Osisko Windfall Infill Drilling
Very Good - Seite 2
Lynx Zone
Mineralization typically occurs as grey to translucent quartz-carbonate-pyrite-tourmaline veins and pyrite replacement zones and stockworks. The vein-type is
associated with haloes of pervasive sericite-pyrite ± silica alteration and contain sulphides (predominantly pyrite with occasional minor amounts of chalcopyrite, sphalerite, galena, arsenopyrite,
and pyrrhotite) and local visible gold. Replacement mineralization is associated with strong pervasive silica-sericite-ankerite ± tourmaline alteration and contains disseminated pyrite from trace
to 80% with local visible gold. Pyrite stockworks can form envelopes that reach several tens of metres thick. Fuchsite alteration is common and is spatially constrained to near the gabbros.
Mineralization occurs at or near geological contacts between felsic porphyritic or fragmental intrusions and the host rhyolites or gabbros and locally can be hosted along the gabbro-rhyolite
contact.
Qualified Person
The scientific and technical content of this news release has been reviewed, prepared and approved by Mr. Louis Grenier, M.Sc.A., P.Geo. (OGQ 800), Project Manager of Osisko's Windfall Lake
gold project, who is a "qualified person" as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects ("NI 43-101").
Lesen Sie auch
Quality Control and Reporting Protocols
True width determination is estimated at 55-80% of the reported core length
interval for the zone. Assays are uncut except where indicated. Intercepts occur within geological confines of major
zones but have not been correlated to individual vein domains at this time. Reported intervals include minimum weighted averages of 3.0 g/t Au diluted over core lengths of at least 2.0 metres. All
NQ core assays reported were obtained by either 1-kilogram screen fire assay or standard 50-gram fire-assaying-AA finish or gravimetric finish at (i) ALS Laboratories in Val d'Or,
Québec, Thunder Bay, Ontario, Sudbury, Ontario or Vancouver, British Colombia, or (ii) Bureau Veritas in Timmins, Ontario. The 1-kilogram screen assay method is selected by the geologist when
samples contain coarse gold, present a higher percentage of pyrite than surrounding intervals or any samples exceeding 10 g/t Au. A 1-kilogram split is passed
through a 75-um stainless steel screen to separate the oversize fraction. Any +75-μm material remaining on the screen is retained and analyzed in its entirety by fire assay with
gravimetric finish and reported as the Au (+) fraction results. The 75μm fraction is homogenized and two 50-gram sub-samples are analyzed by fire assay with
Atomic absorption finish. The average of the two atomic absorption finish is taken and reported as the Au (-) fraction result. As of August 7, 2019, the -75μm
fractions have been analyzed using gravimetric finish. All three values are used in calculating the combined gold content of the plus and minus fractions. Selected samples are also
analyzed for multi-elements, including silver, using a four acids digestion -MS61 method at ALS Laboratories. Drill program design, Quality Assurance/Quality Control
("QA/QC") and interpretation of results is performed by qualified persons employing a
QA/QC program consistent with NI 43-101 and industry best practices. Standards and blanks are included with every 20 samples for QA/QC purposes by the Corporation as well as the lab.
Approximately 5% of sample pulps are sent to secondary laboratories for check assay.