Chariot Resources - der Zug rollt an - 500 Beiträge pro Seite

[redwine5]

Nachdem die Gesellschaft in den letzten Wochen schon sehr gute Bohrresultate veröffentlicht hat, gab es gestern nochmals gute News, worauf die Aktie auch schon reagiert hat, aber ich glaube der grosse Run steht noch bevor:

*************************
UPDATE 1-S.Korea says finds copper resource in Peru
Wednesday 28 December 2005, 10:20pm EST
Printer Friendly | Email Article | Reprints | RSS

(Adds resource details)

SEOUL, Dec 28 (Reuters) - South Korea`s LS-Nikko Copper Inc. and state-run Korea Resources Corporation have discovered 400 million tonnes of copper resources in Peru, Seoul`s energy ministry said on Wednesday.

The two firms would jointly develop a copper mine with Canadian miner Chariot Resources Ltd. and production was expected to start in 2009, the ministry said in a statement.

The copper was discovered near Peru`s south coast and would yield an estimated 50,000 tonnes of copper concentrate and 43,000 tonnes of copper cathode annually for 15 years, the ministry said.

The three companies signed a contract last year to develop the mine and have invested a combined $252.2 million.

Chariot bought the Marcona site from Rio Tinto, the world`s No. 2 miner, and Shougang Hierro Peru for $43.5 million in 2004.

Under the contract, the two Korean companies would each hold a 15 percent stake in the venture with Chariot holding the remainder.

LS-Nikko, South Korea`s only copper producer, would take up to 90 percent of the copper concentrate produced at the Marcona project when mining began, the ministry said in the statement.

It would also have the right to purchase up to 70 percent of Marcona`s copper cathode.

LS-Nikko is a joint venture between LS Cable (006260.KS: Quote, Profile, Research) and a Japanese consortium led by Nippon Mining and Metals, part of Nippon Mining Holdings (5016.T: Quote, Profile, Research).

© Reuters 2005. All Rights Reserved.

[redwine5]

Weitere gute News und der Kurs steigt weiter....

Aber die besten News sollten im April kommen, wenn die neuen Resource Schätzungen rauskommen.

Chariot sollte im 2009 ein Produzent sein.

*****************************************

Chariot Encounters Cu Intercepts Of 18 Metres At 6.26%, 12 Metres At 10.66%, And 8 Metres At 6.70% From HG Sulphide Zone
2/23/2006
TORONTO, Feb 23, 2006 (BUSINESS WIRE) --

Chariot Resources Limited ("Chariot") (TSX:CHD) is pleased to announce additional results from the feasibility study drill program for the Mina Justa deposit located at its Marcona Copper Project in Peru. These results were not available at the time of the press release of February 21, 2006.

The additional results outlined are from the HG Sulphide zone. The HG Sulphide zone has both copper oxide mineralization and sulphide mineralization with both types often occurring in the same drill hole.

Notable additional drill intercepts from the HG Sulphide zone that were not available for inclusion in the February 21, 2006 press release are:

- 138 metres of high grade oxide and sulphide mineralization including:

-- 24 metres at above 0.65% Cu copper oxide mineralization, and

-- 114 metres at 3.05% Cu copper sulphide mineralization (which includes 12m of internal dilution), including

--- 18 metres at 6.26% Cu, and

--- 12 metres at 10.66% Cu, and

--- 8 metres at 6.70% Cu

The results released on February 21 came from 18 out of the first 35 holes drilled since the start drilling at Mina Justa. The results released today come from hole MJV-06-039 which is situated 60 metres southwest from a hole MA-064 which was drilled by previous owners Rio Tinto, 50 metres southwest from MJV-06-035 and 100m south of MJV-06-031. The results from holes MJV-06-031 and MJV-06-035 where released on February 21, 2006.

Consistent with previously reported results, all intersections were determined using a 0.25% Cu cut-off and less than 2 metres of internal waste. Higher grade intersections were calculated using a 1% Cu cut-off and less than 2 metres of internal waste. All intercepts are down-hole length and intersection true widths have not been calculated.

Sampling procedures for the current drilling program are the same as previously reported and in summary: All RC chips are logged at the Marcona project site. Holes are sampled in their entirety in two metre runs and split at the drill site. A 1/8 split or approximately 5 kilograms of a two metre sample is submitted to the on-site SGS Lakefield Research ("SGS") preparation facility where samples are crushed to 95% passing 10 mesh and riffle split from which a 250 gram sub-sample is taken. The sub-sample is submitted to SGS, in Lima, for analysis. The coarse sample prep reject is bagged and stored on site and following analysis the analytical pulp sample is returned to Chariot for on-site storage.

All samples are analyzed for copper (Cu) using sequential leach resulting in four Cu analyses per sample (Cu total, Cu soluble in sulphuric acid, Cu soluble in sodium cyanide and a Cu residual). Gold is sampled using a 30 gram Fire Assay with an AA finish. Sulphide samples are submitted for 38 element ICP analysis with aqua-regia digest. Quality control procedures include insertion of certified project standards at the drill site (1 in 20), field duplicate samples (1 in 20), laboratory duplicates (1 in 20) and reagent blanks and reference material (1 in 20).

Data contained in this news release was validated and intersections calculated by Robert William Baxter, BSc. Hons. App. Geology, Director, Executive VP, Chariot Resources Limited, the designated Qualified Person as defined in National Instrument 43-101,

Mr. Alex Black, Chairman, said, "The results from hole MJV-06-039 appear to extend the very high grade core of the HG Sulphide zone. This zone was initially encountered by previous project owners, Rio Tinto. Wide spaced drilling by Chariot last year extended the zone to about 400 metres by 600 metres. This latest hole does not appear to extend the overall size of the HG Sulphide zone but it does appear to extend the very high grade core that is part of this zone".

Chariot Resources Limited (TSX:CHD) is developing its 70% owned Marcona Copper Project in Peru. With exceptional infrastructure, a significant resource and strong financial and commercial partners, Chariot`s Marcona Copper Project is scheduled to be a mid-tier copper producer by 2009.

[davec2k]

wurde heute durch einen Kunden darauf aufmerksam..

ist das was? Chart sieht nicht schlecht aus imo..

[redwine5]

Ich denke schon, heute haben wir wieder gute News. Es gibt also noch mehr Leute, die grosses Interesse an der Gesellschaft zeigen - kein Wunder bei den Reserven, welche CHD diese Woche schon publiziert hat (Auszug aus Filing vom 28.2.2006):

At this cut-off, the Mina Justa deposit contains 5.7 billion pounds of copper, 50.5 million oz of silver and 428,000 oz of gold.

Nachstehend noch noch die News von heute.

Happy Investing.....

*****************************

Chariot Resources arranges $17.2-million financing


Chariot Resources Ltd (TSX:CHD)
Shares Issued 182,365,147
Last Close 3/1/2006 $0.435
Wednesday March 01 2006 - News Release

Mr. Ulli Rath reports

CHARIOT RESOURCES LIMITED ANNOUNCES BOUGHT DEAL FINANCING

Chariot Resources Ltd. has today entered into an agreement with a syndicate of underwriters co-led by Raymond James Ltd. and Haywood Securities Inc., under which the underwriters have agreed to buy 40 million common shares from Chariot at an issue price of 43 cents per common share, representing a total offering of $17.2-million. The company will grant the underwriters an option, exercisable up until 48 hours prior to the closing of the offering, to purchase up to an additional 2.5 million common shares at the issue price. The company expects to file a preliminary short form prospectus with the securities regulatory authorities to qualify the common shares for distribution. Closing is expected on or about March 21, 2006.

The offering is being made in British Columbia, Alberta, Manitoba, Ontario and Quebec, and is subject to the approval of regulatory authorities. The securities offered have not been registered under the United States Securities Act of 1933, as amended, and may not be offered or sold in the United States absent registration or an applicable exemption from the registration requirements. This press release shall not constitute an offer to sell or the solicitation of an offer to buy nor shall there be any sale of the securities in any state in which such offer, solicitation or sale would be unlawful.

[redwine5]

Wieder Super-News der Gesellschaft - Details zur Scoping Study mit folgenden Highlights:

TORONTO, ONTARIO--(CCNMatthews - May 3, 2006) - Chariot Resources Limited ("Chariot") (TSX:CHD - News)

- Annual Production: up to 260 M lbs of copper

- Potential add-on projects could add US$107 million to NPV

- Feasibility study progressing well

- Drilling on new exploration targets to commence Q3

Chariot Resources Limited ("Chariot") (TSX:CHD - News) is pleased to announce highlights from the Scoping Study by GRD Minproc of the Mina Justa project located at the Company's 70% owned Marcona Copper Project in Peru (see Attachment 1, note all dollars are US dollars). A 43-101 compliant Independent Technical report will be filed on SEDAR within 45 days

As noted in the Scoping Study the key financial performance indicators for the Mina Justa project are:

Internal Rate of Return 28 % Net Present Value $ 364 million Capital Payback 4.6 years Cumulative Net Cash Flow $ 892 million Initial Capital $ 236 million

The Net Present Value of the Mina Justa project has been calculated from a 100% equity, pre-tax cash-flow analysis using a copper price of $1.20/lb and a discount rate of 8%. Other prices used are silver at $4.50/oz and magnetite at $10.50/t concentrate.


Den ganzen News-Release ist hier zu finden:

http://biz.yahoo.com/ccn/060503/200605030325298001.html?.v=1


Der Aktie hat bereits reagiert (knapp +10%), bei einem Kurs von Kupfer von über 3 USD/lb (die Study spricht von 1.2/lb für die Berechnung) hat die Gesellschaft sicher noch einiges Potential.

Happy Investing.....

[Dangelino]

Wie lässt sich Chariot Resources am Besten ordern? Sie ist zwar in Berlin gelistet, aber die DAB Bank lässt es bei mir nicht zu irgendwas von bzw. irgendwo Chariot zu ordern.

[Dangelino]

Nun geht's auch bei der DAB wieder...

[Dangelino]

Bin heute in Kanada an Bord gegangen und gespannt wie weit die Reise geht. In Deutschland tut sich bisher so gut wie nichts, aber das wird sich ändern sobald das Team eines bekannten Börsenbriefs von seiner Peru-Reise zurückkehrt.

[redwine5]

Antwort auf Beitrag Nr.: 21.446.964 von Dangelino am 05.05.06 16:44:29

Hallo Dangelino

Ich habe die Aktien in Toronto gekauft (über UBS).

Ich denke, das war ein guter Kauf. Die Aktie hat ja auch schon wieder zugelegt.

Hier noch ein interessanter Aspekt aus dem News-Release vom 3.5.06 mit den Highlights der Scoping Study für die Mine in Peru rausgegeben. Basierend auf einem Kupferpreis von USD 1.20/lb hat das Project ein NPV von USD 364 Mio. Gemäss Release würde eine 10% Preiserhöhung im Kupfer den NPV um 35% erhöhen. Heute wurde für Kupfer rund 3.50/lb bezahlt, d.h. etwa 190% mehr. Diese 190% würden demzufolge den NPV um rund 665% auf 2.4 Mrd. erhöhen.

Die Gesellschaft hat ca. 180 Mio. ausstehende Aktien. Würde also rund einen Kurs von USD 13 machen. Gestern wurde die Aktie bei CAD 0.58 (+9%) gehandelt. Hat wahrscheinlich schon noch ein wenig Potential oder nicht?

Wird sicher eine interessante Reise. Cheers.

[Dangelino]

Chariot startet heute wieder gut in den Tag mit +5%.

[redwine5]

Antwort auf Beitrag Nr.: 21.491.158 von Dangelino am 09.05.06 16:14:50

Ja, ist schön zu sehen, dass wir mit gutem Volumen weiter nach oben gehen (+13%) heute. Die Warrants haben sogar 40% zugelegt.

Aber mit dem weiter steigenden Kupferpreisen wird die Gesellschaft ja auch laufend mehr wert - und in nicht allzu ferner Zukunft sollten auch noch zusätzliche Bohrresultate kommen.

Schauen wir mal wie es weiter geht, Potential im Kurs ist ja noch reichlich vorhanden. Cheers und viel Spass.

[Dangelino]

Es gibt News (Bohrergebnisse):

Chariot Announces Drilling Results Outside the Mina Justa Main Pit Area Including 28 Metres at 3.97% Cu; 10 Metres at 4.56% Cu and 34 Metres at 2.02% Cu
5/10/2006

TORONTO, ONTARIO, May 10, 2006 (MARKET WIRE via COMTEX News Network) --
Chariot Resources Limited ("Chariot") (TSX:CHD) is pleased to announce further drill results from its 2006 drilling campaign at the Marcona Copper Project. These results are from areas that lie outside the ultimate pit boundary of the Mina Justa Main Pit as defined in the Scoping Study recently completed by independent consulting engineers, GRD Minproc. Highlights from the Scoping Study were released on May 3, 2006.

Magnetite Manto: This is target (3b) as described in the Long-Form Prospectus dated December 21, 2004. Drill results from initial holes were released on November 16, 2005. The Scoping Study has identified this area as having the potential to add value to the Mina Justa base case if additional drilling can identify a high-grade copper oxide resource that may be incorporated into the mine plan. Magnetite Manto is located approximately 1km west of the Mina Justa Main Pit.

Notable highlights at Magnetite Manto are (all results are copper oxide mineralization):


- MJV-06-127 50 metres at 2.49% Cu, including
28 metres at 3.97% Cu
- MJV-06-129 56 metres at 1.98% Cu, including
6 metres at 5.77% Cu and
14 metres at 2.96% Cu, including
8 metres at 4.02% Cu
Eastern Pit Area: This area is located east of the Mina Justa Main Pit. Initial drill results were released on August 15, 2005. Recent drilling has encountered promising results outside the ultimate pit boundary as currently defined which suggest that the Eastern Pit Area is potentially larger than previously expected.

Notable highlights from the Eastern Pit Area are (all results are copper sulphide mineralization):

- MJV-06-092 20 metres at 2.61 % Cu, including 10 metres at 4.56% Cu - MJV-06-097 22 metres at 1.22 % Cu, including 6 metres at 3.36% Cu

SE Extension Area: This area (targets 2a and 2b) is located to the south of the Mina Justa Main Pit. Drill results from initial holes in this area were released on July 18, 2005. The Scoping Study has identified the SE Extension Area as having potential for the underground mining of copper sulphide mineralization that could add value to the Mina Justa base case, subject to further drilling.

Notable highlights from recent drilling at the SE Extension zone are (all results are copper sulphide mineralization):


- MJV-06-071 22.6 metres at 2.62% Cu, including
3.6 metres at 3.88% Cu
- MJV-06-073 34 metres at 1.77% Cu, including
4 metres at 2.54% Cu and
10 metres at 2.82% Cu
- MJV-06-128 28 metres at 1.23 Cu, including
10 metres at 2.30% Cu which includes
4 metres at 3.75% Cu
- MJV-06-130 34 metres at 2.02% Cu, including
10 metres at 4.36% Cu
All intersections were determined using a 0.25% Cu cut-off and less than 2 metres of internal waste. High-grade intersections in copper oxide mineralization were calculated using a 1% Cu cut-off and less than 2 metres of internal waste. Higher-grade intersections in copper sulphide mineralization were determined using a 2% Cu cut-off. All intercepts are down-hole length and intersection true widths have not been calculated.

Sampling procedures for the current drilling program are the same as previously reported and in summary: All RC chips are logged at the Marcona project site. Holes are sampled in their entirety in two metre runs and split at the drill site. A 1/8 split or approximately 5 kilograms of a two metre sample is submitted to the on-site SGS Lakefield Research ("SGS") preparation facility where samples are crushed to 95% passing 10 mesh and riffle split from which a 250 gram sub-sample is taken. The sub-sample is submitted to SGS, in Lima, for analysis. The coarse sample prep reject is bagged and stored on site and following analysis the analytical pulp sample is returned to Chariot for on-site storage.

All samples are analyzed for copper (Cu) using sequential leach resulting in four Cu analyses per sample (Cu total, Cu soluble in sulphuric acid, Cu soluble in sodium cyanide and a Cu residual). Gold is sampled using a 30 gram Fire Assay with an AA finish. Sulphide samples are submitted for 38 element ICP analysis with aqua-regia digest. Quality control procedures include insertion of certified project standards at the drill site (1 in 30), field duplicate samples (1 in 30), laboratory duplicates (1 in 30) and reagent blanks and reference material (1 in 30).

Data contained in this news release was validated and intersections calculated by Robert William Baxter, BSc. Hons. App. Geology, Director, Executive VP, Chariot Resources Limited, the designated Qualified Person as defined in National Instrument 43-101,

Chariot Resources Limited (TSX:CHD) is developing its 70% owned Marcona Copper Project in Peru. With exceptional infrastructure, a significant resource and strong financial and commercial partners, Chariot's Marcona Copper Project is scheduled to be a mid-tier copper producer by 2009.

Additional details about Chariot can be viewed at the Company's website, www.chariotresources.com.

CHARIOT RESOURCES LIMITED.

Alex Black

Chairman

[redwine5]

Die News zeigen, dass man mit Hochdruck weiterarbeitet und die Resourcen-Basis erweitert. Gleichzeitig steigt der Kupferpreis weiter, heute auf 3.70/lb.

Noch eine kleine Korrektur zu meiner kürzlich Grobberechnung. Die Gesellschaft hat nun rund 230 Mio. Aktien ausstehend (nicht 180 Mio.). Zudem gibt es noch rund 70 Mio. Warrants.

Mit dem Kupferpreis von 3.70/lb sind wir nun rund 210% höher als die Basis von 1.20/lb in der Scoping Study. Der NPV würde sich daher um rund 735% auf rund USD 2.7 Mia. erhöhen. Das würde pro Aktie/Warrant immer noch rund USD 8.00 ausmachen. Im Moment handelt die Aktie nun bei CAD 0.72 (+4.3%).

Immer noch einiges Potential.

Happy Investing.

[redwine5]

Mit dem Kupferpreis über 3.90/lb, gibt dies heute weitere USD 200 Mio. zum NPV des Mina Justa Projektes, d.h. wir sind nun bei rund USD 3 Mrd.

Cheers.

[redwine5]

Weiterhin gute News von Chariot:

Chariot Provides Update on Strategy to Fast-Track Mina Justa Project

TORONTO, ONTARIO -- (MARKET WIRE) -- 06/19/2006 -- Chariot Resources Limited ("Chariot") (TSX: CHD) is pleased to announce its strategy to accelerate development of the Mina Justa project and to initiate an exploration program on prospective targets surrounding the project area. Mina Justa is located at the company's 70% owned Marcona Copper Project in Peru.

Project Financing Program Initiated: The first phase of the financing exercise for the Mina Justa project has been initiated by Chariot's 70% owned Peruvian subsidiary, Marcobre S.A.C., under the direction of Mr. Brent Cochrane. Prior to accepting this assignment, Mr. Cochrane was previously the CFO of Compania Minera Antamina S.A. Mr. Cochrane also spent 21 years at Rio Algom Limited and during that time was involved with the project financing for three large copper mines in South America. It is expected that a preliminary information memorandum and term sheet for the Mina Justa project will be available for marketing to potential lenders prior to completion of the Feasibility Study.

Environmental Impact Study Initiated: The preparation of the Environmental/Social Impact Assessment ("ESIA") has been awarded to Vector (Peru). The ESIA process was formally initiated at a public meeting in Tupac Amaru, a suburb of the community of San Juan de Marcona, on May 8th 2006 under the auspices of the Peruvian Ministry of Mines. An ESIA working group has been established with representatives from local sectors including, health, education, environment, fisheries and the municipality. Collection of base line information and archeological assessments have started. The ESIA will be completed to Peruvian and World Bank standards.

Request For Tenders For Feasibility Study: A request for tenders for the Mina Justa Feasibility Study has been issued. It is expected that preliminary proposals will be submitted by June 30, 2006 following which negotiations will be initiated with a short-list of suitable engineering companies and final selection is expected to be made by mid-July.

In regards to other elements of the Feasibility Study, Chariot is pleased to announce that:

Drilling Extended: The previously announced 34,000 metre drilling program at Mina Justa has been extended by an additional 12,500 metres. A large proportion of this extended program has been planned to follow-up the encouraging results encountered in the initial drilling campaign. It is expected that this 12,500 metre drilling program will be completed by the end of June 2006.

New Resource Update: Marcobre SAC is currently working with independent consultant, Snowden Mining Industry Consultants Inc. and other advisors in updating the October 2005 resource model. The new resource model will incorporate the data obtained from the 2006 drilling campaign, new geological information and will be the basis for the compilation of a new resource estimate. This new resource estimate will be incorporated into the Feasibility Study.

Geotechnical Tenders: Proposals for independent geotechnical evaluations and studies have been received and are currently under review. It is expected that a tender will be awarded before the end of the month. The results of these studies, which will include laboratory evaluation of drill core, will be incorporated into the Feasibility Study.

Exploration Permit Approved: Peruvian regulatory authorities have recently approved a category C permit for exploration activities on land surrounding the Mina Justa project. Initially, the exploration activities will consist of geological mapping and sampling and geophysical surveys at several of the key target areas previously identified by Rio Tinto. It is expected that exploration drilling will be initiated after the geological and geophysical information has been evaluated.

On May 3, 2006 Chariot released highlights of the Scoping Study of the Mina Justa project. The key financial performance indicators for the Mina Justa project are:

Internal Rate of Return 28 %
Net Present Value $ 364 million
Capital Payback 4.6 years
Cumulative Net Cash Flow $ 892 million
Initial Capital $ 236 million


The Net Present Value of the Mina Justa project has been calculated from a 100% equity, pre-tax cash-flow analysis using a copper price of $1.20/lb and a discount rate of 8%. Other prices used are silver at $4.50/oz and magnetite at $10.50/t concentrate.

On June 7, 2006 the Board of Directors approved the Scoping Study as the basis upon which to initiate a strategy to accelerate development of the Mina Justa project. On June 16, 2006 the company filed a 43-101 report on SEDAR that incorporates the details of the Scoping Study.

Chariot Resources Limited (TSX: CHD) is developing its 70% owned Marcona Copper Project in Peru. With exceptional infrastructure, a significant resource and strong financial and commercial partners, Chariot's Marcona Copper Project is scheduled to be a mid-tier copper producer by 2009.

Additional details about Chariot can be viewed at the Company's website, www.chariotresources.com.

CHARIOT RESOURCES LIMITED.

Alex Black

Chairman


Contacts:
Chariot Resources Limited
Toronto, Canada Office
Alex Black - Chairman
Office: [phone]
Cell Phone: [phone]

Chariot Resources Limited
Toronto, Canada Office
Ulli Rath - President & CEO
Office: [phone]
Cell phone: [phone]

Chariot Resources Limited
Lima, Peru Office
Bob Baxter - Director
Office: [phone]
Cell Phone: [phone]


SOURCE: Chariot Resources Limited

[redwine5]

Wiederum gute News von Chariot!!

********************************

TORONTO, ONTARIO--(CCNMatthews - July 11, 2006) - Chariot Resources Limited ("Chariot") (TSX:CHD - News) is pleased to announce further drill results from its 2006 drilling campaign at the Marcona Copper Project. These results are from the high-grade core of the HG Sulphide zone that lies within the ultimate pit boundary of the Mina Justa Main Pit as defined in the Scoping Study released on May 3, 2006.

The HG Sulphide zone, including the high-grade core, has both copper oxide mineralization and copper sulphide mineralization with both types often occurring in the same drill hole. The most recent drill results from the high-grade core of the HG Sulphide zone where released on April 12, 2006.

Notable highlights at the HG Sulphide zone are:

- MJV-06-110 copper oxide mineralization 10 metres at 0.62% Cu (40 to 50 m), and 12 metres at 0.74% Cu (222 to 234 m).

copper sulphide mineralization 96 metres at 1.55% Cu (238 to 334 m), including 10 metres at 3.56% Cu (292 to 302 m).

- MJV-06-138 copper oxide mineralization 18 metres at 0.88% Cu (126 to 144 m), and 10 metres at 0.99% Cu (238 to 248 m)

copper sulphide mineralization 80 metres at 2.39% (286 to 366m), including 14 metres at 6.19% Cu (334 to 348 m).

- MJV-06-141 copper oxide mineralization 13.7 metres at 0.54% Cu (30.3 to 44.0m), and 8.9 metres at 0.91% Cu ( 102.8 to 111.8m), and 10.6 metres at 0.99% Cu (135.5 to 146.2 m), and 10.4 metres at 1.03% Cu (169.3 to 179.8 m).

copper sulphide mineralization 18.6 metres at 1.93% Cu (237.4 to 256.1), and 27.2 metres at 4.47% Cu (264.1 to 291.4 m), including 16.6 metres at 6.16% Cu (272.4 to 289.0 m)

- MJV-06-142 copper oxide mineralization 20 metres at 0.56% Cu (114 to 134 m).

copper sulphide mineralization 44 metres at 2.25% (258 to 302m), including 18 metres at 3.94% (282 to 300 m).

- MJV-06-162 copper oxide mineralization 16.5 metres at 0.65% Cu (132.4 to 148.9 m).

copper sulphide mineralization 16.8 metres at 2.78% Cu (176.2 to 193.0 m), and 24.7 metres at 1.88% Cu (229.1 to 253.8 m), and 38.0 metres at 8.14% Cu (277.8 to 315.8 m), including 17.4 metres at 9.10% Cu (279.6 to 297.1 m), and 8.8 metres at 13.05% Cu (300.1 to 308.9 m).

All intersections were determined using a rolling 0.25% Cu cut-off and up to 2 metres of internal waste. High-grade intersections in copper oxide mineralization were calculated using a rolling 1% Cu cut-off and up to 2 metres of internal waste. Higher-grade intersections in copper sulphide mineralization were determined using a rolling 2% Cu cut-off. All intercepts are down-hole length and intersection true widths have not been calculated.

Sampling procedures for the current drilling program are the same as previously reported and in summary: All RC chips are logged at the Marcona project site. Holes are sampled in their entirety in two metre runs and split at the drill site. A 1/8 split or approximately 5 kilograms of a two metre sample is submitted to the on-site SGS Lakefield Research ("SGS") preparation facility where samples are crushed to 95% passing 10 mesh and riffle split from which a 250 gram sub-sample is taken. The sub-sample is submitted to SGS, in Lima, for analysis. The coarse sample prep reject is bagged and stored on site and following analysis the analytical pulp sample is returned to Chariot for on-site storage.

All diamond drill core is photographed and geologically and geo-technically logged prior to sampling. Holes are sampled based on mineralization and geology and sample limits do not cross lithological boundaries. Core is marked and cut with a diamond core saw and half-core is submitted to the laboratory for analysis. The remaining half core and un-sampled intervals are stored at a secure location at the Marcona site where it remains available for further logging and verification sampling, if required.

All samples are analyzed for copper (Cu) using sequential leach resulting in four Cu analyses per sample (Cu total, Cu soluble in sulphuric acid, Cu soluble in sodium cyanide and a Cu residual). Gold is sampled using a 30 gram Fire Assay with an AA finish. Sulphide samples are submitted for 38 element ICP analysis with aqua-regia digest. Quality control procedures include insertion of certified project standards at the drill site (1 in 30), field, crush and pulp duplicate samples (1 in 30 each), laboratory duplicates (1 in 30) and reagent blanks and reference material (1 in 30).

Data contained in this news release was validated and intersections calculated by Robert William Baxter, BSc. Hons. App. Geology, Director, Executive VP, Chariot Resources Limited, the designated Qualified Person as defined in National Instrument 43-101.

Chariot Resources Limited (TSX:CHD - News) is developing its 70% owned Marcona Copper Project in Peru. With exceptional infrastructure, a significant resource and strong financial and commercial partners, Chariot's Marcona Copper Project is scheduled to be a mid-tier copper producer by 2009.

Additional details about Chariot can be viewed at the Company's website, www.chariotresources.com.

CHARIOT RESOURCES LIMITED.

Alex Black

Chairman

[redwine5]

Weitere gute News / neue Bohrresultate und der Kurs zieht wieder langsam an:

*****************************

Press Release Source: Chariot Resources Limited

Chariot Announces Cu Drill Intercepts of 60 Metres at 1.49%; 42 Metres at 2.06%, and 42 Metres at 1.05%; Including 22 Metres at 3.16%, 10 Metres 2.46%, and 30 Metres at 2.95%
Tuesday August 1, 9:15 am ET

TORONTO, ONTARIO--(CCNMatthews - Aug. 1, 2006) - Chariot Resources Limited ("Chariot") (TSX:CHD - News) is pleased to announce further drill results from its 2006 drilling campaign at the Marcona Copper Project. These results are from three zones in which copper oxide mineralization is the most common form of mineralization.

Two of these zones lie, in part, within the ultimate pit boundary of the Mina Justa Main Pit as defined in the Scoping Study released on May 3, 2006. Based on the results released today from these two zones it is likely that the ultimate pit boundary may have to be extended. The third copper oxide zone lies about 1.0 km from the Mina Justa Main Pit.

Northern Oxide zone: This zone comprises copper oxide mineralization from surface to a depth of approximately 200 metres. This zone is also the location for the proposed starter pit operation of the Mina Justa project. The most recent drill results from the Northern Oxide zone were released on June 5, 2006.

Notable highlights from the Northern Oxide zone are (all copper oxide mineralization):

- MJV-06-154 60 metres at 1.49% Cu (106 to 166 m), including 22 metres at 3.16% Cu (138 to 160 m)

- MJV-06-156 14 metres at 1.14% Cu (72 to 86 m), including 6 metres at 2.63% Cu (74 to 80 m) and 36 metres at 0.67% Cu (90 to 126 m), including 4 metres at 1.46% Cu (90 to 94 m) and 12 metres at 0.43% Cu (168 to 180 m)

- MJV-06-159 12 metres at 2.01% Cu (28 to 40 m), including 6 metres at 3.56% Cu (32 to 38 m)

- MJV-06-160 42 metres at 1.05% Cu (60 to 102 m), including 10 metres at 2.46% Cu (64 to 74 m)

- MJV-06-161 36 metres at 0.90% Cu (84 to 120 m), including 14 metres at 1.29% Cu (90 to 104 m)

The most recent drill results from the Northern Oxide zone come from a depth of between 28 metres to 166 metres. The surface expression of this zone as presently defined is approximately 650 metres long and approximately 250 metres wide. Within this zone the results from the 2006 drilling campaign have outlined a high-grade core that measures approximately 300 metres by 75 to 100 metres that has the potential to improve the grade of the ore mined in the early years. The Northern Oxide zone is still open to the northeast and extends outside the ultimate pit boundary of the Mina Justa Main Pit as currently defined.

Western Pit Extension: This area comprises copper oxide mineralization from 30 metres to a depth of approximately 200 metres. On the surface this area is approximately 700 metres long and approximately 300 metres wide. The bulk of this zone also lies within the ultimate pit boundary of the Mina Justa Main pit; however, based on the most recent results it is likely that the pit boundary may have to be extended towards the west.

Notable highlights from the Western Pit extension area are (all copper oxide mineralization):

- MJV-06-195 40 metres at 0.91% Cu (150 to 190 m), including 10 metres at 1.34% Cu (180 to 190 m)

- MJV-06-202 32 metres at 0.70% Cu (30 to 126 m)

- MJV-06-212 32 metres at 0.92% Cu (96 to 128 m), including 10 metres at 1.45% Cu (104 to 114 m)

- MJV-06-213 42 metres at 0.78% Cu (60 to 102 m)

- MJV-06-220 44 metres at 0.96% Cu (82 to 126 m), including 4 metres at 2.78% Cu (104 to 108 m).

Magnetite Manto area: The Scoping Study has identified this area as having the potential to add value to the Mina Justa base case if additional drilling can identify a high-grade copper oxide resource that may be incorporated into the mine plan. Magnetite Manto is located approximately 1 km west of the Mina Justa Main Pit. The current drill results come from a depth of between 4 to 110 metres. The surface expression of the Magnetite Manto is approximately 350 metres long and approximately 300 metres wide. The most recent drill results from the Magnetite Manto area were released on May 10, 2006.

Notable highlights from the Magnetite Manto area are (all copper oxide mineralization):

- MJV-06-167 20 metres at 1.34% Cu (90 to 110 m), including 10 metres at 2.23% Cu (98 to 108 m)

- MJV-06-179 16 metres at 1.73% Cu (4 to 20 m), including 8 metres at 2.72% Cu (4 to 12 m)

- MJV-06-181 42 metres at 2.06% Cu (42 to 88 m), including 30 metres at 2.95% Cu (58 to 88 m).

All intersections were determined using a rolling 0.25% Cu cut-off and up to 2 metres of internal waste. High-grade intersections in copper oxide mineralization were calculated using a rolling 1% Cu cut-off and up to 2 metres of internal waste. Higher-grade intersections in copper sulphide mineralization were determined using a rolling 2% Cu cut-off. All intercepts are down-hole length and intersection true widths have not been calculated.

Sampling procedures for the current drilling program are the same as previously reported and in summary: All RC chips are logged at the Mina Justa project site. Holes are sampled in their entirety in two metre runs and split at the drill site. A 1/8 split or approximately 5 kilograms of a two metre sample is submitted to the on-site SGS Lakefield Research ("SGS") preparation facility where samples are crushed to 95% passing 10 mesh and riffle split from which a 250 gram sub-sample is taken. The sub-sample is submitted to SGS, in Lima, for analysis. The coarse sample prep reject is bagged and stored on site and following analysis the analytical pulp sample is returned to Chariot for on-site storage.

All samples are analyzed for copper (Cu) using sequential leach resulting in four Cu analyses per sample (Cu total, Cu soluble in sulphuric acid, Cu soluble in sodium cyanide and a Cu residual). Gold is sampled using a 30 gram Fire Assay with an AA finish. Sulphide samples are submitted for 38 element ICP analysis with aqua-regia digest. Quality control procedures include insertion of certified project standards at the drill site (1 in 30), field, crush and pulp duplicate samples (1 in 30 each), laboratory duplicates (1 in 30) and reagent blanks and reference material (1 in 30 each).

Data contained in this news release was validated and intersections calculated by John D. Kapusta, P. Geo, Vice-President Exploration and Geological Services, Chariot Resources Limited, the designated Qualified Person as defined in National Instrument 43-101.

Chariot Resources Limited (TSX:CHD - News) is developing its 70% owned Marcona Copper Project in Peru. With exceptional infrastructure, a significant resource and strong financial and commercial partners, Chariot's Marcona Copper Project is scheduled to be a mid-tier copper producer by 2009.

Additional details about Chariot can be viewed at the Company's website, www.chariotresources.com.

CHARIOT RESOURCES LIMITED

Ulli Rath, President & CEO

NOTE: To view the MJV Drillhole Locations map, please visit the following link - http://www.ccnmatthews.com/docs/chariotmap.pdf

[redwine5]

Nochmals neue Bohrresultate - Chariot arbeitet mit "Full Speed":

***************************************

Press Release Source: Chariot Resources Limited

Chariot Provides Mina Justa Project Update and Announces Cu Drill Intercepts of 64 Metres at 2.03% Including 26 Metres at 3.26%; and 28 Metres at 1.88% Including 8 Metres at 3.95%
Wednesday August 23, 9:15 am ET

TORONTO, ONTARIO--(CCNMatthews - Aug. 23, 2006) - Chariot Resources Limited ("Chariot") (TSX:CHD - News) is pleased to provide an update on the Mina Justa project and regional exploration program and announces further drill results from its 2006 drilling campaign at the Marcona Copper Property.

Project Update:

Marcobre SAC (Chariot's 70% owned Peruvian subsidiary) has awarded the Feasibility Study for the Mina Justa project to a consortium of companies led by GRD Minproc. Also included in the consortium is Grana y Montero, a prominent Peruvian construction and engineering company and Knight Piesold who will be responsible for the design of the waste and heap leach dumps and the tailings area. During the next two months the consortium will be concentrating on port evaluations, infrastructure and geotechnical evaluations.

Marcobre SAC has also initiated a regional exploration program on lands surrounding the Mina Justa project. The Marcona Copper Property covers approximately 32,899 hectares. The Mina Justa project, which is the focu of the feasibility Study, is located on the "Target Area 1" property which covers approximately 3,969 hectares. The "Rio Tinto Claims" which consist of 44 contiguous claims around Target Area 1 cover approximately 28,930 hectares.

Four copper prospects have, to date, been identified on lands surrounding the Mina Justa project. These are:

- Achupallas prospect, located on Target Area 1, about 6 km north of Mina Justa

- Miramar prospect, located on the Rio Tinto Claims about 18 km northwest of Mina Justa

- Clavelinas prospect, located on the Rio Tinto Claims about 5 km east from Mina Justa, and

- La Appreciada prospect, located on the Rio Tinto Claims about 15 km east of Mina Justa.

The initial regional exploration program will consist of geological mapping, surface sampling, geophysical surveys and trenching in order to better define these prospects and to develop additional drill targets.

Drilling Campaign:

The drill results outlined in this press release are from two zones. One of these zones, the HG Sulphide zone, lies within the ultimate pit boundary of the Mina Justa Main Pit as defined in the Scoping Study released on May 3, 2006. The second zone, Magnetite Manto, lies approximately 1 km from the Mina Justa Main Pit.

HG Sulphide zone: The HG Sulphide zone, including the high-grade core, has both copper oxide mineralization and copper sulphide mineralization with both types often occurring in the same drill hole. The most recent drill results from the high-grade core of the HG Sulphide zone where released on July 11, 2006.

Notable highlights from the HG Sulphide zone are (all copper sulphide mineralization):

- MJV-06-170 64 metres at 2.03% Cu (356 to 420 m), including 26 metres at 3.26% Cu (360 to 386 m).

- MJV-06-184 28.2 metres at 1.16% Cu (202.4 to 230.6 m), and 21.6 metres at 1.88% Cu (241.6 to 263.6 m), including 11.1 metres at 2.76% Cu (247.5 to 258.7 m).

- MJV-06-175 11.7 metres at 1.28% Cu (177.6 to 189.3m), and 44.9 metres at 1.57% Cu (196.9 to 241.7m), including 19.7 metres at 2.20% Cu (219.1 to 238.8 m), and 23.5 metres at 1.26% Cu (249.1 to 272.6 m).

- MJV-06-168 62 metres at 1.22% Cu (296 to 358 m), including 10 metres at 1.66% Cu (322 to 332 m).

Magnetite Manto zone: The Scoping Study has identified this area as having the potential to add value to the Mina Justa base case if additional drilling can identify a high-grade copper oxide resource that may be incorporated into the mine plan. Magnetite Manto is located approximately 1 km west of the Mina Justa Main Pit. The current drill results come from a depth of between 4 to 144 metres. The surface expression of the Magnetite Manto is approximately 350 metres long and approximately 300 metres wide. The most recent drill results from the Magnetite Manto area were released on August 1, 2006.

Notable highlights from the Magnetite Manto area are (all copper oxide mineralization):

- MJV-06-169 28 metres at 1.88% Cu (12 to 40 m), including 8 metres at 3.95% Cu (24 to 32 m)

- MJV-06-174 18 metres at 1.03% Cu (126 to 144 m), including 2 metres at 2.35% Cu (128 to 130 m), and 4 metres at 1.54% Cu (134 to 138 m).

- MJV-06-188 16 metres at 0.71% Cu (4 to 20m), including 2 metres at 2.34% Cu (8 to 10 m).

All intersections were determined using a rolling 0.25% Cu cut-off and up to 2 metres of internal waste. High-grade intersections in copper oxide mineralization were calculated using a rolling 1% Cu cut-off and up to 2 metres of internal waste. Higher-grade intersections in copper sulphide mineralization were determined using a rolling 2% Cu cut-off. All intercepts are down-hole length and intersection true widths have not been calculated.

Sampling procedures for the current drilling program are the same as previously reported and in summary: All RC chips are logged at the Mina Justa project site. Holes are sampled in their entirety in two metre runs and split at the drill site. A 1/8 split or approximately 5 kilograms of a two metre sample is submitted to the on-site SGS Lakefield Research ("SGS") preparation facility where samples are crushed to 95% passing 10 mesh and riffle split from which a 250 gram sub-sample is taken. The sub-sample is submitted to SGS, in Lima, for analysis. The coarse sample prep reject is bagged and stored on site and following analysis the analytical pulp sample is returned to Chariot for on-site storage.

All diamond drill core is photographed and geologically and geo-technically logged prior to sampling. Holes are sampled based on mineralization and geology and sample limits do not cross lithological boundaries. Core is marked and cut with a diamond core saw and half-core is submitted to the laboratory for analysis. The remaining half core and un-sampled intervals are stored at a secure location at the Marcona site where it remains available for further logging and verification sampling, if required.

All samples are analyzed for copper (Cu) using sequential leach resulting in four Cu analyses per sample (Cu total, Cu soluble in sulphuric acid, Cu soluble in sodium cyanide and a Cu residual). Gold is sampled using a 30 gram Fire Assay with an AA finish. Sulphide samples are submitted for 38 element ICP analysis with aqua-regia digest. Quality control procedures include insertion of certified project standards at the drill site (1 in 30), field, crush and pulp duplicate samples (1 in 30 each), laboratory duplicates (1 in 30) and reagent blanks and reference material (1 in 30 each).

Data contained in this news release was validated and intersections calculated by John D. Kapusta, P. Geo, Vice-President Exploration and Geological Services, Chariot Resources Limited, the designated Qualified Person as defined in National Instrument 43-101.

Chariot Resources Limited (TSX:CHD - News) is developing its 70% owned Marcona Copper Property in Peru. With exceptional infrastructure, a significant resource and strong financial and commercial partners, the Mina Justa project is scheduled to be a mid-tier copper producer by 2009.

Additional details about Chariot can be viewed at the Company's website, www.chariotresources.com.

A Map of the Mina Justa project can be viewed on CCNMatthews' website at http://www.ccnmatthews.com/docs/char0823.pdf.

CHARIOT RESOURCES LIMITED.

Ulrich (Ulli) Rath

President & CEO