Standard Lithium Installs Commercial DLE Column at Demonstration Plant - Seite 2

Standard Lithium's Demonstration Plant is the only large-scale, continuously operating DLE plant in North America. Initially commissioned in May 2020, the Plant has processed over 16.4 million gallons (62 million litres) of Smackover brine.

“The long-term operation of our Demo Plant has been crucial in replicating and understanding the real-world dynamic conditions of continuous commercial-scale operations,” said Dr. Robinson. “With our partner Koch Technology Solutions, we have been able to tailor and optimise the multi-step flowsheet that will allow the Plant to be scaled for commercial production. The knowledge we have on-hand from over four years of operations, combined with an optimised flowsheet and now a commercial-scale DLE column, puts us in a strong position as we continue to advance our projects.”

Recent technical highlights of the Demo Plant and the existing LiPRO LSS (DLE) column are provided below.

Key Findings:

• Lithium Recovery Efficiency: As a recent weekly snapshot demonstrates (early March 2024), the LiPRO LSS (DLE) process achieved an average weekly lithium recovery of 95.9% from the continuous incoming brine flow.
• Element Rejection Rate: During the same period, the DLE process rejected, on average, over 99.3% of the key contaminants sodium, calcium, magnesium and potassium from the brine (i.e. less than 0.7% of those contaminants made it through the DLE into the first lithium chloride solution); and over 94.2% of boron was rejected.
• Operational Cycles: The LiPRO LSS (DLE) process has completed over 8,585 operational cycles.
• The LiPRO LSS column has been operating with negligible degradation or loss of the sorbent media, and brine pre-treatment has been optimized to allow for foulant-free operation of the DLE step.
• Brine Processed: As of the end of December 2023 (per Arkansas Oil and Gas Commission reporting), the Demo Plant had processed 16,418,408 gallons (62,143,674 litres) of Smackover brine, produced directly from the formation and reinjected continuously back into the same formation.
  

Dr. Robinson added: “One of the fundamental findings of the Demonstration Plant is the necessity of long-duration, on-site continuous processing of real brine. Our Demo Plant handles real Smackover brine directly from the resource, whereas in traditional small-scale, short-term off-site batch processes, brine is isolated, transported and often undergoes physical and chemical changes before testing. With the commercial-scale LSS column, we can continuously test real brine from the Smackover at a commercial level.”