Aurelian Discovers New Gold Area on its Condor Project - 500 Beiträge pro Seite

[AXINO_AG [IR/PR]]

Mehr Infos zum Unternehmen unter http://goldinvest.de/public/company_mine_index.asp?l=1&n=4&a… (zum Teil auch in Deutsch)

Aurelian Resources Inc. (TSX VENTURE:ARU) is pleased to announce the discovery of a new gold area in close proximity to Aurelian`s Bonza-Las Penas gold-silver deposit.

The El Tigre gold anomaly has yielded values in stream sediments of up to 40.4 ppm and abundant gold in the pan. http://www.aurelian.ca/media/press/eltigrepress.jpg" target="_blank" rel="nofollow ugc noopener">http://www.aurelian.ca/media/press/eltigrepress.jpg The anomaly is a minimum of 300 x 400 metres in size and defined by soil geochemistry and stream sediments. It is surrounded by a broader zone of anomalous silver, arsenic, copper, and zinc in soils. Panning at the headwater sources of several very small streams has yielded abundant gold grains up to 4 millimetres in size. Several pan concentrates yielded in excess of 100 gold grains. The grains are irregularly shaped and hackly and do not show evidence of rounding. Such grains are typically indicators of proximity to source.

There are limited rock outcrops within the area of the anomaly and it is planned to further investigate it with further follow-up sampling and pitting. Magnetic and IP surveys are also planned. The El Tigre anomaly is only four kilometers east of the Bonza-Las Penas gold-silver deposit. The Technical Report authored by Micon International Ltd., concerning Bonza-Las Penas, which presents a resource estimate of 517,000 oz gold and 5,605,500 oz silver was filed on http://www.sedar.com/ on January 14th, 2005 and is available for download.

The El Tigre anomaly is in an entirely virgin area that is untouched by artesanal miners. It was discovered through follow-up of 2 anomalous samples collected in spring 2004 in Aurelian`s regional stream sediment reconnaissance programme.

Stream sediment reconnaissance has been completed on approximately one third of Aurelian`s holdings of 95,000 hectares, most of which have never been geologically explored. Four sampling teams are currently active. The Cordillera del Condor is a well-recognized gold and copper mineral belt containing one producing gold-silver mine and a copper deposit currently in feasibility. Aurelian routinely analyzes all samples for gold, silver, copper, and other metals. This programme has generated 28 gold and gold-copper anomalies for immediate follow-up.

Dr. Hendrik Schloemann (Pr. Sc. Nat. South Africa) heads up Aurelian`s regional programme and is acting as Qualified Person in compliance with National Instrument 43-101 with respect to this release. He has reviewed the contents for accuracy.

Forward Looking Statements

This Press Release contains certain forward looking statements, except for historical information. These statements involve known and unknown risks, uncertainties, and other factors that may cause the Company`s actual results, levels of activity, performance, and/or achievements to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by these forward looking statements.

About Aurelian

Aurelian Resources Inc. is a publicly-listed (TSX VENTURE:ARU - News) junior resource company engaged in the business of exploring for, with the ultimate goal of developing and producing, precious and/or base metals from its properties located in southeastern Ecuador. The Company`s current focus is in the large Condor Gold Project which consists of 38 mining concessions totaling approximately 95,000 hectares.


--------------------------------------------------------------------------------
Contact:

Aurelian Resources Inc.
Patrick Anderson
President
Phone: [phone]
Fax: [phone]
[e-mail]
http://www.aurelian.ca/

THE TSX VENTURE EXCHANGE HAS NOT REVIEWED AND DOES NOT ACCEPT RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.

[Buddah]

wo ist der Boden???

mfg B.

[Der_Goldmann]

Offenbar war der Boden bei 0,41.

Und offenbar gibt es einen Aufwärtstrend über den 3-Monats-Zeitraum.

Gruß

[Jannik04]

oioi die geht heute ganz schön ab in can.....


Aurelian cuts 4.14 g/t Au over 237.25 m at Condor


2006-04-05 11:04 ET - News Release

Mr. Patrick Anderson reports

AURELIAN INTERSECTS 237 METRES AVERAGING 4.14 G/T OF GOLD AND 60 METRES AVERAGING 3.42 G/T IN INITIAL DRILL PROGRAM AT THE NEW FDN EPITHERMAL GOLD-SILVER DISCOVERY

Aurelian Resources Inc. has cut a 237.25-metre intercept, grading 4.14 grams per tonne of gold, and a 60-metre intercept, grading 3.42 g/t of gold, at its wholly owned Condor project in southeastern Ecuador. These results are from two of six holes completed at the FDN blind epithermal gold-silver discovery. Results have been received for four holes. The intersections are approximately one kilometre north of the Bonza-Las Penas (B-LP) epithermal gold-silver deposit (see Stockwatch news dated Dec. 14, 2004) and are interpreted to be the northern continuation of that system, which has now been mapped for over three kilometres. To date, there has been no drilling between the current program at FDN and the B-LP deposit.

"With this discovery, we have added more than a kilometre of strike length to the B-LP deposit that we targeted and drilled in 2004 and 2005," says Aurelian president and chief executive officer, Patrick F.N. Anderson. "The first two holes of the program aided us in modelling the geometry of the system and the second two holes have proven the existence of an extensive mineralized system with grade at depth. The intensity of the mineralization at FDN is an order of magnitude stronger than we see at B-LP."

Mr. Anderson said the two holes that intercepted grade are separated by a strike length of over 90 metres and both are open at depth. "The drill is currently working to complete the final four holes of the program. These results will be released when they are received. Given the strength of the numbers reported so far, we are working to develop a drill program that will identify a resource on this new discovery."

Results are summarized in the tables below. As drill hole CP-06-51 includes a significant number of high-grade assays, this hole has been recalculated using a top cut of 31.1 grams per ton Au. All drill holes have an azimuth of 90 degrees and dip between 45 degrees and 75 degrees. Locations are displayed in map and cross-section at Aurelian's website. A complete list of results may be viewed at Aurelian's website.


UNCUT DATA

Drill From To Int. Au Ag
hole m m m g/t g/t

CP-06-49 23.00 25.00 2.00 0.61 2.4
CP-06-49 47.00 49.00 2.00 1.23 1.6
CP-06-49 74.00 76.00 2.00 1.20 1.1
CP-06-49 140.70 141.00 0.30 0.52 3.8
CP-06-50 70.00 71.00 1.00 0.60 0.9
CP-06-50 77.80 78.05 0.25 1.55 18.8
CP-06-50 202.50 203.50 1.00 0.69 1.7
CP-06-50 218.00 222.00 4.00 0.63 8.7
CP-06-50 305.00 307.50 2.50 1.15 3.3
CP-06-51 192.45 429.70 237.25 4.14 8.5
incl. 199.45 240.90 41.45 9.06 10.4
incl. 211.35 212.35 1.00 52.4 26.2
incl. 221.30 222.10 0.80 31.0 24.5
incl. 234.90 235.90 1.00 80.3 25.6
incl. 303.70 325.80 22.10 15.58 6.1
incl. 303.70 305.15 1.45 175.0 40.0
incl. 317.10 317.80 0.70 51.4 20.9
incl. 370.00 371.00 1.00 35.3 27.1
CP-06-52 214.80 215.80 1.00 0.64 1.2
CP-06-52 279.90 340.15 60.25 3.42 3.3
incl. 280.90 320.40 39.50 4.35 3.8


Note

Intervals are calculated using a lower cut of 0.5 g/t Au and no top cut. They include a maximum of five-metre internal waste.



CP-06-51 WITH A TOP CUT OF 31.1 G/T AU

Drill From To Int. Au Ag
hole m m m g/t g/t

CP-06-51 192.45 429.70 237.25 2.89 8.5
incl. 199.45 240.90 41.45 7.36 10.4
incl. 303.70 325.80 22.10 5.50 6.1


Note

Intervals are calculated using a lower cut of 0.5 g/t Au and a top cut of 31.1 g/t Au, which include a maximum of five-metre internal waste.

The first four drill holes of the current program targeted two zones at FDN. The first (CP-06-49) tested a strong IP anomaly originally thought to be the northern extent of the system. The other three drill holes (CP-06-50, 51 and 52) aimed to intersect at depth, a zone of epithermal quartz replacement in conglomerate found in outcrop. The conglomerate is interpreted as infill of a large pull-apart basin (two kilometres by seven kilometres), almost all of which is within Aurelian concessions. Pull-apart basins are a structural environment ideal for the formation of epithermal gold mineralization. The majority of the epithermal mineralization associated with this basin is now interpreted to predate the conglomerate. This indicates that most of the epithermal gold-silver mineralization is buried by the conglomerate.

Drill hole CP-06-49 intersected a weakly mineralized (24 m at 0.22 g/t Au and eight metres at 0.49 g/t Au) hydrothermal breccia and weak widely spaced epithermal stockwork veining. Although the assays were low grade, the hole confirmed that epithermal mineralizing fluids had circulated in the area. The drill rig was then moved 250 m to the west, to test the volcanics below the conglomerate. Drill hole CP-06-50 intersected a zone of weak epithermal mineralization within the conglomerate (28.05 m at 0.18 g/t Au) before intersecting 20 m of buried quartz sinter, the surface expression of epithermal mineralization and the first indication that a significant epithermal system lay buried below the conglomerate. The hole also intersected a broad zone of hydrothermal breccia in the underlying andesitic volcanics. The mineralization returned low gold values (63.6 m at 0.16 g/t Au and 26.50 m at 0.24 g/t Au), with the geochemistry indicating the mineralization is high in the epithermal system.

As the main epithermal system was interpreted to lie farther west and at deeper levels. The next drill hole (CP-06-51) was drilled with a steeper dip from the same drill platform. At 192.45 m, silicified conglomerate was intersected and, at 199.45 m, a zone of intense epithermal quartz stockwork veining and brecciation in silicified volcanics. Visible gold has been observed within a number of the stockwork veins. The drill hole stayed within mineralization to 429.70 m (237.25 m at 4.14 g/t Au and 8.5 g/t Ag, including 41.45 m at 9.06 g/t Au and 22.10 m at 15.58 g/t Au). Certain significantly sized high-grade banded quartz-rhodochrosite-sulphide veins with visible gold were also intersected (1.45 m at 175 g/t Au and 40.0 g/t Ag, true width is estimated at 80 centimetres and 70 cm at 51.4 g/t Au and 20.9 g/t Ag, true width estimated at 65 cm). The hole ended at 432.5 m, with anomalous gold (0.34 g/t) and silver (6.5 g/t) at the end of the hole.

Drill hole CP-06-52 was drilled 92 m west and 89 m south of holes CP-06-50 and 51. The hole also intersected very intense epithermal stockwork veining and brecciation, and assays 60.25 m at 3.42 g/t Au and 3.3 g/t Ag over the entire volcanic interval. Unfortunately, the drill hole was lost due to a collapse higher up the hole before the hole could test the entire system. The hole ended in epithermal stockwork and breccia mineralization in silicified volcanics.

As both holes CP-06-51 and CP-06-52 ended in mineralization, a true width of the zone cannot be accurately determined at this time.

Assay results are pending for the latest two drill holes to be completed (CP-06-53 and 54). Both holes have intersected epithermal stockwork veining. Drilling is continuing along strike and downdip to confirm the grade, widths and orientation of the mineralization.

Drilling is comprised of HQ or NQ diamond core, with recovery close to 100 per cent. The samples are sawed half core and were assayed at ALS Chemex's Vancouver Laboratory by fire assay, with an ICPAES or gravimetric finish. Sample preparation was performed by Chemex's prep facility in Quito. As part of quality assurance and quality control (QA/QC), certified standards of known gold content are inserted every 20 samples, blanks every 25 samples, and field and lab blind duplicates taken every 25 samples. Additional blanks are inserted in the sample stream when visible gold is observed. Metallic screen fire assaying is in progress as an additional (QA/QC) check of the higher-grade intervals. Half core samples have been retained on site for verification and reference purposes.

Stephen Leary, MAusIMM, is acting as qualified person, in compliance with National Instrument 43-101, with respect to this release. He has reviewed the contents for accuracy.

We seek Safe Harbor.