe jetzt wieder massig cash und bin dankbar für jeden Tipp.....
      3 Antworten
      Avatar
      schrieb am 06.09.16 13:24:14
      Beitrag Nr. 1.154 ()
      Antwort auf Beitrag Nr.: 53.216.247 von belliora am 06.09.16 12:52:54das ist nix für dich, @belliora, du hast viel zu schwache nerven!! :laugh::laugh:
      2 Antworten
      Avatar
      schrieb am 06.09.16 14:35:20
      Beitrag Nr. 1.155 ()
      Antwort auf Beitrag Nr.: 53.216.463 von derbiologe am 06.09.16 13:24:14Mag sein, aber trotzdem hatte ich mich im Griff (liegt wohl an meinem Job).....wohin jetzt mit dem Cash, Luxusfrage:D
      1 Antwort
      Avatar
      schrieb am 06.09.16 17:10:27
      Beitrag Nr. 1.156 ()
      So ne Scheisse, das Beste geht wieder über den scheiss Teich. Na hoffentlich wird GE IRGENDWANN MAL ZERPFLÜCKT: EOS ist da schlauer, kein Börsengang - keine scheiss Übernahme.
      Avatar
      schrieb am 06.09.16 17:13:27
      Beitrag Nr. 1.157 ()
      Antwort auf Beitrag Nr.: 53.217.009 von belliora am 06.09.16 14:35:20wieviel ist es denn @belliora? vielleicht kann ich dir ja helfen!! :laugh::laugh:
      Avatar
      schrieb am 06.09.16 17:23:29
      Beitrag Nr. 1.158 ()
      Antwort auf Beitrag Nr.: 53.043.586 von belliora am 11.08.16 22:06:14
      Zitat von belliora: Von allen 3D-Werten läuft die Bude hier am schlechtesten, war nicht verkehrt, verkauft zu haben.
      Deren Standart wird sich wohl doch nicht durchsetzen, SLM ist ja sagenhaft unterwegs, Freu dich, Schaeffi!


      Und zum Ende des Threads ein dreifaches :laugh::laugh::laugh: ... und Glückwunsch an Alle hier mit Ausnahme des obigen Verkäufers... ENDE UND AUS Aber ganz ehrlich? Eine übernommene SLM oder Arcam ist ganz schlecht für ein Langfristdepot und noch schlechter für den dt. Standort, und womit wird so ne K... finanziert? Mit Schulden und Gratiszetteln der Zentralbanken, verboten sollte so etwas werden. Jetzt gibts ja nur noch DDD?! :laugh:
      1 Antwort
      Avatar
      schrieb am 06.09.16 17:43:40
      Beitrag Nr. 1.159 ()
      Antwort auf Beitrag Nr.: 53.218.800 von H2OAllergiker am 06.09.16 17:23:29Auch wenn du es MIR nicht gönnst, ich hatte immerhin die Eier, die Aktie über 2 Jahre zu halten und bis auf 15 runter zu verbilligen.
      Zwischen deinen Zeilen klingt sowas wie starke Verärgerung durch, hast wohl nicht durchgehalten?!
      Avatar
      schrieb am 06.09.16 18:14:20
      Beitrag Nr. 1.160 ()
      @ belliora Mit deinem Cash kann ich dir die Dt. Bank ans Herz legen. Lt. Schwiegermutter d. neuen Pimcochef ist die Commerzbank auch viel zu billig... Ich ärgere mich mehr über GE als um den schnellen Gewinn, schon wieder Schlüsseltechnologie aus Europa und Deutschland weggestohlen, muss man einfach mal so sagen. Arcam hätte langfr 1000% gemacht, aber ohne GE, GE schafft doch nix mehr in dem Bereich. Mich beschleicht bei solchen Übernahmen immer der Verdacht, dass solche Firmen durch jahrzehntelange Infiltration intern nur an die Börse gebracht werden, um vom Ami übernommen zu werden. Fällt nur niemandem auf, weil Börse eben seit 400 Jahren normal ist, nicht normal ist, wenn solche Übernahmen durch Fremdfinanzierung gestemmt werden, nur abartig und versteckte Subvention. Nachtrag: Habe tatsächlich seit mehr als einem Jahr keine reinen 3D-Aktien mehr, ONVO war die letzte vor vielen Monaten, habe alle zugunsten von Silberminen aufgegeben, gell Schäffie? Das geht schneller nach oben ;)
      1 Antwort
      Avatar
      schrieb am 06.09.16 20:47:02
      Beitrag Nr. 1.161 ()
      Antwort auf Beitrag Nr.: 53.219.283 von H2OAllergiker am 06.09.16 18:14:20ja bin zufrieden mit den Silber Minen:D:D:D
      hätte gern noch ne Arcam gehabt, aber was solls man kann nicht alles wissen:laugh::laugh:

      Glückwunsch allen Investierten!!!
      aber mit etwas Wermutstropfen:laugh::laugh: weil Arcam jetzt von diesem US Kraken einverleibt wurde.
      DA bin ich bei Dir - z.B. Airbus wäre mir auch lieber gewesen als GE um die Technologie in EU zu halten.

      GE setzten wohl ziemlich stark auf diese Technologie in Zukunft, nachdem sie validiert haben.
      Sind ja bei EOS schon sehr sehr dick drinnen, dagegen ist Arcam u. SLM bis jetzt weit abgeschlagen gewesen.
      Aber wie du sagst EOS ist nicht AG, zum Glück.

      wenn bald nur noch Elektro Autos fahren und alles 3D gedruckt wird kann die EU
      einpacken, da haben die Amis die Nase vorne:keks:
      Bei Biotech sind wir auch nur ne ganz kleine Hausnummer.

      bin wie gesagt nur noch in ONVO in dem Bereich drinnen und sehe größtes Potenzial.

      S.
      Avatar
      schrieb am 07.09.16 09:08:52
      Beitrag Nr. 1.162 ()
      Moin,

      erstmal ein Glückwunsch an alle Investierten ;)

      Mein Einstands-Mischkurs liegt bei ca. 20€ somit bin ich sehr zufrieden. Da ich zum ersten Mal von einer Übernahme "betroffen" bin eine Frage: Wie läuft es nun? Bekomme ich nun Post vom Broker mit dem Kaufangebot? Muss ich selbst tätig werden? Der Kurs wird ja vermutlich nun nicht mehr unter die 285 SEK fallen (oder doch?).

      VG,
      Steve
      3 Antworten
      Avatar
      schrieb am 07.09.16 13:24:14
      Beitrag Nr. 1.163 ()
      Antwort auf Beitrag Nr.: 53.223.219 von stevejhh am 07.09.16 09:08:52So genau kann ich das auch nicht beantworten, da es sich bei Arcam um eine schwedische Firma handelt und somit die Übernahme auch nach schwedischem Recht erfolgt. Ich kann daher nur aus Annahmen analog zu DE treffen.

      Eine Differenz ist zunächst schon mal, dass die Zustimmungsperiode sofort (also heute) beginnt. In De würde ich auf ein offizielles Angebot warten:

      The acceptance period of the Offer is expected to commence on September 7, 2016 and expire on October 14, 2016. GE has reserved the right to extend the acceptance period and, to the extent necessary and permissible, will do so in order for the acceptance period to cover applicable decision-making procedures at relevant authorities.

      Du wirst aber dazu von der Bank angeschrieben. Dann geht es sicher auch um die Prüfung der Bedingungen:

      Completion of the Offer is conditional upon, amongst other things, GE becoming the owner of more than 90 percent of the total number of Shares in Arcam and the receipt of all necessary regulatory, governmental or similar clearances, approvals and decisions, including from competition authorities, in each case on terms which, in GE's opinion, are acceptable. GE has reserved the right to waive these and other conditions for completion of the Offer.

      Die 90% sind hier sicher eine sehr scharfe Bedingung. Daher gehe ich selbst davon aus, dass GE Arcam komplett beherrschen will, d.h. Squeeze-Out und Beherrschungsvertrag. Was dies kursmäßig zu bedeuten hat, muss die Zeit zeigen.

      Eine weitere Differenz zu DE könnte sein, dass es keine Zaunkönig-Regelung gibt, d.h. eine Nachfrist zum Annahmezeitraum.

      VG
      Linkshänder

      Quelle: http://www.finanznachrichten.de/nachrichten-2016-09/38499428…
      1 Antwort
      Avatar
      schrieb am 07.09.16 13:30:35
      Beitrag Nr. 1.164 ()
      Antwort auf Beitrag Nr.: 53.225.874 von linkshaender am 07.09.16 13:24:14
      Danke
      Top! Danke für die exzellente Antwort. D.h. ich werde erst mal die Füße hochlegen und mir angucken, wie es weitergeht..
      Avatar
      schrieb am 07.09.16 13:56:00
      Beitrag Nr. 1.165 ()
      Antwort auf Beitrag Nr.: 53.223.219 von stevejhh am 07.09.16 09:08:52zurücklehnen und abwarten: du bekommst bald post von deinem broker (kann ein paar wochen dauern), der dich informiert, dass es ein übernahmeangebot gibt und wissen will, ob du annimmst, also verkaufst.
      wenn du verkaufst und die übernahme geht reibungslos über die bühne wird dir das geld auf dein konto gebucht und die aktien ausgebucht. spesen wie bei einem börsenverkauf entfallen.

      mir ist erst vor kurzem ein anderes schwedisches unternehmen "abgekauft" worden (meda ab), da lief es genau so.

      grundsätzlich hat man jetzt mehrere möglichkeiten:

      1. zurücklehnen und abwarten. dabei gibt es ein (mm sehr geringfügiges risiko), dass die übernahme platzt und der kurs wieder absäuft. positiv: keine verkaufsspesen

      2. jetzt verkaufen: damit geht man auf nummer sicher, außerdem liegt der kurs gerade deutlich über dem übernahmepreis (heute in der spitze 294 SEK).

      3. nicht verkaufen, weder direkt noch über börse, in der hoffnung, ein höheres angebot rauszuschlagen. dafür braucht man aber einen langen atem (kann schon einmal mehrere jahre dauern).

      ich habe mich für die 1. alternative entschieden, zumal es gerüchte gibt, dass siemens in einen bieterwettbwerb mit GE einsteigen könnte...
      Avatar
      schrieb am 07.09.16 16:38:28
      Beitrag Nr. 1.166 ()
      Im SLM Thread hat User Honeymoon etwas sehr interessantes und Hoffnungerweckendes geschrieben. Es wird nicht bei diesem Übernahmepreis bleiben, daher auf keinen Fall verkaufen, Konkurrenzangebote abwarten und dann entscheiden. Sollte GE SLM und Arcam übernehmen, wären sie augenblicklich Marktführer in mehreren Bereichen, und das würde Siemens, Airbus und Co nicht zulassen, wenn sie denn noch ein wenig g´scheit sind... Für Technologieführer ist kaum ein Preis zu hoch. Vertrag hin oder her, evtl wäre sogar eine Kartellklage der EU möglich, EOS und Concept Laser sind noch die einzigen, die Metall vernünftig schmelzen können.
      1 Antwort
      Avatar
      schrieb am 08.09.16 11:30:57
      Beitrag Nr. 1.167 ()
      Antwort auf Beitrag Nr.: 53.227.878 von H2OAllergiker am 07.09.16 16:38:28Ich hatte ja schon im SLM-Thread den Überlegungen von Honeymoon ausdrücklich zugestimmt. Ich gehe in meinen Überlegungen davon aus, dass keines der beiden Angebote zu den genannten Bedingungen über die Bühne geht. Gründe: Die genannten Argumente (bestätigt durch die DB-Analyse) sowie die hohen Volumina oberhalb der Offerte. Von daher ergeben sich natürlich sehr spannende Wochen für die beteiligten Aktionäre.
      Avatar
      schrieb am 06.10.16 08:47:15
      Beitrag Nr. 1.168 ()
      Die Konkurrenzangebote bleiben anscheinend aus... Kann man irgendwo einsehen, wie der Stand der Übernahme ist oder geben die Broker darüber keine Auskunft?
      6 Antworten
      Avatar
      schrieb am 11.10.16 10:46:40
      Beitrag Nr. 1.169 ()
      Antwort auf Beitrag Nr.: 53.418.453 von stevejhh am 06.10.16 08:47:15Ich habe da auch nichts gefunden. Ist leider nicht so transparent wie in DE. Da die AFX-Meldung bei den Terminen auch eine breite Spielwiese eröffnet, werden wir uns wohl noch gedulden müssen.

      http://www.finanznachrichten.de/nachrichten-2016-10/38806341…
      5 Antworten
      Avatar
      schrieb am 11.10.16 16:36:21
      Beitrag Nr. 1.170 ()
      Antwort auf Beitrag Nr.: 53.450.580 von linkshaender am 11.10.16 10:46:40alle schon verkauft?

      ich werde halten. angeblich hält elliot bereits mehr als 10 prozent, wodurch ein squeeze-out für GE nicht mehr möglich ist.

      Quelle leider nur in schwedisch:

      http://www.redeye.se/aktieguiden/nyheter/arcam-elliot-capita…

      meine prognose: GE gibt sich vorerst mit weniger zufrieden und erhöht in einem halben jahr das angebot für die verbliebenen aktionäre. ich rechne damit, dass sie dann mindestens 10 prozent drauflegen müssen, um elliot zu überzeugen...
      4 Antworten
      Avatar
      schrieb am 11.10.16 17:51:24
      Beitrag Nr. 1.171 ()
      Antwort auf Beitrag Nr.: 53.453.520 von derbiologe am 11.10.16 16:36:21Ich bin mir allerdings nicht sicher, ob der Rest der Aktionäre von der Singerschen Strategie profitieren wird. Im Fall IFS und EQT war es da wohl eine private Vereinbarung. Ähnliches liest man zu Celesio.
      1 Antwort
      Avatar
      schrieb am 11.10.16 18:07:23
      Beitrag Nr. 1.172 ()
      Antwort auf Beitrag Nr.: 53.454.270 von linkshaender am 11.10.16 17:51:24das ist egal. bei der übernahme von augusta war singer auch drin und als es - 2 jahre nach der übernahme - zur einigung mit dem übernehmer kam, ist der börsenkurs genau auf diese marke hochgesprungen (damals ca. 11 prozent über dem übernahmeangebot)
      Avatar
      schrieb am 13.10.16 16:20:43
      Beitrag Nr. 1.173 ()
      Antwort auf Beitrag Nr.: 53.453.520 von derbiologe am 11.10.16 16:36:21
      "dass sie dann mindestens 10 prozent drauflegen müssen"
      Die erwirtschafte ich mit einem anderen Investment innert eines halben Jahres (es sei denn Markt stürzt total ab), allemal...
      1 Antwort
      Avatar
      schrieb am 13.10.16 16:24:39
      Beitrag Nr. 1.174 ()
      1 Antwort
      Avatar
      schrieb am 13.10.16 17:54:21
      Beitrag Nr. 1.175 ()
      Antwort auf Beitrag Nr.: 53.471.538 von belliora am 13.10.16 16:20:43haha, ja, davon bin ich überzeugt! :laugh::laugh:

      damit wir das kontrollieren können bitte um genauere angaben zum investment. :rolleyes:
      Avatar
      schrieb am 13.10.16 17:55:43
      Beitrag Nr. 1.176 ()
      Antwort auf Beitrag Nr.: 53.471.580 von belliora am 13.10.16 16:24:39olle kamelle...
      Avatar
      schrieb am 17.10.16 16:43:24
      Beitrag Nr. 1.177 ()
      Da ist wohl eine Nachbesserung fällig...


      ARCAM: Bieterin GE hat 15,9% des Kapitals und der Stimmen

      Direkt-SE 2016.10.14 09.51

      STOCKHOLM (Dow Jones) General Electric, dessen Angebot von 285 Kronen je Aktie für alle Aktien von Arcam am Freitag, 14. Oktober, endet, hat bis zu diesem Datum 3.300.000 Aktien eingesammelt, das entspricht 15,9 Prozent der Aktien und Stimmrechte im Unternehmen.
      4 Antworten
      Avatar
      schrieb am 18.10.16 07:36:42
      Beitrag Nr. 1.178 ()
      Arcam subsidiary AP&C breaks ground on second plant


      Arcam AB, listed on NASDAQ Stockholm, and a leading supplier of Additive Manufacturing (“AM”) equipment, announces that its powder manufacturing subsidiary AP&C in Montreal, Canada, has begun to build its second powder plant in Saint-Eustache, Québec.


      Alain Dupont, President of Advanced Powders & Coatings (AP&C), led the ground-breaking ceremony. In attendance to the ceremony were Ministers responsible and representatives from municipals and industry. AP&C, specializing in plasma atomized metal powders for Additive Manufacturing, plans to invest up to CAD 31 million in this second powder facility. AP&C will also create 106 new jobs, in addition to the 85 people currently employed, within the next three years.

      “The need for high end titanium powder is driven by the fast growth and adoption of Additive Manufacturing. Arcam is determined to serve the industry through cost efficient solutions thus converting traditional manufacturing into Additive Manufacturing.

      A requisite is to offer highest quality powder for production at competitive cost”,
      says Magnus René, CEO of Arcam.

      “This investment makes possible to provide our existing and future clients with superior quality powders to meet the high manufacturing standards of the aerospace and orthopaedic industries,” says Alain Dupont, President of AP&C. “With this new powder production facility and advances in atomization technology, AP&C will significantly increase capacity”

      AP&C benefited from the support, advice and financial assistance of Canada Economic Development, Montréal International, Investissement Québec and the Québec Ministry of Economy, Science and Innovation in moving its expansion project forward.

      “Without the involvement from both the federal and provincial governments, our project would have been difficult to carry through at this speed”, Alain Dupont concludes. “Our points of contact were receptive to our needs, and showed keen knowledge of the issues and challenges facing our industry.”
      Avatar
      schrieb am 18.10.16 10:52:59
      Beitrag Nr. 1.179 ()
      UPDATE

      GE hält jetzt rund 40 prozent und verlängert angebotsfrist bis 1. november. wenn die arcam wirklich wollen, kommen sie über eine erhöhung des angebotes wohl nicht herum.

      http://www.reuters.com/article/idUSASN000346?type=companyNew…
      Avatar
      schrieb am 26.10.16 18:49:01
      Beitrag Nr. 1.180 ()
      So, bei SLM rummst es gerade, GE lässt sich wohl doch nicht von Heuschrecken auf der Nase herumtanzen, Übernahme dort geplatzt!
      Avatar
      schrieb am 30.10.16 11:34:08
      Beitrag Nr. 1.181 ()
      Antwort auf Beitrag Nr.: 53.493.102 von derbiologe am 17.10.16 16:43:24
      Zitat von derbiologe: Da ist wohl eine Nachbesserung fällig...


      ARCAM: Bieterin GE hat 15,9% des Kapitals und der Stimmen

      Direkt-SE 2016.10.14 09.51

      STOCKHOLM (Dow Jones) General Electric, dessen Angebot von 285 Kronen je Aktie für alle Aktien von Arcam am Freitag, 14. Oktober, endet, hat bis zu diesem Datum 3.300.000 Aktien eingesammelt, das entspricht 15,9 Prozent der Aktien und Stimmrechte im Unternehmen.


      na, wer sagt's denn: erhöhung auf 300 NOK per ansage :lick::lick:

      und das @belliora hat wieder mal aufs falsche pferd gesetzt...:laugh::laugh:
      3 Antworten
      Avatar
      schrieb am 30.10.16 14:08:48
      Beitrag Nr. 1.182 ()
      Antwort auf Beitrag Nr.: 53.583.243 von derbiologe am 30.10.16 11:34:08Wie bitte???
      Ich habe meine ARCAM zu 30 Euro verkauft, ansonsten verdiene ich meine Kohle mit Antiquitäten:p
      Lachen kannste über andere;)
      2 Antworten
      Avatar
      schrieb am 30.10.16 14:18:34
      Beitrag Nr. 1.183 ()
      Antwort auf Beitrag Nr.: 53.583.753 von belliora am 30.10.16 14:08:48Ja, ja, die Pleiten, Pech und Pannen-Mentalität findet man nicht nur im TV.

      Hier sollte man sich aber vergegenwärtigen, dass der Fall ebenso kontra Arcam hätte ausgehen können. Möglicherweise ist das Ergebnis aber auch nur den strenge(re)n deutschen "Schutz"-Verordnungen zuzuschreiben.
      1 Antwort
      Avatar
      schrieb am 01.11.16 12:41:35
      Beitrag Nr. 1.184 ()
      Antwort auf Beitrag Nr.: 53.583.789 von linkshaender am 30.10.16 14:18:34@linkshaender, das @belliora hat sich das bisschen schadenfreude hart erarbeitet, dafür brauchst du nur ein wenig zurückblättern...

      p.s. ich glaub ihm kein einziges wort, das es hier geschrieben hat :laugh::laugh:
      Avatar
      schrieb am 14.11.16 10:45:34
      Beitrag Nr. 1.185 ()
      GE lässt die Prozenthürde fallen. Ca 73,5% sind unter GEs Kontrolle.

      http://www.geaviation.com/additive/arcam-ab/pdf/release-ge-d…
      4 Antworten
      Avatar
      schrieb am 28.12.16 22:23:50
      Beitrag Nr. 1.186 ()
      Antwort auf Beitrag Nr.: 53.687.580 von linkshaender am 14.11.16 10:45:34The nomination committee of Arcam AB (publ)

      Arcam AB (publ), listed on NASDAQ Stockholm, announces today that the members of the company’s nomination committee have resigned.

      Following completion of the recommended public cash offer to the shareholders of Arcam, GE Aviation (an operating unit within General Electric Company), through its wholly owned subsidiary GE Sweden Holdings AB, is the owner of over 76% of the shares and votes in the company. In light of the new concentrated ownership structure in Arcam, the nomination committee members, Olof Jonasson, Thomas Carlström and Rolf Ekedahl, have given notice that they resign from their engagements in the nomination committee. No new nomination committee members have been appointed.
      3 Antworten
      Avatar
      schrieb am 07.02.17 11:12:08
      Beitrag Nr. 1.187 ()
      Antwort auf Beitrag Nr.: 53.968.763 von R-BgO am 28.12.16 22:23:50Hi,
      ich bin schon seit Monaten stiller Mitleser in diesem Forum. Nun ist es um diesen thread doch ruhiger geworden und ich frage mich warum? Ist diese Aktie "gelaufen" und sollte man zu diesem Zeitpunkt die Gewinne mitgenommen haben, oder kommt da noch was?

      Ich bin selbst noch investiert und Arcam steht bei mir dzt. mit +28,9% im depot. Ich bin unsicher wie lange ich noch halten sollte bzw. oder ob gleich verkaufen. Was wäre denn eure Meinung/Empfehlung/Prognose wie es weiter geht jetzt nach der Übernahme?

      Vielen Dank!
      lg mr.tricorder
      2 Antworten
      Avatar
      schrieb am 13.02.17 09:17:50
      Beitrag Nr. 1.188 ()
      AP&C receives significant order for MIM applications


      Arcam AB, listed on NASDAQ Stockholm, and a leading supplier in the Additive Manufacturing (“AM”) field, announces that its powder manufacturing subsidiary AP&C in Montreal, Canada, has received a significant order for MIM (Metal Injection Molding) applications.

      With AP&C’s fast growth and its expansion with a state of the art powder manufacturing plant in Montreal, AP&C is already established as the largest supplier of Titanium powders to the Additive Manufacturing industry.
      This order establishes AP&C as a major supplier also in the MIM application field.

      The order is for Ti6Al4V MIM powder and the order volume is 30 tons to be delivered during 2017.
      Avatar
      schrieb am 13.02.17 09:28:47
      Beitrag Nr. 1.189 ()
      Antwort auf Beitrag Nr.: 54.257.453 von mistertricorder am 07.02.17 11:12:08
      jeglicher Rat an Dich
      würde voraussetzen, dass man Deine ganze Situation und Deine innere Verzagtheit (Ziele, Risikoneigung, etc.) kennt;

      deswegen wirst Du einen solchen von mir definitiv (und von anderen wahrscheinlich auch) nicht bekommen.


      Was ich sagen kann, ist

      -eine 28% Position stellt in jedem Depot ein erhebliches Klumpenrisiko dar

      -Arcam ist rein fundamental -insbesondere nach dem 2016er dip- m.E. aktuell sehr gut bezahlt, weitere Kursgewinne wären wohl erst in fernerer Zukunft gerechtfertigt

      -aufgrund der Übernahmesituation ist es sowieso was Spezielles:

      a) kann man vermuten, dass GE nicht zucken wird, immerhin haben sie SLM auch sausen lassen
      b) Singer/Elliot hat einen ziemlich guten track-record und oft auch mehr als nur ein paar Prozent Nachschlag rausgeholt; was man aber wahrscheinlich ausschließen kann, ist ein Verdoppler im Übernahmefall

      =>habe keine Ahnung, wie es ausgehen wird.


      Ich persönlich halte derzeit erstmal weiter, weil es sowieso nur eine Ansichtsstücke-Position ist und es deswegen keinen großen Unterschied macht, wie es am Ende ausgeht. Bin auch gespannt auf den weiteren Verlauf.
      1 Antwort
      Avatar
      schrieb am 15.02.17 10:33:30
      Beitrag Nr. 1.190 ()
      Antwort auf Beitrag Nr.: 54.304.373 von R-BgO am 13.02.17 09:28:47Danke für Deine Einschätzung.
      Ich würde mich selbst als spekulativ einschätzen.
      Meine Überlegung war die Gewinne mitzunehmen und damit bei Apple, Nvidia und Tesla weiter nachkaufen. Habe aber noch wenig Erfahrung (2 Jahre) und bin deswegen unsicher ob ich bei Arcam AB nicht etwas übersehe und es deswegen besser wäre noch länger zu halten.
      Aber danke erst mal für Deine Ausführungen.
      LG.
      Avatar
      schrieb am 10.10.17 09:09:29
      Beitrag Nr. 1.191 ()
      Arcam resolves on a preferential rights issue of approximately MSEK 986

      The Board of Directors of Arcam Aktiebolag (publ) (“Arcam” or the “Company”) has, pursuant to the authorization granted by the annual general meeting on 16 June 2017, resolved on a new share issue of a maximum of 4,109,286 ordinary shares with preferential right for the Company’s existing shareholders (the “Rights Issue”).

      If the Rights Issue is fully subscribed, the Company will be provided with approximately MSEK 986 before deduction of transaction costs. The subscription price in the Rights Issue is SEK 240 per ordinary share.


      Summary

      The Company intends to use the proceeds from the Rights Issue to, amongst other things, cover the continued expansion of production capacity for metal powder at AP&C, cover an increased need of working capital to handle expansion in turnover, increase research and development of EBM and AP&C and increase EBM production capacity.

      Shareholders receive one (1) subscription right for each ordinary share held as of the record date. Five (5) subscription rights entitles the holder to subscribe for one (1) new ordinary share in the Rights Issue.
      The record date to participate in the Rights Issue is 19 October 2017.

      Subscription in the Rights Issue may occur under the period as of 25 October 2017 up to and including 9 November 2017.

      If the Rights Issue is fully subscribed, the Company will be provided with approximately MSEK 986 before deduction of transaction costs.

      The subscription price in the Rights Issue is SEK 240 per ordinary share.

      General Electric Company (through its wholly owned subsidiary GE Sweden Holdings AB) and other shareholders have undertaken to subscribe for their respective pro rata share of the Rights Issue corresponding to a total of 88.11 percent of the Rights Issue and have guaranteed the remaining portion of the Rights Issue. Consequently, the Rights Issue is fully guaranteed.


      Background and rationale

      The Board of Directors expects that Arcam’s investments will provide the Company with greater opportunities and the potential to continue to achieve favorable growth and profitability, but it will also result in greater risks if its increased costs are not offset by higher sales in the short term. To ensure that Arcam is able to carry out its growth plan, the Board of Directors has therefore decided to implement a Rights Issue which will provide the Company with approximately MSEK 986 before issue costs. The Rights Issue will enable the accelerated expansion and development of the Company, its addressable market and its products. The size of the Rights Issue is a further confirmation of Arcam’s ambition to make long-term investments in its technology and capacity, and will thus strengthen the Company’s credibility in the eyes of customers deciding whether or not to switch to Additive Manufacturing.


      The proceeds are expected to be used as follows:

      -approximately MSEK 330 for the continued expansion of production capacity for metal powder at AP&C;
      -approximately MSEK 295 in working capital to handle expansion in turnover;
      -approximately MSEK 125 for increased research and development of EBM to stabilize technology and accelerate the next product generation;
      -approximately MSEK 125 for increased research and development of AP&C for enhanced plasma spheroidization and powder management;
      -approximately MSEK 110 for EBM to increase production capacity and for additional training and application facilities.


      The Rights Issue

      The Board of Directors of Arcam has today resolved on a rights issue of up to a maximum of approximately MSEK 986 with preferential right for the Company’s existing shareholders in proportion to their shareholdings as of the record date, 19 October 2017.

      Arcam’s shareholders will have pre-emptive rights to subscribe for new ordinary shares in proportion to their holdings. For every ordinary share held on the record date, the holder will receive one (1) subscription right. Five (5) subscription rights entitle the holder to subscribe for one (1) new ordinary share. The subscription price is set at SEK 240 per share, which means that the Rights Issue will raise a maximum of approximately MSEK 986, before the costs for the Rights Issue, through the issuance of a maximum of 4,109,286 ordinary shares. The Rights Issue will result in an increase of the share capital of a maximum of approximately SEK 4,109,286. After the Rights Issue, the number of shares in Arcam will amount to a maximum of 24,855,871, of which 24,655,871 will comprise of ordinary shares and 200,000 will comprise of preference C shares, and the share capital will amount to a maximum of approximately SEK 24,855,873. For existing shareholders who do not participate in the Rights Issue, a dilution effect arises corresponding to 16.67 percent of the total number of ordinary shares and votes in the Company after the Rights Issue. Shareholders who choose not to participate in the rights issue may be able to compensate for this dilution by selling their subscription rights.

      The record date at Euroclear Sweden AB, for participation in the Rights Issue is 19 October 2017. This means that the shares will trade excluding preferential right to participate in the Rights Issue from and including 18 October 2017. The subscription period runs from and including 25 October 2017 up to and including 9 November 2017, or such later date as decided by the Board of Directors.

      If not all ordinary shares are subscribed for by the exercise of subscription rights (primary preferential right), the Board of Directors is to decide on the allotment of ordinary shares subscribed for without the exercise of subscription rights up to the maximum amount of the Rights Issue. Where, firstly, new ordinary shares that have not been subscribed for with primary preferential rights shall be allotted to the shareholders who on the record date 19 October 2017 are recorded as a shareholder in the share register kept by Euroclear Sweden AB, who have subscribed for and been allotted ordinary shares by exercising subscription rights and who, in addition, have notified their interest to subscribe for new ordinary shares without subscription rights (secondary preferential right). If new ordinary shares are still available after for allotment to those who have exercised the secondary preferential rights, the ordinary shares shall be allocated between the subscribers in relation to the total number of shares held by them in the Company on the record date, and where this is not possible, by drawing of lots. Secondly, if all ordinary shares have not been allocated according to the above, allotment of ordinary shares shall be made to those who have otherwise subscribed for and been allotted ordinary shares by exercising subscription rights and who, in addition, have notified their interest to subscribe for new ordinary shares without subscription rights and, in case of oversubscription, pro rata in proportion to the number of subscription rights used for subscription of ordinary shares, and if this is not possible, by drawing lots. Finally, allotment of the remaining ordinary shares shall be made to the guarantors of the issue, if any, in their capacity as guarantor and in accordance with their respective subscription and guarantee undertaking.

      Subscription of shares by the exercise of subscription rights shall be made through simultaneous cash payment. Subscription of shares without the exercise of subscription rights shall be made on a separate subscription list and subscribed shares shall be paid in cash no later than two banking days after the notice of allotment has been sent to the subscriber, or such later date as the Board of Directors may decide. The new shares entitle to dividends for the first time on the first record date for dividend that take place after the Rights Issue has been registered with the Swedish Companies Registration Office and been recorded in the share register kept by Euroclear Sweden AB.

      The complete terms and conditions for the Rights Issue, together with other information about the Company, will be presented in the prospectus that is expected to be published on the Company's website on or around 24 October 2017.

      Subscription undertakings and guarantees

      General Electric Company (through its wholly owned subsidiary GE Sweden Holdings AB), with a shareholding corresponding to 76.89 percent of the Rights Issue, and other shareholders, with shareholdings corresponding to 11.22 percent of the Rights Issue, have undertaken to subscribe for their respective pro rata share of the Rights Issue and have also guaranteed the remaining portion of the Rights Issue. Consequently, the Rights Issue fully guaranteed. More information about the guarantors will be included in the prospectus for the Rights Issue, which is expected to be published on or about 24 October 2017.

      Preliminary time table for the Rights Issue

      October 9th, 2017 Resolution regarding the Rights Issue
      October 17th, 2017 Last day of trading in the shares with the right to participate in the Rights Issue
      October 18th, 2017 First day of trading in the shares without the right to participate in the Rights Issue
      October 19th, 2017 Record date, i.e., shareholders registered in the register kept by Euroclear Sweden AB on this date will receive subscription rights carrying the right to participate in the Rights Issue
      October 20th, 2017 Q3 2017 report is published
      October 24th, 2017 Estimated date for publication of the prospectus
      October 25th - November 7th 2017 Trading in subscription rights
      October 25th - November 9th 2017 Subscription period
      Around November 16th, 2017 The outcome of the Rights Issue is announced
      Around November 27th, 2017 The Rights Issue is completed and registered
      Advisers in connection with the Rights Issue

      Söderlind & Co AB is financial advisor to Arcam and Baker McKenzie is legal advisor in connection with the Rights Issue.

      This information is information that Arcam Aktiebolag (publ) is obliged to make public pursuant to the EU Market Abuse Regulation. The information was submitted for publication, through the agency of the contact person set out below on 10 October 2017, at 8.30 a.m. CET.
      Avatar
      schrieb am 20.10.17 14:59:03
      Beitrag Nr. 1.192 ()
      raus bis aufs Erinnerungsstück
      Avatar
      schrieb am 29.11.17 11:01:45
      Beitrag Nr. 1.193 ()
      Wettbewerb?: https://www.desktopmetal.com/news/popular-science-award/

      PRESS RELEASE - Popular Science Names Desktop Metal Production System "2017 Best of What's New" in Engineering

      OCT 17 2017—BURLINGTON, Mass. –

      Highlighting its speed and inkjet technology, Popular Science recognized the Desktop Metal Production System™ with its “2017 Best of What’s New” award in the Engineering category. The Production System is the first metal 3D printing system for mass production of complex metal parts that is up to 100 times faster than current laser systems. Arriving in 2018, the Production System delivers the speed, quality, and cost-per-part needed to compete with traditional manufacturing processes.

      Created by the inventors of ground-breaking technologies in both 3D and 2D printing – binder jetting by Ely Sachs and single pass inkjet by Paul Hoisington – the Production System builds metal parts in a matter of minutes instead of hours. Leveraging low-cost Metal Injection Molding (MIM) powder, it is designed to deliver high throughput and per-part costs that are competitive with traditional manufacturing processes—up to 20x lower than today’s laser-based additive manufacturing systems.

      "The Best of What's New awards honor the innovations that shape the future," says Joe Brown, Editor in Chief, Popular Science. "From life-saving technology to incredible space engineering to gadgets that are just breathtakingly cool, this is the best of what's new."

      Desktop Metal, the company committed to making metal 3D printing accessible to manufacturers and engineers, recently launched its metal 3D printing systems covering the full product lifecycle -- from prototyping to mass production. The Studio System™ is the first office-friendly metal 3D printing system for rapid prototyping and is up to 10 times less expensive than existing technology today. To manufacture metal 3D printed parts at scale, Desktop Metal also debuted the only 3D printing system for mass production of high resolution metal parts today, the Production System.

      About Desktop Metal Desktop Metal, Inc., based in Burlington, Massachusetts, is accelerating the transformation of manufacturing with end-to-end metal 3D printing solutions. Founded in 2015 by leaders in advanced manufacturing, metallurgy, and robotics, the company is addressing the unmet challenges of speed, cost, and quality to make metal 3D printing an essential tool for engineers and manufacturers around the world. In 2017, the company was selected as one of the world’s 30 most promising Technology Pioneers by World Economic Forum, and was recently named to MIT Technology Review’s list of 50 Smartest Companies. For more information, visit www.desktopmetal.com.
      Avatar
      schrieb am 29.11.17 15:09:50
      Beitrag Nr. 1.194 ()
      Ja, kenne ich. Werft doch mal ein Auge auf die australische Aurora Labs, ich bin der einzige in Deutschland, der bei w:o darüber schreibt.;)
      Die wollen auf 100-1000fache Geschwindigkeit im Metalldruck kommen, ab Ende 2018...
      Dass die Genauigkeit darunter leidet, dürfte logisch sein, allerdings soll die patentrechtlich geschützte Methode anders sein, alls alles bisher Dagewesene, die Präsentationen zeigen den Vergleich zu den Wettbewerbern in Bauraumgröße, Geschwindigkeit und Auflsösung.
      Ziel ist 1 Tonne in 24 Stunden, vor allem im Bereich Minen und Ölförderequipment will man sich positionieren, teure Ersatzteilbeschaffung dürfte dort ziemlich teuer werden.

      Den günstigsten Metalldrucker der Welt haben sie ja bereits rausgebracht. Auf der Formnext hätte man ihn betrachten können.
      Die zwei neuen Drucker sollen mit dieser [Laser]Technik jedoch nichts mehr gemeinsam haben.

      Es wurde schon spekuliert, ob es ein Metallspritzverfahren wie bei Trumpf oder Titomic sein könnte, wäre dann jedoch nicht das postulierte Alleinstellungsmerkmal.


      https://3dprint.com/90875/aurora-labs-metal-3d-printer/

      http://auroralabs3d.com/

      Beachtenswert ist, dass es ehemals eine Kickstarterkampagne war, die sich dann Mitte 2016 zum Börsengang gemausert hat.
      Avatar
      schrieb am 01.12.17 11:01:27
      Beitrag Nr. 1.195 ()
      Arcam evaluates strategic alternatives for DTI

      The Board of Directors of Arcam AB (publ) ("Arcam" or the "Company") has resolved to initiate a process to explore and evaluate strategic alternatives regarding DiSanto Technology Inc. (“DTI”), to strengthen its focus and capabilities within both Additive Manufacturing and conventional manufacturing. As part of this process, the Company intends to consider a range of strategic and structural options, which may include, among other things, a restructuring, full or partial separation of DTI via a spin-off, sale, joint venture, strategic collaboration or other transaction.

      The evaluation is part of Arcam's continued efforts to allocate resources and capital to maximize the advancement of Arcam’s offerings for its customers. Arcam’s objective is to strengthen DTI’s ability to serve as a contract manufacturing partner to orthopedic customers seeking to combine the benefits of additive manufacturing with traditional manufacturing capabilities.

      There can be no assurance that this review will result in a transaction. Although Arcam expects to proceed in a timely manner, there is no timetable for completion of the review process and the Company does not intend to announce any updates other than what is required by law and the stock exchange rules.

      Arcam has engaged Viant Capital, LLC as financial advisor to assist in the review of strategic alternatives for DTI.

      About DTI

      DTI in the US offers contract manufacturing of orthopedic implants. Production involves both Arcam’s EBM® technology and more conventional equipment and manufacturing capabilities. DTI produces a wide range of components in titanium, cobalt chrome and medical grade plastics. DTI has significant experience in manufacturing services for the orthopedic market including prosthesis parts for hip joints, knees, spine and extremities. DTI’s office is located in Shelton, CT, United States.

      This information is information that Arcam Aktiebolag (publ) is obliged to make public pursuant to the EU Market Abuse Regulation. The information was submitted for publication, through the agency of the contact person set out below on 1 December 2017, at 8:30am CET.
      Avatar
      schrieb am 28.12.17 09:41:13
      Beitrag Nr. 1.196 ()
      GE increases its shareholding in Arcam to more than 90 per cent

      Arcam AB (publ) (“Arcam”) has been informed that GE Sweden Holdings AB
      (a wholly-owned subsidiary of General Electric Company and part of GE Additive and GE Aviation, an operating unit of General Electric) (”GE”) has agreed to acquire Elliott Management’s and Polygon Investment Group’s respective shares in Arcam at a price of SEK 345 per share. Upon the completion of the acquisitions on 29 December 2017, GE will hold approximately 95 per cent of the shares in Arcam.

      GE has informed that it plans to utilize its right under the Swedish Companies Act to buy-out the remaining shares in Arcam and that it intends to request that Arcam applies for delisting of Arcam’s ordinary shares from Nasdaq Stockholm.

      Arcam will announce further information on the contemplated buy-out and the delisting as soon as formal decisions have been made.

      GE’s press release announcing the transaction is available at www.geadditive.com.
      1 Antwort
      Avatar
      schrieb am 12.01.18 10:56:10
      Beitrag Nr. 1.197 ()
      Antwort auf Beitrag Nr.: 56.556.154 von R-BgO am 28.12.17 09:41:13The board of Arcam applies for de-listing and GE initiates compulsory redemption


      On 27 December 2017, Arcam AB (publ) (“Arcam”), announced information regarding GE Sweden Holdings AB ("GE") acquisition of additional shares in Arcam. Following completion of the acquisition GE has been registered as shareholders in the share register of Arcam of the acquired shares and holds app. 95 percent of the shares and votes in Arcam. GE has informed Arcam’s board of directors that GE has resolved to call for a compulsory redemption of the remaining shares in Arcam.

      Considering the above, Arcam’s board of directors makes the assessment that circumstances for a well functional and satisfactory trading in the company's shares no longer exist. Accordingly, the board of directors of Arcam has applied for de-listing of the company's shares from Nasdaq Stockholm. Nasdaq Stockholm has approved the application and resolved that the last day of trading in the Arcam share will be Friday, January 26, 2018.
      Avatar
      schrieb am 11.06.18 19:03:25
      Beitrag Nr. 1.198 ()
      Leider habe ich nicht aufgepasst und das delisting nicht mitbekommen. So sitze ich noch auf 150 shares und weiß nicht, wie ich sie loswerden kann. Die Consors kann mir nicht helfen. Hat jemand einen Tipp?
      1 Antwort
      Avatar
      schrieb am 12.09.18 13:22:27
      Beitrag Nr. 1.199 ()
      Antwort auf Beitrag Nr.: 57.960.495 von lok am 11.06.18 19:03:25
      Avatar
      schrieb am 16.11.18 20:01:33
      Beitrag Nr. 1.200 ()
      Geniales, revolutionäres und vollkommen neuartiges Prinzip von Aurora Labs (AU:A3d) für den Metalldruck, IP gesichert.
      War Arcam meine alte Liebe, ist diese nun übergegangen auf Aurora Labs, die schon seit 2014 besteht.
      Empfehlung, Video auf Geschwindigkeit 0,5 oder langsamer
      stellen:

      Avatar
      schrieb am 15.09.19 16:54:40
      Beitrag Nr. 1.201 ()
      Erinnerungsstück
      wurde im Februar ausgebucht
      • 1
      • 3
       Durchsuchen


      Beitrag zu dieser Diskussion schreiben


      Zu dieser Diskussion können keine Beiträge mehr verfasst werden, da der letzte Beitrag vor mehr als zwei Jahren verfasst wurde und die Diskussion daraufhin archiviert wurde.
      Bitte wenden Sie sich an feedback@wallstreet-online.de und erfragen Sie die Reaktivierung der Diskussion oder starten Sie
      hier
      eine neue Diskussion.

      Investoren beobachten auch:

      WertpapierPerf. %
      +0,66
      -1,37
      +0,13
      -0,14
      -0,78
      -1,13
      +0,90
      -1,99
      -0,88
      -1,10
      Arcam AB - 3D-Druckanbieter