Top Reboundchance New Cantech - 500 Beiträge pro Seite
eröffnet am 12.01.07 12:19:41 von
neuester Beitrag 24.05.07 22:53:31 von
neuester Beitrag 24.05.07 22:53:31 von
Beiträge: 61
ID: 1.104.797
ID: 1.104.797
Aufrufe heute: 0
Gesamt: 8.946
Gesamt: 8.946
Aktive User: 0
Top-Diskussionen
Titel | letzter Beitrag | Aufrufe |
---|---|---|
gestern 21:55 | 1030 | |
vor 1 Stunde | 593 | |
20.04.24, 12:11 | 487 | |
vor 1 Stunde | 475 | |
gestern 23:31 | 458 | |
gestern 21:35 | 451 | |
heute 05:12 | 411 | |
15.05.11, 11:34 | 369 |
Meistdiskutierte Wertpapiere
Platz | vorher | Wertpapier | Kurs | Perf. % | Anzahl | ||
---|---|---|---|---|---|---|---|
1. | 1. | 18.031,82 | +0,57 | 243 | |||
2. | 2. | 1,2000 | -13,04 | 98 | |||
3. | 3. | 0,1905 | +0,79 | 89 | |||
4. | 4. | 161,68 | +1,89 | 80 | |||
5. | 5. | 9,3750 | +1,41 | 75 | |||
6. | 6. | 6,9480 | -0,71 | 47 | |||
7. | 8. | 0,0160 | -24,17 | 38 | |||
8. | 7. | 22,210 | +0,73 | 37 |
Bei diesem Chartbild und der Kerze von gestern, sollte New Cantech heute mal rebounden. 1. Ziel sind 0,44 Euro
sollten wir da durchbrechen sind auch Kurse von 0,48 Euro möglich.
sollten wir da durchbrechen sind auch Kurse von 0,48 Euro möglich.
seit 2 Tagen schöne Käufe ...
überlege auch einzusteigen ... Pennybee .. deine letzten Tipps sind super gelaufen ... ich nehm ma ne Posi .. C7X wäre wirklich mal reif
ausserdem gibts auf der Firmenhompage ne News die noch nicht über die Ticker gelaufen ist ...
http://www.newcantech.com/s/PressReleases.asp?ReportID=16616…
überlege auch einzusteigen ... Pennybee .. deine letzten Tipps sind super gelaufen ... ich nehm ma ne Posi .. C7X wäre wirklich mal reif
ausserdem gibts auf der Firmenhompage ne News die noch nicht über die Ticker gelaufen ist ...
http://www.newcantech.com/s/PressReleases.asp?ReportID=16616…
hab mir gestern shcon ne posi geholt, da erste weisse kerze und ebend noch ne 38 posi ... sieht wirklich gut aus
Antwort auf Beitrag Nr.: 26.856.760 von blackheim am 12.01.07 12:22:06Die News habe ich noch gar nicht.
Habe nur auf den Chart geachtet. *rotwerd*
Habe nur auf den Chart geachtet. *rotwerd*
news ... kann die mal bitte einer reinstellen?
Hi, so jetzt wirds spannend un kann los laufn habe meinen einkaufswagen voll un steh nochmal an..!!!
Thu Jan 11, 2007
New Cantech Ventures Inc. Announces Plans for a 10,000 metre Phase 4 drilling program at it's Lucky Ship property -- Results received for next 254 metres of drilling in hole LS06-68 ("the deep hole")
Since June 2005 New Cantech Ventures Inc. ("Cantech") (TSXV:NCV, FSE:C7X), has completed 9,938 metres of NQ diamond drilling in 45 drill holes (LS06-24 to 68) on its Lucky Ship porphyry molybdenum property located 85 kilometres by road south of Houston, B.C. In support of a pre-feasibility analysis being conducted by A.C.A. Howe, Cantech has developed plans for an additional 10,000 metres of NQ diamond drilling in 31 drill holes. Including the 23 drill holes completed by Amax Exploration between 1964-1968, completion of the Phase 4 drilling program will bring the total number of drill holes on the property to 100. The objectives of the Phase 4 drilling program are:
(a) Move that part of the Lucky Ship deposit that is within 300 metres of the surface from the current indicated to the measured resource category. This is required for financing purposes; and
(b) Determine the ultimate vertical extent of the deposit which is still open at depth. This information is required to determine the size and grade of the resource that is below the limits of open pit mining and could potentially be mined by underground methods.
Specifications for this proposed drilling program have been drafted and Cantech is currently requesting bids from drilling contractors to complete the proposed drilling program.
Status of the Deep Hole
Cantech has just received results for the next 251.7 metres of hole LS06-68, the "deep hole". This drilling was done between mid November and mid December, before the drilling contractor shut down for Christmas. This hole is being drilled at azimuth 325 degrees and inclination -87 degrees and is targeting a zone of molybdenum mineralization that was encountered in hole LS06-61 and two previous Amax drill holes, LS65-12 and LS65-16. The hole was at 519 metres at the time of shut down. If hole LS06-68 goes to its target depth it will test the deposit to a depth of approximately 1100 metres below surface. The hole was collared along the northern edge of the deposit and the upper part of the hole was not expected to intersect significant molybdenum mineralization. Sporadic intersections have bee encountered and these are summarized below. Note that the interval from 39-79 metres was reported in a previous news release and is included in the table below for completeness. It is anticipated that drilling will resume within a few days of this release.
Hole
Number
Easting
Northing
Elev.
(metres)
Azi-
muth
Dip
Length
(metres)
Start
(m.)
End
(m.)
Length (m.) @ Grade %Mo
LS06-68
599586
5987331
1139
325
-87
519
39
79
40.0 @ 0.075
267.3
377
109.7 @ 0.051
including
353
359
6.0 @ 0.229
Note: hole stopped at 519 metres for Christmas break.
Qualified Person
Dr. Donald G. MacIntyre, P.Eng., a qualified person under National Instrument 43-101, has been supervising Cantech's 2006 Phase 3 Drill Program and has reviewed and approved the technical disclosure in this news release.
For more information please contact Dalton B. DuPasquier, President & CEO of New Cantech Ventures Inc., at (604) 541-7288 or visit Cantech's website at http://www.newcantech.com.
ON BEHALF OF THE BOARD OF DIRECTORS
"Dalton DuPasquier"
NEW CANTECH VENTURES INC.
The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of the content of the information contained herein.
New Cantech Ventures Inc. Announces Plans for a 10,000 metre Phase 4 drilling program at it's Lucky Ship property -- Results received for next 254 metres of drilling in hole LS06-68 ("the deep hole")
Since June 2005 New Cantech Ventures Inc. ("Cantech") (TSXV:NCV, FSE:C7X), has completed 9,938 metres of NQ diamond drilling in 45 drill holes (LS06-24 to 68) on its Lucky Ship porphyry molybdenum property located 85 kilometres by road south of Houston, B.C. In support of a pre-feasibility analysis being conducted by A.C.A. Howe, Cantech has developed plans for an additional 10,000 metres of NQ diamond drilling in 31 drill holes. Including the 23 drill holes completed by Amax Exploration between 1964-1968, completion of the Phase 4 drilling program will bring the total number of drill holes on the property to 100. The objectives of the Phase 4 drilling program are:
(a) Move that part of the Lucky Ship deposit that is within 300 metres of the surface from the current indicated to the measured resource category. This is required for financing purposes; and
(b) Determine the ultimate vertical extent of the deposit which is still open at depth. This information is required to determine the size and grade of the resource that is below the limits of open pit mining and could potentially be mined by underground methods.
Specifications for this proposed drilling program have been drafted and Cantech is currently requesting bids from drilling contractors to complete the proposed drilling program.
Status of the Deep Hole
Cantech has just received results for the next 251.7 metres of hole LS06-68, the "deep hole". This drilling was done between mid November and mid December, before the drilling contractor shut down for Christmas. This hole is being drilled at azimuth 325 degrees and inclination -87 degrees and is targeting a zone of molybdenum mineralization that was encountered in hole LS06-61 and two previous Amax drill holes, LS65-12 and LS65-16. The hole was at 519 metres at the time of shut down. If hole LS06-68 goes to its target depth it will test the deposit to a depth of approximately 1100 metres below surface. The hole was collared along the northern edge of the deposit and the upper part of the hole was not expected to intersect significant molybdenum mineralization. Sporadic intersections have bee encountered and these are summarized below. Note that the interval from 39-79 metres was reported in a previous news release and is included in the table below for completeness. It is anticipated that drilling will resume within a few days of this release.
Hole
Number
Easting
Northing
Elev.
(metres)
Azi-
muth
Dip
Length
(metres)
Start
(m.)
End
(m.)
Length (m.) @ Grade %Mo
LS06-68
599586
5987331
1139
325
-87
519
39
79
40.0 @ 0.075
267.3
377
109.7 @ 0.051
including
353
359
6.0 @ 0.229
Note: hole stopped at 519 metres for Christmas break.
Qualified Person
Dr. Donald G. MacIntyre, P.Eng., a qualified person under National Instrument 43-101, has been supervising Cantech's 2006 Phase 3 Drill Program and has reviewed and approved the technical disclosure in this news release.
For more information please contact Dalton B. DuPasquier, President & CEO of New Cantech Ventures Inc., at (604) 541-7288 or visit Cantech's website at http://www.newcantech.com.
ON BEHALF OF THE BOARD OF DIRECTORS
"Dalton DuPasquier"
NEW CANTECH VENTURES INC.
The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of the content of the information contained herein.
Thu Jan 11, 2007
New Cantech Ventures Inc. Announces Plans for a 10,000 metre Phase 4 drilling program at it's Lucky Ship property -- Results received for next 254 metres of drilling in hole LS06-68 ("the deep hole")
--------------------------------------------------------------------------------
Since June 2005 New Cantech Ventures Inc. ("Cantech") (TSXV:NCV, FSE:C7X), has completed 9,938 metres of NQ diamond drilling in 45 drill holes (LS06-24 to 68) on its Lucky Ship porphyry molybdenum property located 85 kilometres by road south of Houston, B.C. In support of a pre-feasibility analysis being conducted by A.C.A. Howe, Cantech has developed plans for an additional 10,000 metres of NQ diamond drilling in 31 drill holes. Including the 23 drill holes completed by Amax Exploration between 1964-1968, completion of the Phase 4 drilling program will bring the total number of drill holes on the property to 100. The objectives of the Phase 4 drilling program are:
(a) Move that part of the Lucky Ship deposit that is within 300 metres of the surface from the current indicated to the measured resource category. This is required for financing purposes; and
(b) Determine the ultimate vertical extent of the deposit which is still open at depth. This information is required to determine the size and grade of the resource that is below the limits of open pit mining and could potentially be mined by underground methods.
Specifications for this proposed drilling program have been drafted and Cantech is currently requesting bids from drilling contractors to complete the proposed drilling program.
Status of the Deep Hole
Cantech has just received results for the next 251.7 metres of hole LS06-68, the "deep hole". This drilling was done between mid November and mid December, before the drilling contractor shut down for Christmas. This hole is being drilled at azimuth 325 degrees and inclination -87 degrees and is targeting a zone of molybdenum mineralization that was encountered in hole LS06-61 and two previous Amax drill holes, LS65-12 and LS65-16. The hole was at 519 metres at the time of shut down. If hole LS06-68 goes to its target depth it will test the deposit to a depth of approximately 1100 metres below surface. The hole was collared along the northern edge of the deposit and the upper part of the hole was not expected to intersect significant molybdenum mineralization. Sporadic intersections have bee encountered and these are summarized below. Note that the interval from 39-79 metres was reported in a previous news release and is included in the table below for completeness. It is anticipated that drilling will resume within a few days of this release.
Hole
Number
Easting
Northing
Elev.
(metres)
Azi-
muth
Dip
Length
(metres)
Start
(m.)
End
(m.)
Length (m.) @ Grade %Mo
LS06-68
599586
5987331
1139
325
-87
519
39
79
40.0 @ 0.075
267.3
377
109.7 @ 0.051
including
353
359
6.0 @ 0.229
Note: hole stopped at 519 metres for Christmas break.
Qualified Person
Dr. Donald G. MacIntyre, P.Eng., a qualified person under National Instrument 43-101, has been supervising Cantech's 2006 Phase 3 Drill Program and has reviewed and approved the technical disclosure in this news release.
For more information please contact Dalton B. DuPasquier, President & CEO of New Cantech Ventures Inc., at (604) 541-7288 or visit Cantech's website at http://www.newcantech.com.
New Cantech Ventures Inc. Announces Plans for a 10,000 metre Phase 4 drilling program at it's Lucky Ship property -- Results received for next 254 metres of drilling in hole LS06-68 ("the deep hole")
--------------------------------------------------------------------------------
Since June 2005 New Cantech Ventures Inc. ("Cantech") (TSXV:NCV, FSE:C7X), has completed 9,938 metres of NQ diamond drilling in 45 drill holes (LS06-24 to 68) on its Lucky Ship porphyry molybdenum property located 85 kilometres by road south of Houston, B.C. In support of a pre-feasibility analysis being conducted by A.C.A. Howe, Cantech has developed plans for an additional 10,000 metres of NQ diamond drilling in 31 drill holes. Including the 23 drill holes completed by Amax Exploration between 1964-1968, completion of the Phase 4 drilling program will bring the total number of drill holes on the property to 100. The objectives of the Phase 4 drilling program are:
(a) Move that part of the Lucky Ship deposit that is within 300 metres of the surface from the current indicated to the measured resource category. This is required for financing purposes; and
(b) Determine the ultimate vertical extent of the deposit which is still open at depth. This information is required to determine the size and grade of the resource that is below the limits of open pit mining and could potentially be mined by underground methods.
Specifications for this proposed drilling program have been drafted and Cantech is currently requesting bids from drilling contractors to complete the proposed drilling program.
Status of the Deep Hole
Cantech has just received results for the next 251.7 metres of hole LS06-68, the "deep hole". This drilling was done between mid November and mid December, before the drilling contractor shut down for Christmas. This hole is being drilled at azimuth 325 degrees and inclination -87 degrees and is targeting a zone of molybdenum mineralization that was encountered in hole LS06-61 and two previous Amax drill holes, LS65-12 and LS65-16. The hole was at 519 metres at the time of shut down. If hole LS06-68 goes to its target depth it will test the deposit to a depth of approximately 1100 metres below surface. The hole was collared along the northern edge of the deposit and the upper part of the hole was not expected to intersect significant molybdenum mineralization. Sporadic intersections have bee encountered and these are summarized below. Note that the interval from 39-79 metres was reported in a previous news release and is included in the table below for completeness. It is anticipated that drilling will resume within a few days of this release.
Hole
Number
Easting
Northing
Elev.
(metres)
Azi-
muth
Dip
Length
(metres)
Start
(m.)
End
(m.)
Length (m.) @ Grade %Mo
LS06-68
599586
5987331
1139
325
-87
519
39
79
40.0 @ 0.075
267.3
377
109.7 @ 0.051
including
353
359
6.0 @ 0.229
Note: hole stopped at 519 metres for Christmas break.
Qualified Person
Dr. Donald G. MacIntyre, P.Eng., a qualified person under National Instrument 43-101, has been supervising Cantech's 2006 Phase 3 Drill Program and has reviewed and approved the technical disclosure in this news release.
For more information please contact Dalton B. DuPasquier, President & CEO of New Cantech Ventures Inc., at (604) 541-7288 or visit Cantech's website at http://www.newcantech.com.
Bin mal eingestiegen.
Gruß SGDfigther
Gruß SGDfigther
Über die Mittagszeit jetzt noch die 0,40 weg und dann sollse los. zackig.
Die 0,44 will ich heute bei Zeiten sehen
Die 0,44 will ich heute bei Zeiten sehen
0,40 ging ja schneller als ich dachte
Interesse im Bid wächst auch
Interesse im Bid wächst auch
Los jetzt C7X, Backen zusammen und dann 0,41 und 0,42, dann ist der Weg frei
Antwort auf Beitrag Nr.: 26.857.173 von PennyBee am 12.01.07 12:41:020,40 EUR 12:43:23 5.700
0,40 EUR 12:40:00 10.700
0,39 EUR 12:36:22 19.650
0,39 EUR 12:33:11 11.000
0,39 EUR 12:25:56 27.900
Gruß SGDfigther
0,40 EUR 12:40:00 10.700
0,39 EUR 12:36:22 19.650
0,39 EUR 12:33:11 11.000
0,39 EUR 12:25:56 27.900
Gruß SGDfigther
Antwort auf Beitrag Nr.: 26.857.295 von SGDfigther am 12.01.07 12:45:41Brief: 0,410 EUR
Geld: 0,39 EUR
Eröffnung: 0,38 EUR
Tageshoch: 0,40 EUR
Tagestief: 0,37 EUR
Handelsvolumen: 85.043 EUR
Gehandelte Stücke: 220.950
Gruß SGDfigther
Geld: 0,39 EUR
Eröffnung: 0,38 EUR
Tageshoch: 0,40 EUR
Tagestief: 0,37 EUR
Handelsvolumen: 85.043 EUR
Gehandelte Stücke: 220.950
Gruß SGDfigther
Da gehen gute Stücken auf 0,40, nu aber mal 0,41 hophop
Zwischendurch WO platt
Zwischendurch WO platt
Wo kommt denn jetzt die Size her? 50k jeweils im Bid und Ask
dafür aber Taxen jetzt 40//41
dafür aber Taxen jetzt 40//41
sehr schön 0,41 mit fetten Stücken
Was geht denn da ab? schon wieder 50k gekauft zu 0,41
Irgendwie habe ich das Gefühl wir haben hier schlafende Hunde geweckt.
Irgendjemandem sind wir glaube auf die Füße getreten. Hm
Irgendjemandem sind wir glaube auf die Füße getreten. Hm
Antwort auf Beitrag Nr.: 26.858.522 von PennyBee am 12.01.07 13:45:47Na dann lass den Wecker mal weiter klingeln ...
160k Aktien auf 0,41 gelaufen
da muß doch bald mal Schluß sein
da muß doch bald mal Schluß sein
200k nun auf 0,41 umgesetzt, jetzt reichts aber
was meint ihr sind die 0,50 bis ende nächster woche drin ??
Antwort auf Beitrag Nr.: 26.859.974 von Sleeples am 12.01.07 14:51:47Ich will nicht "nein" sagen, aber das Ziel ist schon noch bissl hin.
Vorher sind schon noch ein paar charttechnische Hürden zu nehmen.
Erstmal muß die 0,44 geknackt werden.
Vorher sind schon noch ein paar charttechnische Hürden zu nehmen.
Erstmal muß die 0,44 geknackt werden.
Antwort auf Beitrag Nr.: 26.860.069 von PennyBee am 12.01.07 14:55:06ich hoff es war kein fehler hab mir vorhin grad 40k zugelegt.
Die Crosser haben ihre Trades gemacht, jetzt wirds spannend
Antwort auf Beitrag Nr.: 26.860.104 von Sleeples am 12.01.07 14:56:250,42 im Kurs, na wurde ja auch Zeit
Taxen jetzt 0,41 zu 0,43
Taxen jetzt 0,41 zu 0,43
na schau ma mal ob wir die 0,40 halten können oder ob es wieder runter sackt
Antwort auf Beitrag Nr.: 26.929.391 von Sleeples am 15.01.07 09:39:49erstmal siehts ja gut aus 0,41 zu 0,43 im Moment
zu schnell darf es auch nicht richtung norden gehen, sonst werden nur wieder die trader bedient, sieht alles ganz gut aus, wenn wir erst einmal über 0,46 kommen dann ist viel luft nach oben, bis dahin entspannt zurücklehnen es sei denn mann tradet
sieht immer besser aus
Taxen nun 0,42 zu 0,44 und 0,43 im Kurs mit guten Stücken
Taxen nun 0,42 zu 0,44 und 0,43 im Kurs mit guten Stücken
und wieder TH mit 0,44
wenn es dabei bleibt, können wir uns auf die nächsten Tage freuen
wenn es dabei bleibt, können wir uns auf die nächsten Tage freuen
Antwort auf Beitrag Nr.: 26.856.716 von PennyBee am 12.01.07 12:19:41
Antwort auf Beitrag Nr.: 26.856.716 von PennyBee am 12.01.07 12:19:41Ab hier werden es die Bären sehr schwer haben. Ich denke, wir sehen jetzt wieder grüne Vorzeichen.
Antwort auf Beitrag Nr.: 26.980.404 von SharpRatio am 17.01.07 13:11:410,57 im Hoch
Recht haste alle meine Verkaufsorders wurden ausgeführt
Gratulation an alle die dabei waren kann ich nur sagen.
Recht haste alle meine Verkaufsorders wurden ausgeführt
Gratulation an alle die dabei waren kann ich nur sagen.
Heute sollte mal wieder der C7X-Rebound starten.
Zielsetzung für heute ist der Bereich um 40 cent
Zielsetzung für heute ist der Bereich um 40 cent
Das Volumen sieht schonmal ganz nett aus
Bei 0,358 wären wir Pari.
Sollten wir die 0,40 hier knacken sind evtl auch 0,50 machbar.
ABER, erstmal die 0,40 packen
Sollten wir die 0,40 hier knacken sind evtl auch 0,50 machbar.
ABER, erstmal die 0,40 packen
0,352 TH in STU mit 23k gekauft
Hier wird versucht sich über Nebenbörsen einzudecken
Hier wird versucht sich über Nebenbörsen einzudecken
Schlafen hier noch alle?
Es kommt jetzt size ins Geld
Es kommt jetzt size ins Geld
warum wird hier über FRA-ASK auf den Nebenplätzen gekauft?
gerade in München 3k zu 0,356
gerade in München 3k zu 0,356
Na endlich, neue THs in Fra 0,354
mir eigentlich ziemlich egal was die ahnungslosen bb lemminge in dem
anderen thread so von sich lassen ich. reit jetzt schon zum 2ten mal ncv
und bin schon wieder im plus.
denk mir mal die 4 oder 5 werden wir schnell wieder hinter dem komma sehn
anderen thread so von sich lassen ich. reit jetzt schon zum 2ten mal ncv
und bin schon wieder im plus.
denk mir mal die 4 oder 5 werden wir schnell wieder hinter dem komma sehn
nun gehen echte Leckerpakete um
0,36 im Geld
0,36 im Geld
Antwort auf Beitrag Nr.: 29.368.236 von PennyBee am 18.05.07 10:14:56drüben haben die o.5 ja auch gehalten die tage.....
denke die werden nachziehn und die 0.6 wieder in
angriff nehmen
denke die werden nachziehn und die 0.6 wieder in
angriff nehmen
ask jetzt bei 0,364
TH mit 20k auf 0,363
Antwort auf Beitrag Nr.: 29.368.295 von superroth am 18.05.07 10:18:160,365
nicht zu verachten auch das volumen nach etwas mehr als 2 std.
Antwort auf Beitrag Nr.: 29.368.357 von superroth am 18.05.07 10:21:13ups,
ich bin ja schon über 20% im plus
innerhalb weniger tage.
was geht hier heute
sind die auf ne ölquelle gestoßen
ich bin ja schon über 20% im plus
innerhalb weniger tage.
was geht hier heute
sind die auf ne ölquelle gestoßen
0,385
0,389
was eine schlagzahl
was eine schlagzahl
Antwort auf Beitrag Nr.: 29.429.655 von superroth am 23.05.07 09:34:08StammdatenWKN
121407
ISIN
CA6431661017
Letzte Kurse Zeit Kurs Volumen
10:19:55 0,387 31600
10:18:45 0,386 8500
10:18:29 0,385 8000
10:17:39 0,385 3000
10:15:32 0,385 7000
10:09:41 0,383 6000
10:05:26 0,383 15000
10:02:34 0,383 3000
09:57:47 0,384 3000
09:54:26 0,384 11500
121407
ISIN
CA6431661017
Letzte Kurse Zeit Kurs Volumen
10:19:55 0,387 31600
10:18:45 0,386 8500
10:18:29 0,385 8000
10:17:39 0,385 3000
10:15:32 0,385 7000
10:09:41 0,383 6000
10:05:26 0,383 15000
10:02:34 0,383 3000
09:57:47 0,384 3000
09:54:26 0,384 11500
Antwort auf Beitrag Nr.: 29.430.488 von Spitzenrolli am 23.05.07 10:21:16geht ja ab wie fußpilz
da ist ordentlich druck im euter
da ist ordentlich druck im euter
Antwort auf Beitrag Nr.: 29.431.095 von superroth am 23.05.07 10:56:10MACD kurz vor einem Kaufsignal, dann brennt hier die Hütte!
Wie ist es zu erklären, das in Canada 9% im Minus und bei uns 12% im plus?
Antwort auf Beitrag Nr.: 29.434.251 von ramtto2 am 23.05.07 13:55:58Für sowas gibt es keine erklärung ist einfach unerklärlich
Antwort auf Beitrag Nr.: 29.434.251 von ramtto2 am 23.05.07 13:55:58Währungsschwankungen und kurzfristige Erwartungen spielen eine Rolle. Jeder muß für sich die Entscheidung treffen, ob er eine Aktie für kurzfristige Tradingchancen/-risiken kauft oder eine mittel- bis langfristige Investmententscheidung trifft. Bei letzterem kann man "Papierverluste" auch aussitzen.
Antwort auf Beitrag Nr.: 29.445.825 von scareface am 24.05.07 09:11:43Beispiel zu den Einflußgrößen Auslands- und Inlandsbörse:
Kursdaten 23.05.2007 Canadian Exchange
Kurs:
23:05:24 0,580 +16,00%
+0,080
Taxe Stück
Bid: 22:00:21 0,550 20
Ask: 22:07:41 0,580 65
CAN Dollar: 1,4566
Umrechnung: 0,58 C$ / 1,4566 = 0,398 Euro
Quelle: Finanztreff
Profis wissen das selbstverständlich !
Kursdaten 23.05.2007 Canadian Exchange
Kurs:
23:05:24 0,580 +16,00%
+0,080
Taxe Stück
Bid: 22:00:21 0,550 20
Ask: 22:07:41 0,580 65
CAN Dollar: 1,4566
Umrechnung: 0,58 C$ / 1,4566 = 0,398 Euro
Quelle: Finanztreff
Profis wissen das selbstverständlich !
Tue May 22, 2007
Closing Of Option Agreement To Acquire 100% Interest In Moly King Property Previously Announced On April 2, 2007
New Cantech Ventures Inc. ("Cantech") (TSXV:NCV, FSE:C7X), is pleased to announce that on May 22, 2007 the TSX Venture Exchange approved an option and royalty agreement with John Bot whereby Cantech can acquire a 100% interest in the Moly King Property.
The Moly King Property consists of one mineral claim (Tenure No. 552173) and is located approximately nine kilometres east-southeast of the centre of Cantech's Lucky Ship porphyry molybdenum deposit. The Moly King property is surrounded by claims that comprise the Lucky Ship property as shown on figure 2 of Dr. N.C. Carter's National Instrument 43-101 Technical Report on the Lucky Ship property dated January 23, 2007 and filed on the SEDAR.com website.
The Moly King claim is located within an area explored by Falconbridge Nickel Mines back in 1969. Falconbridge carried out a limited exploration program of mapping and geochemical surveying (B.C. Assessment Report 1809). There are very few outcrops on the property.
According to the B.C. Ministry of Energy, Mines and Petroleum Resources MapPlace website the Moly King claim covers MINFILE showing No. 093L 052 -- (King, Queen, Jack, P.I., Squeek). According to MINFILE the showing is comprised of an intrusion of silicified quartz diorite to quartz monzonite that hosts disseminated and fracture controlled molybdenite, chalcopyrite, pyrite and arsenopyrite. A breccia zone is also reported to host arsenopyrite, pyrite and pyrrhotite. Both the medium-grained quartz monzonite matrix and dark angular fragments in the breccia are reported to contain disseminated sulphides.
Falconbridge's geochemical work in 1968 outlined an irregular zone of anomalous Cu and Mo in soils over an area of roughly 1,500 by 2,000 feet. This anomaly, plus showings in creeks cutting through the anomaly present an attractive target and Cantech is developing a plan to test this area during its current exploration program on the Lucky Ship property.
Under the terms of the option agreement with John Bot, Cantech has an option to acquire a 100% interest in the property exercisable by (a) paying $200,000 over a three year period of which $10,000 is payable within 5 business days of the TSX Venture approval date, and (b) issuing and delivering 175,000 shares of Cantech over a three year period of which 25,000 shares are to be issued within 5 business days of the TSX Venture Exchange approval date. The Moly King Property is subject to a 2% NSR Royalty. Cantech has the right to purchase up to 100% of the NSR for a total of $1 Million.
All shares issued under the terms of the option agreement will be subject to a hold period expiring four months from the date of issuance. The 25,000 shares that have been issued today may not be traded until September 23, 2007.
Qualified Person
Dr. Donald G. MacIntyre, P.Eng., a qualified person under National Instrument 43-101, is supervising Cantech's 2007 program on the Lucky Ship Property and will be supervising Cantech's 2007 program on the Moly King Property. Dr. MacIntyre has reviewed and approved the technical disclosure in this news release.
For more information please contact Dalton B. DuPasquier, President & CEO of New Cantech Ventures Inc., at (604) 541-7288 or visit Cantech's website at http://www.newcantech.com.
ON BEHALF OF THE BOARD OF DIRECTORS
"Dalton B. DuPasquier"
Beitrag zu dieser Diskussion schreiben
Zu dieser Diskussion können keine Beiträge mehr verfasst werden, da der letzte Beitrag vor mehr als zwei Jahren verfasst wurde und die Diskussion daraufhin archiviert wurde.
Bitte wenden Sie sich an feedback@wallstreet-online.de und erfragen Sie die Reaktivierung der Diskussion oder starten Sie eine neue Diskussion.
Meistdiskutiert
Wertpapier | Beiträge | |
---|---|---|
243 | ||
98 | ||
89 | ||
80 | ||
75 | ||
47 | ||
38 | ||
37 | ||
34 | ||
33 |
Wertpapier | Beiträge | |
---|---|---|
31 | ||
30 | ||
27 | ||
24 | ||
23 | ||
22 | ||
21 | ||
20 | ||
19 | ||
19 |